Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
HS4040xAQx Series
RoHS
Description
The HS4040xAQx series of SCRs offer fast turn-off time
(tq) characteristics required for applications such as power
inverters, switching regulator, and high frequency pulse
circuits.
These fast turn-off time SCRs offer high dv/dt and
high
di/dt characteristics required in higher frequency
(>1000 PPS) switching circuits and a higher temperature
environment.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 400 V
Main Features
Symbol
• Surge capability up to
520 A
• TO-220 and TO-263
packages
• AEC-Q101 Fully compliant
• 150°C maximum junction
temperature
Value
Unit
IT(RMS)
40
A
Applications
VDRM /VRRM
400
V
15 to 65
mA
Fast turn-off time SCRs are ideal for multi phase voltage
regulator circuits, DC/AC inverters, and higher frequency
pulsing power supplies.
IGT
Schematic Symbol
A
K
G
Absolute Maximum Ratings
Parameter
Test Conditions
Value
Unit
IT(RMS)
Symbol
RMS on-state current
TC = 115°C
40
A
IT(AV)
Average on-state current
A
ITSM
I 2t
di/dt
IGM
PG(AV)
Tstg
TJ
VDSM/VRSM
HS4040xAQx
Series
S4040xQx Series
TC = 115°C
25.0
single half cycle; f = 50Hz;
TJ (initial) = 25°C
430
single half cycle; f = 60Hz;
TJ (initial) = 25°C
520
I2t Value for fusing
tp = 8.3 ms
1122
A2s
Critical rate of rise of on-state current
f = 60Hz ; TJ = 150°C
175
A/μs
Peak gate current
TJ = 150°C
3.5
A
Average gate power dissipation
TJ = 150°C
Peak non-repetitive surge current
A
0.8
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 150
°C
500
V
Peak non-repetitive blocking voltage
Pw=100 μs
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Test Conditions
IGT
VD = 12V; RL = 30 Ω
VGT
HS4040xAQ
HS4040xAQ2
HS4040xAQ3
MAX.
35
45
65
MIN.
15
30
38
75
95
MAX.
Unit
mA
1.5
V
IGT
VD = 12V; RL = 30Ω; TJ = -40°C
MAX.
160
mA
dv/dt
VD = VDRM; gate open; TJ = 150°C
MIN.
550
V/μs
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 150°C
MIN.
0.2
V
IH
IT = 400mA (initial)
MAX.
70
120
200
mA
tq
IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
15
12
5
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 80A
3.5
μs
HS4040xAQ3
Unit
1.8
V
TYP.
3.0
Static Characteristics
Symbol
Test Conditions
VTM
IT = 80A; tp = 380μs
IDRM / IRRM
VDRM / VRRM
HS4040xAQ
MAX.
HS4040xAQ2
1.6
TJ = 25°C
10
TJ = 125°C
2000
MAX.
TJ = 150°C
μA
4000
Thermal Resistances
Symbol
Rθ(J-C)
Parameter
Value
Unit
Junction to case (AC)
0.6
°C/W
Figure 1: Normalized DC Holding Current vs. Junction
Temperature
Figure 2: N
ormalized DC Gate Trigger Current vs.
Junction Temperature
3.0
2.5
2.0
HS4040xQ/xQ2
1.5
1.0
HS4040xQ3
0.5
0.0
-40
HS4040xAQx Series
S4040xQx Series
-15
10
35
60
85 110 135 150
Junction Temperature (T J) – (ºC)
Ratio of IGT / IGT (TJ = 25ºC)
Ratio of IH / IH (TJ = 25ºC)
3.0
2.5
2.0
HS4040xQ3
1.5
1.0
HS4040xQ/xQ2
0.5
0.0
-40
-15
10
35
60
85 110 135 150
Junction Temperature (T J) – (ºC)
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Figure 3: Normalized DC Gate Trigger Voltage vs.
Junction Temperature
Figure 4: O
n-State Current vs. On-State Voltage
(Typical)
90
HS4040xQ3
1.2
Postitive or Negative Instantaneous
On-State Current (IT) - Amps
Ratio of VGT / VGT (TJ = 25ºC)
1.4
1.0
HS4040xQ/xQ2
0.8
0.6
0.4
0.2
0.0
-40
-15
60
HS4040xQ/xQ2
50
HS4040xQ3
40
30
20
10
0
0.8 0.9
1
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
Postitive or Negative Instantaneous
On-State Voltage (VT) - Volts
Figure 6: M
aximum Allowable Case Temperature
vs. RMS On-State Current
50
150
45
145
40
140
Maximum Allowable
Case Temperature (TC )- °C
Average On - State Power Dissipation
[PD(AV) ] - (Watts)
70
10
35
60
85 110 135 150
Junction Temperature (T J) – (ºC)
Figure 5: Power Dissipation (Typical) vs. RMS On-State
Current
35
30
HS4040xQ3
25
20
HS4040xQ/xQ2
15
10
135
130
125
120
115
110
105
100
5
0
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
95
0
5
10
15
20
25
30
35
90
40
0
5
10
15
20
25
30
35
40
45
50
RMS On-State Current [IT(RMS)] - Amps
RMS On - State Current [I T(RMS)] -(Amps)
Figure 7: Maximum Allowable Case Temperature
vs. Average On-State Current
Figure 8: Peak Capacitor Discharge Current
150
10000
Peak Discharge Current (ITM) - Amps
Maximum Allowable
Case Temperature (TC) - °C
145
140
135
130
125
120
115
110
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
105
5
10
tW
15
20
Average On-State Current [IT(AVE)] - Amps
HS4040xAQx
Series
S4040xQx Series
ITRM
100
100
0
1000
25
0.5
1.0
10.0
50.0
Pulse Current Duration (tw) - ms
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Figure 9: Peak Capacitor Discharge Current Derating
1.2
Normalized Peak Current
1.0
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 10: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
HS4040xAQx
Series
S4040xQx Series
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Physical Specifications
Environmental Specifications
Test
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification V-0
Lead Material
Copper Alloy
Specifications and Conditions
AC Blocking
Biased Temperature
& Humidity
Temperature Cycling
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 150°C for 1008 hours
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C;
85% rel humidity
JESD22 A-104 Appendix 6
-55°C to 150°C, 15-minute dwell,
1000 cycles
Intermittent
Operational Life
TA=25C, ΔTJ ≥ 100°C, 1008hrs
Autoclave (Pressure
Cooker Test)
EIA/JEDEC: JESD22-A102
121°C, 100%RH, 15psig, 96hours
Resistance to
Solder Heat
JESD22 A-111: 260°C, 10 seconds
Solderability
ANSI/J-STD-002, category 3, Test A
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
O
A
E
Dimension
8.13
.320
P
ANODE
A
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
HS4040xAQx
Series
S4040xQx Series
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Dimensions – TO- 263 (N-package) — D2-Pak Surface Mount
TC MEASURING POINT
B
Dimension
E
ANODE
8.41
.331
7.01
.276
A
S
W
U
K
GATE
CATHODE
G
J
H
D
8.13
.320
F
11.68
.460
2.16
.085
7.01
.276
7.01
.276
16.89
.665
8.89
.350
Inches
AREA: 0.11 in 2
C
V
1.40
.055
3.81
.150
Millimeters
Min
Max
Min
Max
A
0.360
0.370
9.14
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.63
0.89
E
0.048
0.055
1.22
1.40
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.083
0.093
2.11
2.36
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.87
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
2.03
.080
6.60
.260
Part Numbering System
HS4040 R A Q
Part Marking System
56
TO-220 AB - (R Package)
TO-263 (N Package)
Lead Form Dimensions
xx: Lead Form Option
DEVICE TYPE
HS: SCR
VOLTAGE RATING
40: 400V
TURN-OFF TIME
[blank]: 15μs
2: 12μs
3: 5μs
CURRENT RATING
40: 40A
HS4040RAQ3
YM
LOW TURN OFF TIME TYPE
®
PACKAGE TYPE
R: TO-220 (Non-isolated)
N: TO-263 (D 2 - Pak)
AEC-Q101
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
HS4040xAQx
Series
S4040xQx Series
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
Teccor® brand Thyristors
40 Amp High Temperature Low Tq SCR
Product Selector
Part Number
Voltage
400V
Gate Sensitivity
Type
Package
15-35
Standard SCR
TO-220AB
HS4040RAQ
X
HS4040NAQ
X
15-35
Standard SCR
TO-263
HS4040RAQ2
X
30-45
Standard SCR
TO-220AB
HS4040NAQ2
X
30-45
Standard SCR
TO-263
HS4040RAQ3
X
38-65
Standard SCR
TO-220AB
HS4040NAQ3
X
38-65
Standard SCR
TO-263
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
HS4040RAQTP
HS4040RAQ
2.2g
Tube
500 (50 per tube)
HS4040RAQ2TP
HS4040RAQ2
2.2g
Tube
500 (50 per tube)
HS4040RAQ3TP
HS4040RAQ3
2.2g
Tube
500 (50 per tube)
HS4040NAQRP
HS4040NAQ
1.6g
Embossed Carrier
500
HS4040NAQ2RP
HS4040NAQ2
1.6g
Embossed Carrier
500
HS4040NAQ3RP
HS4040NAQ3
1.6g
Embossed Carrier
500
Reel Pack (RP) for TO-263 Embossed Carrier Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
DIA
(1.5)
0.945
(24.0)
0.827
(21.0)
Cathode
*
* Cover tape
Anode
0.512 (13.0) Arbor
Hole Dia.
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
HS4040xAQx Series
S4040xQx Series
©2016 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/11/16
很抱歉,暂时无法提供与“HS4040NAQ2RP”相匹配的价格&库存,您可以联系我们找货
免费人工找货