LCA710

LCA710 60V, 1A Single-Pole Normally Open Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 60 1 0.5 Units VP Arms / ADC  Features • Low On-Resistance: 0.5 • High Current Handling Capability: 1A • 3750Vrms Input/Output Isolation • Low Drive Power Requirements • Greater Reliability than Electromechanical Relays • No EMI/RFI Generation • Small 6-Pin Packages • Flammability Rating UL 94 V-0 • Surface Mount and Tape & Reel Versions Available Applications • • • • • • • • • Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment—Patient/Equipment Isolation Security Industrial Controls Description The LCA710 is a 60V, 1A, 0.5, normally open (1-Form-A) solid state relay featuring low on-resistance and high current handling capability. It uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient infrared LED. The LCA710 can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • TUV EN 62368-1: Certificate # B 082667 0008 Ordering Information Part # LCA710 LCA710R LCA710RTR LCA710S LCA710STR Description 6-Pin DIP (50/Tube) 6-Pin Lo-Profile Surface Mount (50/Tube) 6-Pin Lo-Profile Surface Mount (1000/Reel) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration 1 + Control – Control Do Not Use 6 2 5 3 4 Switching Characteristics of Normally Open Devices Load Do Not Use Form-A Load IF DC Only Configuration 90% + Control – Control Do Not Use DS-LCA710-R11 1 6 2 5 3 4 10% ILOAD + Load ton – Load www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION LCA710 Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature, Ambient Storage Temperature 1 Derate linearly 1.33 mW / ºC 2 Derate output power linearly 6.67 mW / ºC Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical Characteristics @ 25ºC Parameter Output Characteristics Blocking Voltage Load Current Continuous, AC/DC Configuration Continuous, DC Configuration Peak On-Resistance 1 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units IL=1A VDRM 60 - - VP - IL - - t