LCW012P00SDY

LCW Series Subminiature Sealed Snap-acting Switches Features/Benefits • Compact design • Quick connect, solder terminals, PC terminals, wire leads • Wide variety of actuator styles • RoHS compatible, RoHS  compliant • IP67 • New generation price competitive UL61058-1 Typical Applications • Motorized equipment • Sump pump • Thermostatic controls • Computers • Air conditioners Specifications Materials CONTACT RATING: from low level to 0.1 Amp ELECTRICAL LIFE: 10,000 cycles INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 1,000 VAC OPERATING TEMPERATURE: -40ºC to +120ºC OPERATING FORCE: (see ACTUATOR’S option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. SWITCH HOUSING: PBT SWITCH COVER: PBT ACTUATOR BUTTON: PBT SPRING: SUS MOVABLE CONTACTS: Copper STATIONARY CONTACTS: AgNi10 TERMINALS: Brass. ACTUATOR LEVEL: SUS RUBBER: Silicone NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Snap-acting J NEW Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-44 thru J-47. For additional options not shown in catalog, consult Customer Service Center. L C W Series LCW Electrical Rating Option Code 01 UL  61058-1 0.1 A 125/250 V AC 14 NA Operating Force 2 203 grams Circuitry C SPDT W SPST N.C. Y SPST N.O. Actuator P00 Pin plunger T00 12 mm short lever T05 17.5 mm short lever T07 19.5 mm short lever T13 25.6 mm lever S26 18.6 mm simulated lever Terminations S Solder Q 0.110 Quick Connect P PC Thru Hole W Wire leads potted Wire Side A Wire out the bottom (check if available) B Wire out the right side (check if available) D None (Default) Dimensions are shown: mm Specifications and dimensions subject to change 26 Feb 19 J–44 www.ckswitches.com LCW Series Subminiature Sealed Snap-acting Switches NEW SERIES OVERTRAVEL (OT) FREE POSITION (FP) OPERATING POSITION (OP) LCW J Snap-acting ELECTRICAL RATING RoHS COMPLIANT * RoHS COMPATIBLE * OPTION CODE YES YES 01 ELECTRICAL RATING 0.1 AMP, 125/250 V AC OPERATING FORCE OPTION CODE OPERATING FORCES (grams) 2 203 g. max. Dimensions are shown: mm Specifications and dimensions subject to change 26 Feb 19 J–45 www.ckswitches.com LCW Series Subminiature Sealed Snap-acting Switches 20.95 REF NEW ACTUATOR 7.15 REF 19.4 33.3 T07 P00 13.3 28.35 REF 0.2 REF 40.7 25.5 11.9 T00 T13 43.55 REF 5.1 REF 55.9 17.4 T05 S26 Snap-acting J C C E C E D B A B C D E Length of Lever Overtravel (min) Pretravel (max) Operating Position Free Position (max) P00 Not Applicable 0.6 1 8.7±0.3 T00 12 0.6 4.9 T05 17.5 0.6 T07 19.5 T13 S26 Actuator Option Code E D D B Differential Motion (max) Operating Force (Max) Release Force (Min) 9.4 0.9 203 30 8.8±1.2 12.5 1 100 15 5.7 8.8±1.5 13 1.2 90 10 0.6 6.2 8.8±1.5 13.5 1.2 70 10 25.6 1 4.7 8.8-11.24 13.5 1.5 54 5 18.6 0.6 4.6 10.7±1.2 14.1 1.5 68 5 Dimensions are in mm and force in grams Dimensions are shown: mm Specifications and dimensions subject to change 26 Feb 19 J–46 www.ckswitches.com LCW Series Subminiature Sealed Snap-acting Switches NEW TERMINATIONS S  SOLDER Q  QUICK CONNECT 2.8mm / 0.110” P  PC THRU HOLE J Snap-acting W  “B” WIRE ORIENTATION OUT THE RIGHT SIDE W   “A” WIRE ORIENTATION OUT THE BOTTOM “W” CIRCUITRY “W” CIRCUITRY CIRCUITRY C  SPDT (Single Pole, Double Throw) W  SPST N.C. (Single Pole, Single Throw, Normally Closed) Y  SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: mm Specifications and dimensions subject to change 26 Feb 19 J–47 www.ckswitches.com