LF400CLIP

PART NUMBER 03DP-100-026 03DP-100-027 PARTS LIST DESCRIPTION Clip Reinforcing Clip QTY 1 1 BASE UNIT Each Each REV DATE A 11/10/2008 REVISION DESCRIPTION 000531ER - RELEASE PER SALES RELEASE EM998 LDL 2 +.062 .125 - .030 +1.57 3.18 0.76 [ 1 ] DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK 2.438 `.062 [61.93 `1.57] ITEM 1 2 CP MATL SPEC .250 [6.35] +.062 1.750 .015 +1.57 44.45 0.38 [ ] DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. ? .750 `.030 [19.05 `0.76] FINISH DRW DATE llogan 11/10/2008 SCALE B FINISH GOOD WT 1:1 GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION 1.500 [38.10] TOLERANCE UNLESS OTHERWISE SPECIFIED ONE PLACE DEC ± .25 [.01] FRACTION ± TWO PLACE DEC ± .100 [.004] ANGULAR ±1º TITLE 400A FUSE CLIP Littelfuse ® DES PLAINES, ILLINOIS 60016 REVISION A DRWG NO. LF400CLIP SHEET 1 OF 1