LRU616

Miscellaneous Products Miscellaneous Products Fuse Reducers Littelfuse fuse reducers allow smaller size fuses to be installed into existing fuse clips to prevent overfusing. • • • • • Allows lower ampere-rated fuses to be used in existing fuse clips. Simple installation. Reduces inventory requirements. Silver brazed joints for maximum strength. UL Listed (File No. E136855) CSA Certified (File No. LR92899) Refer to fuse section of this catalog for fuse di­men­sions. Class H/K5 Fuse Reducers For use with Littelfuse NLN/NLS and RLN/RLS series fuses. 250 Volt 600 Volt Part No. (pair) Fuse Clip Fuse Case Size Part No. (pair) Fuse Clip Fuse Case Size LRU 263 M LRU 213 M LRU 216 LRU 226 LRU 2621 LRU 2641 LRU 2642 LRU 2661 LRU 2662 LRU 2664 60A 100A 100A 200A 200A 400A 400A 600A 600A 600A 30A 30A 60A 60A 100A 100A 200A 100A 200A 400A LRU 663 M LRU 216 LRU 616 LRU 626 LRU 2621 LRU 2641 LRU 2642 LRU 2661 LRU 2662 LRU 2664 60A 100A 100A 200A 200A 400A 400A 600A 600A 600A 30A 30A 60A 60A 100A 100A 200A 100A 200A 400A 250 Volt Class R Fuse Reducers Class J Fuse Reducers For use with Littelfuse JTD_ID/ JTD and JLS series fuses. Fuse Clip LRU 263 R 60A LRU 213 R 100A LRU 216 R 100A LRU 226 R 200A LRU 2621 R 200A LRU 2641 R 400A LRU 2642 R 400A LRU 2661 R 600A LRU 2662 R 600A *LRU 2664 R 600A * Only one reducer required. Fuse Case Size 30A 30A 60A 60A 100A 100A 200A 100A 200A 400A Part No. (pair) Fuse Clip LRU 663 R 60A LRU 216 R 100A LRU 616 R 100A LRU 626 R 200A LRU 2621 R 200A LRU 2641 R 400A LRU 2642 R 400A LRU 2661 R 600A LRU 2662 R 600A *LRU 2664 R 600A * Only one reducer required. Fuse Case Size 30A 30A 60A 60A 100A 100A 200A 100A 200A 400A Misc. Products For use with Littelfuse FLNR_ID/ FLSR_ID, IDSR, LLNRK/LLSRK, LLSRK_ID, and KLNR/KLSR series fuses. Part No. (pair) 600 Volt 600 Volt Part No. (pair) Fuse Clip Fuse Case Size LRUJ63 LRUJ13 LRUJ16* LRUJ26 LRUJ21 LRUJ41 LRUJ42 LRUJ64 60A 100A 100A 200A 200A 400A 400A 600A 30A 30A 60A 60A 100A 100A 200A 400A © 2005 Littelfuse • POWR-GARD™ Products Catalog www.littelfuse.com * Fuse and reducer com­bi­na­tion is slightly larger in diameter than 100A Class J fuses. For specific ap­pli­ca­tions, contact factory. Class J reducers can not be used in bolt-on applications. 157