MBR20100CTP

Schottky Barrier Rectifier MBR20100CT, 2x 10A, 100V, TO-220AB, Common Cathode MBR20100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power Supply, free-wheeling diodes and polarity protection diodes. Features • H  igh junction temperature capability Pin out Heat sink • G  uard ring for enhanced ruggedness and long term reliability Heat sink Common Cathode Common Cathode • H  igh frequency operation • C  ommon cathode configuration in TO-220AB package • Low forward voltage drop Applications 1 3 Anode Anode Pinout 1 D2-PAK & D-PAK Common Cathode 1 3 2 Maximum Ratings Parameters Symbol Common Cathode Cathode Peak One Cycle Non-Repetitive 1 2 Current (per leg) Cathode I F(AV) Surge 3 Electrical Characteristics Pinout 4 ITO-220AB Common Anode Parameters IFSM Cathode • DC/DC converters • Polarity protection diodes diodes Max Unit - 100 V 50% duty cycle @TC =105°C rectangular wave form 10 (per leg) 20 (total device) 8.3 ms, half Sine pulse 150 A Test Conditions Max Unit A Anode 1 Forward Voltage Drop (per leg) * • S  witching mode power 3 supply Pinout 3 ITO-220AB Common Cathode Test Conditions VRWM Heat sink Average Forward Current 2 Anode Common Anode Cathode • Free-wheeling Pinout 2 TO-220AB Common Cathode Peak Inverse Voltage Anode 1 Anode Common Anode Cathode 2 Pinout 5 Symbol TO-220AC VF1 VF2 @ 10A, Pulse, TJ = 25 °C 0.90 @10A, Pulse, TJ = 125 °C 0.80 V Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 6.0 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C, fSIG = 1MHz 300 pF LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Typical Series Inductance (per leg) Voltage Rate of Change * Pulse Width < 300μs, Duty Cycle