MBRF10100CTR

Schottky Barrier Rectifier MBRF10100CTR, 2x 5A, 100V, ITO-220AB, Common Anode MBRF10100CTR RoHS Heat sink Common Cathode 1 3 Anode Anode Pinout 1 D2-PAK & D-PAK Common Cathode Heat sink Description Common Cathode Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power 1 3 2 1 3 and polarity protection 2 diodes Common Anode Anode supply, free-wheeling Anode Common Anode Cathode diodes. Cathode Pinout 2 TO-220AB Common Cathode Features • H  igh junction Pinout 3 temperature ITO-220AB capability Common Cathode • Guard ring for enhanced ruggedness and long term reliability Heat sink Pin out Cathode • Low Cathode Common Cathode 2 • H  igh frequency operation • C  ommon anode configuration in electrically isolated ITO220AB package forward voltage drop Applications Anode 1 Pb 3 Cathode 1 Pinout 4 ITO-220AB Common Anode Maximum Ratings • S  witching mode power Anode supply • DC/DC converters • Polarity protection diodes 2 • Free-wheeling diodes Pinout 5 TO-220AC Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage VRWM - 100 V IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 5 (per leg) Average Forward Current 10 (total device) Peak One Cycle Non-Repetitive Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 120 A A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.85 VF2 @ 5A, Pulse, TJ = 125 °C 0.75 IR1 @VR = rated VR TJ = 25 °C 1 IR2 @VR = rated VR TJ = 125 °C 15 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle