MBRF10150CTL

Schottky Barrier Rectifier MBRF10150CTL, 2x 5A, 150V, ITO-220AB, Common Cathode MBRF10150CTL Pb RoHS Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H  igh junction temperature capability Pin out Heat sink on e • G  uard ring for enhanced ruggedness and long term reliability Common Cathode • H  igh frequency operation • Common  cathode configuration in electrically isolated ITO220AB package • Low forward voltage drop 3 ode K e 1 3 2 1 Anode Common Anode Cathode 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Maximum Ratings • DC/DC converters • Polarity protection diodes • Free-wheeling diodes Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage VRWM - 150 V Average Forward Current IF(AV) 50% duty cycle @TC = 100°C, rectangular wave form 10 (total device) Peak One Cycle Non-Repetitive Cathode Anode Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 138 Cathode 3 • S  witching mode power supply Pinout 3 ITO-220AB Common Cathode Heat sink Cathode Applications 3 1 5 (per leg) A 2 Pinout 5 Electrical Characteristics TO-220AC Parameters Symbol VF1 Forward Voltage Drop (per leg) * VF2 Test Conditions Max @ 3A, Pulse, TJ = 25 °C 0.87 @ 5A, Pulse, TJ = 25 °C 0.93 @ 3A, Pulse, TJ = 125 °C 0.67 Unit V @ 5A, Pulse, TJ = 125 °C 0.73 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 7 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 200 pF Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 mA V * Pulse Width < 300μs, Duty Cycle