MBRF10200CT

Schottky Barrier Rectifier MBRF10200CT, 2x 5A, 200V, ITO-220AB, Common Cathode MBRF10200CT Pb RoHS Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H  igh junction temperature capability Pin out Heat sink • H  igh frequency operation • C  ommon cathode configuration in electrically isolated ITO220AB package • G  uard ring for enhanced ruggedness and long term reliability Common Cathode • Low forward voltage drop 1 2 3 1 Anode Common Anode Cathode 2 Applications 3 • S  witching mode power supply Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode • DC/DC converters • Polarity protection diodes • Free-wheeling diodes Pinout 3 ITO-220AB Maximum RatingsCommon Cathode Parameters Symbol Peak Inverse Voltage VRWM Average Forward Current 10 (total device) Peak One Cycle Non-Repetitive Surge Anode Current (per leg) 128 Heat sink Cathode hode Cathode Test Conditions Max Unit - 200 V IF(AV) 50% duty cycle @TC =105°C, rectangular wave form 5 (per leg) IFSM 8.3 ms, half Sine pulse A A 1 2 Electrical Characteristics Pinout 5 TO-220AC Parameters Forward Voltage Drop (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.98 VF2 @ 5A, Pulse, TJ = 125 °C 0.78 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 7.0 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 150 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle