MBRF20100CTP

Schottky Barrier Rectifier MBRF20100CTP, 2x 10A, 100V, ITO-220AB, Common Cathode MBRF20100CTP RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H  igh junction temperature capability Pin out Heat sink mon ode • H  igh frequency operation • Common  cathode configuration in electrically isolated ITO220AB package • G  uard ring for enhanced ruggedness and long term reliability Common Cathode • Low forward voltage drop 3 Anode AK ode 1 3 2 1 Anode Common Anode Cathode 2 Pinout 2 TO-220AB Common Cathode • Polarity protection diodes Pinout 3 ITO-220AB Common Cathode Parameters Symbol Test Conditions Max Unit VRWM - 100 V Average Forward Current IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 20 (total device) Peak One Cycle Non-Repetitive Surge Current (per leg) Cathode Anode IFSM 8.3 ms, half Sine pulse 150 Cathode de • DC/DC converters • Free-wheeling diodes Heat Peaksink Inverse Voltage 3 • S  witching mode power supply Anode Common Anode Cathode Maximum Ratings on Cathode Applications 3 1 10 (per leg) A A 2 ElectricalPinout Characteristics 5 TO-220AC Parameters Forward Voltage Drop (per leg) * Symbol Test Conditions Max VF1 @ 10A, Pulse, TJ = 25 °C 0.90 VF2 @ 10A, Pulse, TJ = 125 °C 0.80 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 6 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 250 Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body Voltage Rate of Change dv/dt RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Unit V mA pF 8.0 nH 10,000 V/μs Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle