MBRF2060CT

Schottky Barrier Rectifier MBRF2060CT 2x 10A, 60V, ITO-220AB, Common Cathode MBRF2060CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out Heat sink mmon hode • H  igh junction temperature capability Common Cathode • H  igh frequency operation • C  ommon cathode configuration in electrically isolated ITO220AB package • G  uard ring for enhanced ruggedness and long term reliability 3 Anode PAK ode 1 2 3 1 Anode Common Anode Cathode 2 • Low forward voltage drop 3 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications • S  witching mode power supply Pinout 3 ITO-220AB Common Cathode • DC/DC converters • Polarity protection diodes • F  ree-wheeling diodes Maximum Ratings Heat sink Cathode on Cathode 3 de Parameters Symbol Peak Inverse Voltage VRWM 20 (total device) 150 Average Cathode Forward Current Anode 2 Peak1One Cycle Non-Repetitive Surge Current (per leg) Pinout 5 TO-220AC Test Conditions Max Unit - 60 V IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 10 (per leg) IFSM 8.3 ms, half Sine pulse A A Electrical Characteristics Parameters Symbol Test Conditions Max Forward Voltage Drop (per leg) * VF1 @ 10A, Pulse, TJ = 25 °C 0.8 V Reverse Current (per leg) * IR1 @VR = rated VR Pulse, TJ = 25 °C 1.0 mA Junction Capacitance (per leg) CT @VR = 4V, TC = 25 °C, fSIG = 1MHz Voltage Rate of Change dv/dt RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Unit 400 pF 10,000 V/μs Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle