MBRF3060CT

Schottky Barrier Rectifier MBRF3060CT 2x 15A, 60V, ITO-220AB, Common Cathode MBRF3060CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out nk Heat sink ommon athode • H  igh junction temperature capability Common Cathode • H  igh frequency operation • Common  cathode configuration in electrically isolated ITO220AB package • G  uard ring for enhanced ruggedness and long term reliability 3 Anode 1 -PAK thode 1 2 3 Anode Common Anode Cathode 1 2 • Low forward voltage drop 3 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications • S  witching mode power supply Pinout 3 ITO-220AB Common Cathode • DC/DC converters • Polarity protection diodes • F  ree-wheeling diodes Maximum Ratings Heat sink Cathode mmon Cathode de 3 4 AB node Parameters Symbol Peak Inverse Voltage VRWM 30 (total device) 200 Average Current Cathode Forward Anode 1 Cycle Non-Repetitive 2 Peak One Surge Current (per leg) Pinout 5 TO-220AC Test Conditions Max Unit - 60 V IF(AV) 50% duty cycle @TC = 95°C, rectangular wave form 15 (per leg) IFSM 8.3 ms, half Sine pulse A A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 15A, Pulse, TJ = 25 °C 0.70 VF2 @ 15A, Pulse, TJ = 125 °C 0.67 IR1 @VR = rated VR TJ = 25 °C 1.0 IR2 @VR = rated VR TJ = 125 °C 100 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 700 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle