MHP-TAM6-9-85

Metal Hybrid PPTC Devices PRODUCT: MHP-TAM6-9-85 DOCUMENT: SCD28761 REV LETTER: G REV DATE: JULY 26, 2016 PAGE NO.: 1 OF 2 Overtemperature Protection Device Specification Status: Released Electrical Rating Contact Rating DC9V/12A (6000 cycles) Maximum Breaking Current DC5V/40A (100 cycles) Minimum Hold Voltage Maximum Leakage Current 2V 200mA Leads: Copper based alloy Case: LCP Marking: ・□□□□□□□ - Lot Identification ・□ □□ – Control Number, Company logo ・TAM6-85 - Part Name Notes: Unspecified dimensions, tolerance should be +/-0.1mm Dimensions in brackets are for reference TABLE I. DIMENSIONS: A MIN 10.9 mm: MAX 11.4 B MAX 1.15 C MIN 3.75 D MAX 3.85 MIN 2.6 E MAX 2.8 MIN 2.6 MAX 2.8 TABLE II. PERFORMANCE RATINGS: OPERATION TEMPERATURE RESET TEMPERATURE RESISTANCE °C °C mohms @ 25°C MIN 80 1 TYP 85 MAX 90 MIN 40 T1 10 TYP 10 MAX 15 HOLD CURRENT Amp @ 25°C MIN 6 Amp @ 70°C MIN 2.5 T is the minimum temperature differential between the actual operation temperature of the device and the reset temperature © 2016 Littelfuse,Inc Specifications are subject to change without notice. Revised July 26, 2016 Littelfuse.com Metal Hybrid PPTC Devices Overtemperature Protection Device PRODUCT: MHP-TAM6-9-85 DOCUMENT: SCD28761 REV LETTER: G REV DATE: JULY 26, 2016 PAGE NO.: 2 OF 2 ELECTRICAL PERFORMANCE (Typical): Open Time vs. Current Curves – @ 25°C & 60°C Hold Current vs. Temperature Curve OPERATION TEMPERATURE RANGE -30～100℃ Agency Recognitions: Reference Documents: Precedence: Effectivity: UL, cUL: E349829, CB PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION Please refer to the MHP-TAM series device usage guidelines. Using the products outside the recommended guidelines may result in device damage. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free Halogen Free* *Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, lifesustaining, nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. © 2016 Littelfuse,Inc Specifications are subject to change without notice. Revised July 26, 2016 Littelfuse.com