MICROSMD035-2

R Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 PRODUCT: microSMD035 DOCUMENT: SCD 24367 PCN: 672499 REV LETTER: C REV DATE: JULY 23, 1999 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices Overcurrent Protection Device Specification Status: RELEASED Maximum Electrical Rating Voltage: 6.0V DC Current: 40A Notes: 1. All terminations are tin/lead plated. 2. Devices can be wave soldered. 3. Drawing not to scale Marking: 3 PART IDENTIFICATION MANUFACTURER'S MARK TABLE I. DIMENSIONS: A MIN 3.00 mm : in: 0.118 MAX 3.43 MIN 2.35 B MAX 2.80 MIN 0.38 C MAX 0.62 D MIN 0.30 E MIN 0.25 0.135 0.092 0.110 0.015 0.025 0.012 0.010 TABLE II. PERFORMANCE RATINGS: IHOLD ** HOLD CURRENT AT TEMPERATURE** TIME TO RATED TRIP ** CURRENT AMPERES AMPERES AMPERES AMPERES SECONDS AT 20°C AT 0°C AT 20°C AT 60°C AT 20°C, 8A HOLD HOLD HOLD TRIP HOLD MAX 0.35 0.40 0.35 0.75 0.24 0.2 RESISTANCE VALUES OHMS AT 20°C MIN MAX* 0.32 1.30 ** TRIPPED-STATE POWER DISSIPATION WATTS AT 20°C, 6V MAX 0.8 * Maximum resistance is measured 1 hour after reflow. **Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS300, E. N. SMD1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.