P0640SDRP

SIDACtor ® Protection Thyristors High Surge Current Protection High Surge Current Series - DO-214 Description The High Surge Current DO-214 Series are SIDACtor® devices designed to protect equipment located in hostile environments from overvoltage transients. The series provides a 200A 10/1000 μs rated surface mount solution that enables equipment to comply with enhanced surge requirments now specified in regulatory and customer requirements. Features and Benefits Agency Approvals Agency Agency File Number t
Low on-state voltage t
200A 10x1000 Surge Rating t
Does not degrade with use t
1000A 2x10 Surge Rating High Surge Current Series t
Low voltage overshoot t
Fails short circuit when surged in excess of ratings E133083 Pinout Designation Applicable Global Standards Not Applicable Schematic Symbol t
TIA-968-A t
IEC 61000-4-5 t
ITU K.20/21 Enhanced Level t
YD/T 1082 t
ITU K.20/21 Basic Level t
YD/T 950 t
YD/T 993 t
GR 1089 Inter-building t
GR 1089 Intra-building Electrical Characteristics Part Number P0080SDLRP P0640SDLRP P0720SDLRP P0900SDLRP P1100SDLRP P1300SDLRP P1500SDLRP P1800SDLRP P2300SDLRP P2600SDLRP P3100SDLRP P3500SDLRP Marking P-8D P06D P07D P09D P11D P13D P15D P18D P23D P26D P31D P35D VDRM @lDRM=5μA VS @100V/μs V min V max 6 58 65 75 90 120 140 170 190 220 275 320 25 77 88 98 130 160 180 220 260 300 350 400 IS IT** mA min mA max A max 50 50 50 50 50 50 50 50 50 50 50 50 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are uni-directional ** Will meet 4.4A power cross requirement without fire hazard. © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. IH 183 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT=2.2A Capacitance @1MHz, 2V bias V max pf min pF max 4 4 4 4 4 4 4 4 4 4 4 4 50 100 100 95 75 65 60 50 50 50 45 45 150 160 150 140 115 100 90 90 80 75 70 65 SIDACtor ® Protection Thyristors High Surge Current Protection Series Surge Ratings D IPP ITSM 50/60 Hz di/dt A min A min A/μs max — 50 1000 0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min — 1000 800 — — — — 200 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP
SBUJOHT
BQQMJDBCMF
PWFS
UFNQFSBUVSF
SBOHF
PG
$
UP
$ - The device must initially be in thermal equilibrium with -40°C < TJ