P0642SA

%URDGEDQG2SWLPL]HGŒ6,'$&WRUŠ'HYLFH RoHS ¨ The DO-214AA SIDACtor Broadband Optimized protection devices are intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values are 40% lower than standard devices. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). Electrical Parameters Part Number * VDRM Volts VS Volts VT Volts IDRM μAmps IS mAmps IT Amps IH mAmps P0642S_L 58 77 4 5 800 2.2 120 P0722S_L 65 88 4 5 800 2.2 120 P0902S_L 75 98 4 5 800 2.2 120 P1102S_L 90 130 4 5 800 2.2 120 P1302S_L 120 160 4 5 800 2.2 120 P1502S_L 140 180 4 5 800 2.2 120 P1802S_L 170 220 4 5 800 2.2 120 P2302S_L 190 260 4 5 800 2.2 120 P2602S_L 220 300 4 5 800 2.2 120 P3002S_L 280 360 4 5 800 2.2 120 P3502S_L 320 400 4 5 800 2.2 120 P4202S_L 190 250 8 5 800 2.2 120 P4802S_L 440 600 4 5 800 2.2 120 P6002S_L 275 350 8 5 800 2.2 120 * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. General Notes: • All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VDRM is measured at IDRM. • VS is measured at 100 V/μs. • Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Surge Ratings in Amps Series IPP 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** 10x160 * 10x160 ** 10x560 * 10x560 ** 5x320 * 9x720 ** ITSM 10x360 * 10x1000 * 5x310 * 50 / 60 Hz di/dt 10x360 ** 10x1000 ** 10x700 ** Amps Amps/μs Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps A 20 150 150 90 50 75 75 45 75 20 Amps 500 B 25 250 250 150 100 100 125 80 100 30 500 * Current waveform in μs ** Voltage waveform in μs www.littelfuse.com 3 - 16 © 2006 Littelfuse, Inc. • Telecom Design Guide %URDGEDQG2SWLPL]HGŒ6,'$&WRUŠ'HYLFH Thermal Considerations Symbol TJ Operating Junction Temperature Range Parameter -40 to +150 °C TS Storage Temperature Range -65 to +150 °C 90 °C/W Thermal Resistance: Junction to Ambient RθJA Value Unit 5+&#%VQT&GXKEGU Package DO-214AA Capacitance Values pF Part Number * MIN MAX P0642S[A/B]L 25 45 P0722S[A/B]L 20 45 P0902S[A/B]L 20 40 P1102S[A/B]L 15 35 P1302S[A/B]L 15 35 P1502S[A/B]L 15 30 P1802S[A/B]L 10 30 P2302S[A/B]L 10 25 P2602S[A/B]L 10 25 P3002S[A/B]L 10 25 P3502S[A/B]L 10 20 P4202S[A/B]L 10 20 P4802S[A/B]L 5 20 P6002S[A/B]L 5 20 * [A/B] in part number indicates that values are for both A and B surge ratings. Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Telecom Design Guide • © 2006 Littelfuse, Inc. 3 - 17 www.littelfuse.com