P1553ABL

SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Balanced Series - Modified TO-220 RoHS Pb e3 Description The SIDACtor® Balanced Series are designed to protect baseband equipment from damaging overvoltage transients. The patented “Y” configuration also ensures balanced overvoltage protection that prevents a longitudinal to differential conversion. The series provides a single port through-hole solution that enables voice through DS-1 equipment to comply with various global requlatory standards. Features and Benefits Agency Approvals Agency • Low voltage overshoot • Single port protection • Low on-state voltage • Custom lead forms available • Does not degrade surge capability after multiple surge events within limit. Agency File Number E133083 • RoHS Compliant and Lead-Free • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) • Fails short circuit when surged in excess of ratings Pinout Designation • Low capacitance • Balanced overvoltage protection PIN 1 PIN 2 PIN 3 Applicable Global Standards Schematic Symbol 1 3 • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd edition • ITU K.20/21/45 Enhanced Level* (R) (T) • TIA-968-A • ITU K.20/21/45 Basic Level 2 (G) • YD/T 1082 • YD/T 993 • YD/T 950 • GR 1089 Inter-building* *A/B-rated parts require series resistance Electrical Characteristics Part Number Marking VS VDRM VS VDRM @lDRM=5µA @100V/µs @lDRM=5µA @100V/µs V min V max V min Pins 1-2, 3-2 P1553AALxx P1553AA 130 P1803AALxx P1803AA P2103AALxx P2353AALxx P2703AALxx P3203AALxx P3403AALxx P5103AALxx P1553ABLxx P1803ABLxx P2103ABLxx P2103AA P2353AA P2703AA P3203AA P3403AA P5103AA P1553AB P1803AB P2103AB V max Pins 1-3 180 IH IS IT VT@IT= 2.2 Amps mA min mA max A max V max 150 800 2.2 8 180 130 150 210 150 210 150 800 2.2 170 200 230 270 300 420 130 150 170 250 270 300 350 400 600 180 210 250 170 200 230 270 300 420 130 150 170 250 270 300 350 400 600 180 210 250 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 Capacitance 8 8 8 8 See Capacitance 8 Values table 8 8 8 8 8 Table continues on next page. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Part Number Marking VS VDRM VS VDRM @lDRM=5µA @100V/µs @lDRM=5µA @100V/µs V min V max V min Pins 1-2, 3-2 P2353ABLxx P2703ABLxx P3203ABLxx P3403ABLxx P5103ABLxx P1553ACLxx P1803ACLxx P2103ACLxx P2353ACLxx P2703ACLxx P3203ACLxx P3403ACLxx P5103ACLxx P2353AB P2703AB P3203AB P3403AB P5103AB P1553AC P1803AC P2103AC P2353AC P2703AC P3203AC P3403AC P5103AC 200 230 270 300 420 130 150 170 200 230 270 300 420 V max Pins 1-3 270 300 350 400 600 180 210 250 270 300 350 400 600 200 230 270 300 420 130 150 170 200 230 270 300 420 270 300 350 400 600 180 210 250 270 300 350 400 600 IH IS IT VT@IT= 2.2 Amps mA min mA max A max V max 150 150 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 8 8 8 8 8 8 8 Capacitance See Capacitance Values table Notes: - Absolute maximum ratings measured at TA= 25ºC. - Components are bi-directional. - XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form, Bulk Pack) Capacitance Values Part Number P1553AALxx P1803AALxx P2103AALxx P2353AALxx P2703AALxx P3203AALxx P3403AALxx P5103AALxx P1553ABLxx P1803ABLxx P2103ABLxx P2353ABLxx pF Pin 1-2 / 3-2 Tip-Ground, Ring-Ground MIN MAX 10 45 20 40 15 35 15 35 15 35 15 30 15 30 10 60 25 95 25 85 20 85 20 75 pF Pin 1-3 Tip-Ring MIN MAX 10 30 10 30 10 25 10 25 10 25 10 20 10 20 10 40 15 60 15 55 10 55 15 50 pF Pin 1-2 / 3-2 Part Number Tip-Ground, Ring-Ground P2703ABLxx P3203ABLxx P3403ABLxx P5103ABLxx P1553ACLxx P1803ACLxx P2103ACLxx P2353ACLxx P2703ACLxx P3203ACLxx P3403ACLxx P5103ACLxx MIN 20 20 15 15 30 30 30 25 25 25 20 20 MAX 75 70 65 60 95 85 85 75 75 70 65 60 pF Pin 1-3 Tip-Ring MIN 10 10 10 10 20 15 15 15 15 15 15 10 MAX 50 45 45 40 60 55 55 50 50 45 45 40 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Surge Ratings Series IPP ITSM 50/60 Hz di/dt A A min A min A/µs max 0.2/310 1 0.5/700 2 2/10 1 2/10 2 8/20 1 1.2/50 2 10/160 1 10/160 2 10/560 1 10/560 2 5/320 1 9/720 2 10/360 1 10/360 2 10/1000 1 10/1000 2 5/310 1 10/700 2 A min A min A min A min A min A min A min A min A 20 150 150 90 50 75 75 45 75 20 500 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 50 500 Notes: 1 Current waveform in µs 2 Voltage waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Thermal Considerations Package Symbol Modified TO-220 PIN 1 PIN 2 Value Unit TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C 50 °C/W R0JA PIN 3 Parameter Thermal Resistance: Junction to Ambient V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 °C 4 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 2 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated UL Recognized epoxy meeting flammability classification V-0 P xxx 3 A x L xx MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Part Marking Part Numbering TYPE P = SIDACtor TP Environmental Specifications Physical Specifications Body Material Figure 1 Temperature Reflow Condition XXXXXXXXX PACKING STYLE Blank: Bulk RP: Reel Pack 60: Type 60 Lead Form (for Type 60 orders, contact factory) RoHS COMPLIANT IPP RATING xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions - Modified TO-220 A Inches O D Temperature Measurement Point F G P PIN 3 PIN 2 PIN 1 L M K H Tape and Reel Specification — Modified TO-220 Min Max Min A 0.400 0.410 10.16 10.42 D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 The modified TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. 0.240 (6.10) Max L 0.060 0.075 1.52 1.90 M 0.070 0.085 1.78 2.16 N O P 0.018 0.024 0.46 0.61 0.178 0.290 0.188 0.310 4.52 7.37 4.78 7.87 N J Millimeters 0.019 (0.5) 1.626 (41.15) 0.720 (18.29) 0.750 ± 0.010 (19.05 ± 0.25) 0.360 (9.14) 0.500 (12.7) 0.100 (2.54) 0.100 (2.54) 14.173 (360.0) Dimensions are in inches (and millimeters). Direction of Feed 1.968 (50.0) Packing Options Package Type A Description Packaging Quantity Added Suffix Industry Standard Modified TO-220 Tape and Reel Pack 700 RP EIA-468-B Modified TO-220 Bulk Pack 500 N/A (no suffix required) EIA-468-B Modified TO-220 Type 60 Lead Form Bulk Pack 500 60 (special order item, contact factory for details) N/A Additional Information Datasheet Resources Samples Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17