P2000SBRP

SIDACtor ® Protection Thyristors LCAS Protection Asymmetrical Discrete Series - DO-214 Pb e3 RoHS Description The Asymmetrical Discrete Series are SIDACtor® components designed to protect LCAS (Line Circuit Access Switch) devices from damaging overvoltage transients. The series provides a specialized asymmetrical overvoltage protection solution that enables equipment to comply with various global requlatory standards. Features and Benefits • Low voltage overshoot ratings • LCAS specific tip and ring thresholds • Low on-state voltage • Does not degrade surge capability after multiple surge events within limit. Agency Approvals Agency Agency File Number E133083 • RoHS Compliant, LeadFree, and Halogen-Free • 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 • Fails short circuit when surged in excess of Pinout Designation Applicable Global Standards Not Applicable Schematic Symbol • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd edition • ITU K.20/21 Enhanced Level* • YD/T 1082 • ITU K.20/21 Basic Level • YD/T 993 • GR 1089 Inter-building* • YD/T 950 *A/B-rated parts require series resistance Additional Information Datasheet Resources Samples Electrical Characteristics Part Number P1200SALRP P2000SALRP P2500SALRP P1200SBLRP P2000SBLRP P2500SBLRP P1200SCLRP P2000SCLRP P2500SCLRP Marking P12A P20A P25A P12B P20B P25B P12C P20C P25C VDRM @lDRM=5µA VS @100V/µs IH IS IT VT @IT=2.2 A V min V max mA min mA max A max V max pF min pF max 100 180 230 100 180 230 100 180 230 130 220 290 130 220 290 130 220 290 120 120 120 120 120 120 120 120 120 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 4 4 4 15 15 15 20 20 20 20 25 30 40 35 35 50 50 50 35 35 70 Capacitance @1MHz, 2V bias Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are bi-directional. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16 SIDACtor ® Protection Thyristors LCAS Protection Series Surge Ratings A IPP ITSM 50/60 Hz di/dt A min A min Amps/µs max 75 25 500 0.2/310 1 0.5/700 2 2/10 1 2/10 2 8/20 1 1.2/50 2 10/160 1 10/160 2 10/560 1 10/560 2 5/320 1 9/720 2 10/360 1 10/360 2 10/1000 1 10/1000 2 5/310 1 10/700 2 A min A min A min A min A min A min A min A min 20 150 150 90 50 75 75 45 B 25 250 250 150 100 100 125 80 100 30 500 C 50 500 400 200 150 200 175 100 200 35 500 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C 1 Current waveform in µs 2 Voltage waveform in µs Thermal Considerations Package Symbol DO-214AA TJ TS Parameter R0JA Value Unit Operating Junction Temperature Range -40 to +150 °C Storage Temperature Range -65 to +150 °C 90 °C/W Thermal Resistance: Junction to Ambient V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 °C 4 2 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC SIDACtor ® Protection Thyristors LCAS Protection Soldering Parameters Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Physical Specifications TP tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material Figure 1 Temperature Reflow Condition UL recognized epoxy meeting flammability classification V-0 LCAS Series DO-214.EPS For pg. 154 Part Numbering High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Part Marking P xxx 0 S x L RP TYPE P: SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE REEL PACK Pxxx xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code RoHS COMPLIANT IPP RATING © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16 SIDACtor ® Protection Thyristors LCAS Protection Dimensions — DO-214AA 0.110 (2.8) 0.079 (2.0) E Dimensions 0.079 (2.0) C A H inch (millimeter) F K Inches Pad Outline Case Temperature Measurement Point B D G Min Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 K 0.006 0.016 0.15 0.41 Packing Options Package Type S Description Quantity Added Suffix Industry Standard DO-214AA Tape & Reel Pack 2500 RP EIA-481-D Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.059 DIA (1.5) 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. 0.49 (12.4) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/16 Millimeters Max Cover tape Dimensions are in inches (and millimeters). Direction of Feed