P2602GBLRP

SIDACtor ® Protection Thyristors Broadband OptimizedTM Protection TwinChip™ Series - DO-15 RoHS Pb e3 Description TwinChip™ Series DO-15 are very low capacitance SIDACtor® thyristors are designed to protect broadband CPE equipment, such as VoIP and xDSL modems from damaging overvoltage transients. The series provides a through-hole solution that enables equipment to comply with global regulatory standards while limiting the impact to broadband signals. Features & Benefits • Differential protection Agency Approvals surge events within limit. • Low insertion loss Agency • Fails short circuit when surged in excess of ratings • Low capitance Agency File Number • RoHS Compliant • GDT compatible axial footprint E133083 • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01) • Low voltage overshoot Pinout Designation • Does not degrade surge capability after multiple NOT APPLICABLE Applicable Global Standards Schematic Symbol • TIA-968-A • IEC 61000-4-5 2nd edition • TIA-968-B • YD/T 1082 • ITU K.20/21/45 Basic Level • YD/T 993 • YD/T 950 • GR 1089 Intra-building Electrical Characteristics Part Number P2602GBLRP P3002GBLRP P3502GBLRP P4502GBLRP* Marking VT VDRM@ IDRM=5µA VS@ 100V/µs IH IS IT V min V max mA min mA max A max V max pF min pF max 220 280 320 400 300 360 400 530 150 150 150 150 800 800 800 800 2.2 2.2 2.2 2.2 8 8 8 8 15 10 10 25 25 20 20 45 P262B P30B P352B P452B @ IT = 2.2 Amps @1MHz @ 2V bias Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are bi-directional. Additional Information Datasheet Resources Samples © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor ® Protection Thyristors Broadband OptimizedTM Protection Surge Ratings ITSM IPP Series 10/160 1 10/160 2 10/1000 1 10/1000 2 5/310 1 10/700 2 50 / 60 Hz A min A min A typ A min 100 80 150 25 B Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C 1 Current waveform in µs 2 Voltage waveform in µs Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 120 °C/W DO-15 V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 td tr 0 t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 2.0 12 1.8 10 IH 8 6 25 °C 4 IH (TC = 25ºC) 14 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 2 0 -4 -6 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 Case Temperature (TC) - ºC 160 SIDACtor ® Protection Thyristors Broadband OptimizedTM Protection Soldering Parameters Pb-Free assembly (see Figure 1) - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60-180 secs 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60-150 seconds Peak Temperature (TP) 260(+0/-5)°C Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max Do not exceed 260°C Physical Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material TP 150°C Average ramp up rate (Liquidus Temp (TL) to peak) Reflow Figure 1 UL Recognized epoxy meeting flammability classification V-0 tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/ JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C peak). JEDEC-J-STD-020, Level 1 © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor ® Protection Thyristors Broadband OptimizedTM Protection Dimensions - DO-15 (Revised 11/14/07) Dimensions — DO-15 B L Inches Dimension D G L Part Numbering Millimeters min max min max B 0.028 0.034 0.711 0.864 D 0.12 0.14 3.048 3.556 G 0.235 0.27 5.969 6.858 L 1 25.4 Part Marking P xxx 2 G x L RP Part Marking Code MEDIAN VOLTAGE RoHS COMPLIANT CONSTRUCTION VARIABLE IPP RATING (Refer to Electrical Characteristics Table) XXXXX REEL PACK Pxxxx TYPE P = SIDACtor Date Code PACKAGE TYPE Packing Options Package Type Description Quantity Added Suffix Industry Standard G DO-15 Axial Tape & Reel 5000 RP EIA-RS-296-D Tape and Reel Specification — DO-15 Spacing off center, either side 0.039 (1.0) A B 2.55 (64.8) TYP C D E Dimensions are in inches (and millimeters). Symbols Description inch mm A Component Spacing (lead to lead) 0.200 ± 0.020” 5.08 ± 0.508 B C D E F G Inner Tape Pitch Tape Width Max. Off Alignment Reel Dimension Max. Hub Recess Max. Abor Hole 2.062 ± 0.059” 0.250” 0.048” 13” 3” 0.68” 52.37 ± 1.498 6.35 1.219 330.2 76.19 17.27 3.15 (80.0) TYP recess depth max 0.75” G F Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17