P6002ACMCL

SIDACtor® Datasheet Pxxx2ACMC Series Two-Chip MicroCapacitance SIDACtor ® - Modified TO-220 RoHS e3 Description This Pxxx2ACMC Series offered in a modified TO-220 package are low capacitance SIDACtor components designed to protect various types of Broadband equipment from damaging overvoltage transients. The series provides a robust peak surge current capability that enables equipment to comply with various global regulatory standards while limiting the impact to broadband signals. Features and Benefits ■ Low voltage overshoot ■ Low on-state voltage ■ Does not degrade surge capability after multiple surge events within limit. Additional Information ■ Fails short circuit when surged in excess of ratings ■ Robust Modified TO-220 Package ■ Custom lead forms available Resources Accessories ■ Halogen-free and RoHS compliant ■ Recognized to UL 497B as an Isolated Loop Circuit Protector ■ 40% lower capacitance than our Baseband Protectors, for applications that demand greater signal integrity Samples Applicable Global Standards Agency Approvals Agency ■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Agency File Number E133083 ■ TIA-968-A ■ GR 1089 Intra-building ■ TIA-968-B ■ IEC 61000-4-5 2nd Edition ■ ITU K.20/21 Enhanced Level ■ YD/T 1082 ■ ITU K.20/21 Basic Level ■ YD/T 993 ■ GR 1089 Inter-building ■ YD/T 950 Pinout Designation Schematic Symbol 1 (T) 3 PIN 1 PIN 2 PIN 3 2 (G) (R) Electrical Characteristics Part Number Marking VDRM @lDRM=5µA VS @100V/µs VDRM @lDRM=5µA VS @100V/µs IH V min V max V min V max mA min Pins 1-2, 3-2 P0602ACMCLxx P0602ACMC P1402ACMCLxx P1402ACMC P1602ACMCLxx P1602ACMC P2202ACMCLxx P2202ACMC P2702ACMCLxx P2702ACMC P3002ACMCLxx P3002ACMC P3602ACMCLxx P3602ACMC P4202ACMCLxx P4202ACMC 25 58 65 90 120 140 170 190 40 77 95 130 160 180 220 250 Pins 1-3 50 116 130 180 240 280 340 380 Pins 1-2, 3-2 80 154 190 260 320 360 440 500 50 150 150 150 150 150 150 150 IS IT mA max A max 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @ IT=2.2 Amps Capacitance V min 4 4 4 4 4 4 4 4 See Capacitance Values Table Table continues on next page. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 SIDACtor® Datasheet Pxxx2ACMC Series Two-Chip MicroCapacitance SIDACtor ® - Modified TO-220 Electrical Characteristics (continued) Part Number Marking VDRM @lDRM=5µA VS @100V/µs VDRM @lDRM=5µA VS @100V/µs V min V max V min V max Pins 1-2, 3-2 IS IH mA min Pins 1-3 Pins 1-2, 3-2 IT VT @ IT=2.2 Amps mA max A max Capacitance V min P4802ACMCLxx P4802ACMC 220 300 440 600 150 800 2.2 4 P6002ACMCLxx P6002ACMC 275 350 550 700 150 800 2.2 4 See Capacitance Values Table Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are bi-directional (unless otherwise noted). - XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form, Bulk Pack. Special order item -- contact factory.) Capacitance Values pF Pin 1-2 / 3-2 Tip-Ground, Ring-Ground Part Number pF Pin 1-3 Tip-Ring MIN MAX MIN MAX P0602ACMCLxx 25 45 10 25 P1402ACMCLxx 40 60 20 35 P1602ACMCLxx 35 55 20 35 P2202ACMCLxx 45 70 25 40 P2702ACMCLxx 40 60 20 35 P3002ACMCLxx 35 55 20 35 P3602ACMCLxx 35 50 15 30 P4202ACMCLxx 30 50 15 30 P4802ACMCLxx 30 45 15 30 P6002ACMCLxx 30 45 15 25 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Surge Ratings Series IPP C ITSM 50/60 Hz di/dt A min A min A/µs Max 200 30 500 0.2/310 0.5/700 2 2/10 2/10 2 8/20 1.2/50 2 10/160 10/160 2 10/560 1 10/560 2 5/320 1 9/720 2 10/360 1 10/360 2 10/1000 1 10/1000 2 5/310 1 10/700 2 A min A min A min A min A min A min A min A min 50 500 400 200 150 200 175 100 1 1 1 1 Notes: 1 Current waveform in µs 2 Voltage waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 SIDACtor® Datasheet Pxxx2ACMC Series Two-Chip MicroCapacitance SIDACtor ® - Modified TO-220 Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 50 °C/W Modified TO-220 PIN 1 PIN 2 PIN 3 V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 °C 4 2 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 -40 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C 25°C 1.2 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 SIDACtor® Datasheet Pxxx2ACMC Series Two-Chip MicroCapacitance SIDACtor ® - Modified TO-220 Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Figure 1 TP TL T S(max) Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material Critical Zone TL to TP tL Ramp-down Preheat T S(min) tS 25 time to peak temperature (t 25ºC to peak) Physical Specifications Lead Material tP Ramp-up Temperature Reflow Condition Time Environmental Specifications UL Recognized compound meeting flammability rating V-0 4 High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Unbiased Highly Accelerated Stress Test +130°C, 85%RH, 2atm, 96 hrs. JESD22-A-118 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 SIDACtor® Datasheet Pxxx2ACMC Series Two-Chip MicroCapacitance SIDACtor ® - Modified TO-220 Part Marking Part Numbering P xxx 2 A x MC L xx TYPE P = SIDACtor XXXXXXXXX PACKING OPTIONS Blank, RP or 60 -- for Type 60 orders, contact factory MEDIAN VOLTAGE xxxxx IPP RATING Dimensions - Modified TO-220 A Millimeters Min Max Min A 0.400 0.410 10.16 10.42 Temperature Measurement Point D 0.360 0.375 9.14 9.53 F 0.110 0.130 2.80 3.30 PIN 3 PIN 2 PIN 1 G 0.540 0.575 13.71 14.61 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.90 M 0.070 0.085 1.78 2.16 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.290 0.310 7.37 7.87 P L K Tape and Reel Specification — Modified TO-220 Inches O D H Date Code MC Series PACKAGE TYPE G (Refer to Electrical Characteristics Table) RoHS COMPLIANT CONSTRUCTION VARIABLE F Part Marking Code M N J The modified TO-220 package is designed to meet mechanical standards as set forth in JEDEC publication number 95. 0.240 (6.10) Max 0.019 (0.5) 1.626 (41.15) 0.720 (18.29) 0.750 ± 0.010 (19.05 ± 0.25) 0.360 (9.14) 0.500 (12.7) 0.100 (2.54) 0.100 (2.54) 14.173 (360.0) Dimensions are in inches (and millimeters). Direction of Feed 1.968 (50.0) Packing Options Package Type A Description Quantity Added Suffix Industry Standard Modified TO-220, Tape and Reel Pack 700 RP EIA-468-B Modified TO-220, Bulk Pack 500 N/A N/A 500 60 (special order item, contact factory for details) N/A Modified TO-220, Type 60 Lead Form Bulk Pack Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. “Littelfuse” includes Littelfuse, Inc., and all of its affiliate entities. http://www.littelfuse.com/disclaimer-electronics. 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21