P6KE180A-TB

Silicon Avalanche Diodes 600 Watt Axial Leaded Transient Voltage Suppressors RoHS P6KE Series ® The P6KE Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and other transient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. FEATURES • RoHS Compliant • 6.8 to 550 Volts • Uni-directional and Bi-directional • Glass passivated chip junction in DO-15 Package • 600W surge capability at 10/1000µs wave form • Excellent clamping capability MAXIMUM RATINGS AND CHARACTERISTICS @25˚C AMBIENT TEMPERATURE (unless otherwise noted) • Low zener impedance • Fast response time: typically less than 1.0ps from 0 Volts to BV min. RATING • Typical IR less than 1µA above 10V • High temperature soldering guaranteed: 265˚C/10seconds/.375", (9.5mm) lead length, 5lbs.,(2.3kg) tension Peak Pulse Power Dissipation at TA=25˚C, TP=1ms(Note 1) Steady State Power Dissipation at TL=75˚C, Lead lengths .375", Agency Approvals: Recognized under the Components (9.5mm) (Note 2) Program of Underwriters Laboratories. Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load, (JEDEC Method) (Note 3) Agency File Number: E128662 Operating junction and Storage Temperature Range SYMBOL VALUE UNIT PPPM Min 600 Watts PM(AV) 5 Watts IPSM 100 Amps Tj, TSTG -55 to +175 °C Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA= 25˚C per Fig.2 3. 8.3 ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. ORDERING INFORMATION P6KE Voltage CA Bi-Directional 5% Voltage Tolerance Packaging Option Mechanical Specifications: Weight: Case: Mounting Position: Polarity: Terminal: B = Bulk (1000 pcs) T = Tape and reeled (4000 pcs) 295 w w w. l i t t e l f u s e . c o m 0.015 ounce, 0.4 grams JEDEC DO-15 Molded Plastic Any Color band denotes cathode except Bipolar Axial leads, solderable per MIL-STD-750, Method 2026 Silicon Avalanche Diodes 600 Watt Axial Leaded Transient Voltage Suppressors RoHS P6KE Series ® ELECTRICAL SPECIFICATION @ Tamb 25°C Uni-Polar P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A P6KE10A P6KE11A P6KE12A P6KE13A P6KE15A P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE110A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE350A P6KE400A P6KE440A P6KE480A P6KE510A P6KE530A P6KE540A P6KE550A Bi-Polar P6KE6.8CA P6KE7.5CA P6KE8.2CA P6KE9.1CA P6KE10CA P6KE11CA P6KE12CA P6KE13CA P6KE15CA P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA P6KE110CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE350CA P6KE400CA P6KE440CA P6KE480CA P6KE510CA P6KE530CA P6KE540CA P6KE550CA 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 450.00 459.00 467.00 Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) MIN MAX 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @ IPP (Volts) Maximum Peak Pulse Current IPP (A) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 58.1 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.8 0.8 0.8 6 Maximum Reverse Leakage IR @ VR (µA) SILICON DIODE ARRAYS Part Numbers Reverse Stand off Voltage VR (Volts) 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% w w w. l i t t e l f u s e . c o m 296 Silicon Avalanche Diodes 600 Watt Axial Leaded Transient Voltage Suppressors P6KE Series Non-repetitive Pulse Waveform shown in Fig 3. TA=25˚C 10 1 0.1 0.1µs 1.0µs 100µs 10µs td- Pulse Width (sec.) 1.0ms 10ms tr=10µsec 75 50 25 0 25 0 CJ-Junction Capacitance (pF) Half Value IPPM 2 50 10/1000µsec. Waveform as defined by R.E.A 0 0 td 1.0 2.0 3.0 t-Time (ms) 3.75 2.50 1.25 0 0 1.6x1.6x.040 (40x40x1mm) Copper Heat Sinks 25 50 75 100 125 150 175 200 TL- Lead Temperature (˚C) Fig. 5 Steady State Power Derating Curve 10 1 Measured at Devices Stand-off Voltage, VWM TA=25˚C 0.1 0.01 0.001 0 0.2 4 0 1 Vbr- Breakdown Voltage (V) 1.2 Fig. 7- Typical Reverse Leakage Characteristics 297 T =25˚C Measured at Zero Bias Vsig=50mVp-p 1000 100 10 Measured at Stand-Off Voltage, VMM 1.0 200 10 100 200 100 VWM-Reverse Stand-Off Voltage (V) 8.3 Single Half Sine-Wave (JEDEC Method) Undirectional Only Uni-Directional Only 100 50 10 1 5 10 50 100 Number of Cycles at 60Hz Fig. 6- Max. Non-Repetitive Forward Surge Current Transient Thermal Impedance (˚C/W) 1000 100 100 125 150 175 200 Fig. 4- Typical Junction Capacitance Uni-Directional 60HZ Resistive or Inductive Load L=0.375(9.5mm) Lead Lengths 75 TA- Ambient Temperature (˚C) J 6000 f=1MHZ 4.0 Fig. 3 Pulse Waveform 5.00 50 Fig. 2 Pulse Derating Curve TJ=25˚C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 PM(AV),Steady State Power Dissipation (W) 100 Fig. 1 Peak Pulse Power Rating 150 IO- Instantaneous Reverse Leakage Current(µA) Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage, % 100 ® IPSM-Peak Forward Surge Current (A) IPPM- Peak Pulse Current, % I RSM PPPM- Peak Pulse Power (kW) RoHS 100 10 1 0.1 0 0.2 0.4 0.6 0.8 tp- Pulse Duration (sec) 1 1.2 Fig. 8- Typ. Transient Thermal Impedance w w w. l i t t e l f u s e . c o m Silicon Avalanche Diodes 600 Watt Axial Leaded Transient Voltage Suppressors RoHS P6KE Series ® Outline Dimensions SILICON DIODE ARRAYS 6 DO-204AC (DO-15) 1.0 (25.4) MIN. 0.140 (3.6) 0.104 (2.6) DIA. 0.300 (7.6) 0.230 (5.8) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) w w w. l i t t e l f u s e . c o m 298