QJ8006NH4RP

Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs RoHS Description This 6 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type components guarantee gate control in Quadrants I & IV as needed for digital control circuitry. Alternistor type components only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Standard type devices normally operate in Quadrants I & III triggered from AC line Features & Benefits Additional Information Resources Accessories ■ 150°C maximum junction temperature ■ No contacts to wear out from reaction of switching events ■ Voltage capability up to 800V ■ Restricted (or limited) RFI generation, depending on activation point of sine wave ■ Surge capability up to 80A at 60Hz half cycle Samples ■ Solid-state switching eliminates arcing or contact bounce that create voltage transients Agency Approvals & Environmental ■ Requires only a short gate activation pulse in each halfcycle ■ Halogen free and RoHS compliant Enironmental Approvals RoHS Note: UL recognition agency file number E71639 (L package only) Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in applications with high inductive loads requiring the highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Symbol Value Unit A IT(RMS) 6 VDRM/VRRM 400 to 800 V IGT (Q1) 10 to 50 mA Schematic Symbol MT2 MT1 G 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Absolute Maximum Ratings — Sensitive Triac (4 Quadrants) Symbol Parameter Value VDSM/VRSM Peak non-repetitive blocking voltage IT(RMS) RMS on-state current (full sine wave) LJxx06Vy/LJxx06Dy ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t I2t Value for fusing di/dt Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time f = 60 Hz IGTM Peak gate trigger current tp=20μs PG(AV) PW=100 μs Unit 700 V TC = 130°C 6 A f = 50 Hz t = 20 ms 60 f = 60 Hz t = 16.7 ms 72 tp = 8.3 ms 21.5 A2s 70 A/μs TJ = 150°C Average gate power dissipation A TJ = 150°C 4 A TJ = 150°C 0.4 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 150 °C Note: xx=voltage/10, y = sensitivity Absolute Maximum Ratings — Alternistor Triac (3 Quadrants) Symbol VDSM/VRSM IT(RMS) Parameter Peak non-repetitive blocking voltage PW=100 μs 700 V 800V 1000 V 6 A QJxx06LHy TC = 125°C f = 50 Hz f = 60 Hz t = 20 ms t = 16.7 ms I 2t I2t Value for fusing tp = 8.3 ms di/dt Critical rate of rise of on-state current f = 60 Hz IGTM Peak gate trigger current tp=20μs PG(AV) 600V TC = 130°C QJxx06RHy/QJxx06NHy ITSM Unit QJxx06VHy/QJxx06DHy RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) Value TC = 140°C QJxx06VHy/QJxx06DHy 60 QJxx06LHy/QJxx06RHy/QJxx06NHy 65 QJxx06VHy/QJxx06DHy 72 QJxx06LHy/QJxx06RHy/QJxx06NHy 80 QJxx06VHy/QJxx06DHy 21.5 QJxx06LHy/QJxx06RHy/QJxx06NHy 26.6 TJ = 150°C 70 Average gate power dissipation A A 2s A/μs TJ = 150°C 4 A TJ = 150°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 150 °C Note: xx=voltage/10, x = sensitivity Absolute Maximum Ratings — Standart Triac (4 Quadrants) Symbol VDSM/VRSM Parameter Peak non-repetitive blocking voltage PW=100 μs 800V QJxx06Ly TC = 125°C QJxx06Ry/QJxx06Ny TC = 140°C IT(RMS) RMS on-state current (full sine wave) ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t I2t Value for fusing di/dt Critical rate of rise of on-state current f = 60 Hz IGTM Peak gate trigger current tp=20μs Value Unit 1000 V 6 A f = 50 Hz t = 20 ms 100 f = 60 Hz t = 16.7 ms 120 tp = 8.3 ms A 26.5 A 2s TJ = 150°C 70 A/μs TJ = 150°C 4 A TJ = 150°C 0.5 W PG(AV) Average gate power dissipation Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 150 °C Note: xx=voltage/10, y = sensitivity 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants) Symbol Test Conditions IGT VD = 12V RL = 60 Ω VGT VGD dv/dt Unit LJxx06x8 10 20 I – II – III IV MAX. ALL MAX. 1.2 MIN. 0.15 V MAX. 25 mA VD = VDRM RL = 3.3 kΩ TJ = 150°C IH Value Quadrant ALL IT = 100mA 400V VD = VDRM Gate Open TJ = 150°C V 80 TYP. 600V mA V/μs 50 (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 150°C TYP. 2 V/μs tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 12 μs Note: xx=voltage/10, x = package Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants) Symbol Test Conditions IGT VD = 12V RL = 60 Ω VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 150°C IH dv/dt QJxx06xH2 QJxx06xH3 QJxx06xH4 10 20 35 Unit I – II – III MAX. I – II – III MAX. 1.3 V I – II – III MIN. 0.15 V IT = 100mA VD = VDRM Gate Open TJ = 150°C Value Quadrant MAX. QJxx06xHy MIN. 25 30 35 400V 150 250 350 600V 100 200 250 800V - - 450 mA mA V/μs (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 150°C MIN. 15 18 20 V/μs tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 10 10 10 μs Note: xx=voltage/10, x = package Electrical Characteristics (TJ=25°C,unless otherwise specified) - Standard Triac Symbol Test Conditions VD = 12V RL = 60 Ω I – II – III IV ALL VD = VDRM RL = 3.3 kΩ TJ = 150°C ALL IGT VGT VGD IH dv/dt QJxx06xH2 800V Unit MAX. 50 50 1.3 MIN. 0.2 V MAX. 50 mA MIN. 1000 V/μs MAX. Initial IT = 100mA VD = VDRM Gate Open TJ = 150°C Value Quadrant mA V (dv/dt)c (di/dt)c = 3.2 A/ms TJ = 150°C MIN. 4 V/μs tgt IG = 2 x IGT PW = 15µs IT = 8.5 A(pk) TYP. 3 μs Note: xx=voltage/10, x = package 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Static Characteristics Symbol Test Conditions VTM ITM = 8.4 A tp = 380 µs LJxx06xy IDRM / IRRM VDRM = VRRM QJxx06xHy MAX. Unit 1.40 V μA TJ = 25°C 400 - 600V 10 TJ = 125°C 400 - 600V 0.5 TJ = 150°C 400 - 600V 3 TJ = 25°C 400 - 800V 10 TJ = 125°C 400 - 800V TJ = 150°C 400 - 800V 3 800V 0.5 MAX. mA μA 0.5 TJ = 25°C QJxx06x5 Value mA 10 TJ = 125°C TJ = 150°C μA mA 3 Note: xx=voltage/10, x = package, y = sensitivity Thermal Resistances Symbol Parameter RƟ(JC) RƟ(J-A) Value Junction to case (AC) LJ/QJxx06Vyy LJ/QJxx06Dyy QJxx06R5/QJxx06N5 2.3 Junction to ambient QJxx06L5 LJ/QJxx06Vyy LJ/QJxx06Dyy QJxx06R5 QJxx06L5 90 Unit 1.3 °C/W 0.9 70 °C/W 45 Note: xx=voltage/10, y = sensitivity Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 1.8 MT2 POSITIVE (Positive Half Cycle) 1.6 (+) I GT GATE MT1 I GT REF (-) MT1 REF QII QI QIII QIV MT2 IGT I GT GATE MT2 I GT GATE (+) + IGT IGT (TJ = 25°C) (-) + Ratio of MT2 MT2 1.4 1.2 1.0 0.8 0.6 0.4 I GT GATE 0.2 MT1 REF - MT2 NEGATIVE (Negative Half Cycle) MT1 0 REF -40 -15 10 35 60 85 110 135 150 Junction Temperature (TJ)- ºC NOTE: Alternistors will not operate in QIV Note: Alternistors will not operate in QIV 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 1.6 VGT 0.8 VGT (TJ = 25°C) 1.2 Ratio of IH 1.4 Ratio of IH (TJ = 25°C) 1.6 1.2 1.0 0.8 0.6 0.4 0.4 0.2 0 -40 -15 10 35 60 85 110 135 0 150 -40 -15 Junction Temperature (TJ)- ºC 60 85 110 135 150 Figure 6: Maximum Allowable Case Temperature vs. On-State Current 6 160 CURRENT WAVE FORM: Sinusoidal 5 35 Junction Temperature (TJ)- ºC Figure 5: Power Dissipation (Typical) vs. RMS On-State Current QJxx06RHy/QJxx06NHy QJxx06RyQJxx06Ny LJxx06Vy/LJxx06Dy QJxx06VHy/QJxx06DHy 150 LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV)) - Watts 10 4 3 2 1 140 130 QJxx06LHy/QJxx06Ly 120 110 CURRENT WAVE FORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on Dimensional Drawing 100 90 80 0 0 0 1 2 3 4 5 2 4 6 8 6 RMS On-State Current (IT(RMS)) - Amps RMS On-State Current (IT(RMS)) - Amps Figure 7: On-State Current vs. On-State Voltage (Typical) 20 Positive or Instantaneous On-State Current (IT) - Amps 18 16 14 12 10 8 6 4 2 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Positive or Instantaneous On-State Voltage (VT) - Volts 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Figure 8: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration- Full Cycles Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C tP TP Temperature Reflow Condition tL TS(max) Preheat TS(min) 25 6 Ramp-up TL Ramp-do Ramp-down tS time to peak temperature Time © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Physical Specifications Environmental Specifications Terminal Finish 100% Matte Tin-plated Body Material UL Recognized compound meeting flammability rating V-0. AC Blocking (VDRM) MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours Terminal Material Copper Alloy Temperature Cycling MIL-STD-750, M-1051, 1000 cycles; -55°C to +150°C; 15-min dwell-time Temperature/Humidity EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Test Design Considerations Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Specifications and Conditions Dimensions — TO-251AA (V-Package) — V-PAK Through Hole TC MEASURING POINT MT2 E H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C MT1 MT2 GATE F L G I 7 Inches Millimeters Min Typ Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Dimensions — TO-252AA (D-Package) — D-PAK Surface mount E D MT2 MT2 E A A B MT2 C A MT2 G AREA : 0.040 IN2 MT2 C5.28 MT1 GATE F .208 MT2 6.71 .264 L O G O 4.60 .181 M N J J H 1.80 H .071 4.60 .181 M N L 1.60 .063 K M 3 .118 H J Millimeters Min Typ Max Min Typ Max 0.037 0.040 0.043 0.94 1.01 1.09 B 6.71 0.235 .264 .264 0.243 0.245 5.97 6.16 6.22 0.108 0.113 2.69 2.74 2.87 6.71 0.106 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F .071 0.027 0.031 0.033 0.69 0.80 0.84 G4.60 0.087 .071 0.090 0.093 2.21 2.28 2.36 H.181 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 0.58 1.80 1.80 J 0.018 0.020 0.023 0.46 0.51 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 0.69 N 0.021 0.026 0.027 0.53 0.67 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 1.80 .071 N REA : 0.040 IN2 T2 3 .118 K 3 .118 6.71 .264 5.34 I .210 6.71 .264 1.60 .063 K AREA : 0.040 IN2 MT2 3 .118 L O I P Q AREA : 0.040 IN2 MT2 G 5.34 I.210 F 1.60 .063 1.60 .063 Inches A C 6.71 .264 GATE F GATE MT2 MT1 B P Q C 5.28 P .208Q MT1 TC MEASURING POINT 5.34 .210 5.34 .210 B E D 6.71 6.71 .264 Dimension .264 5.28 .208 TC MEASURING 5.28POINT D POINT TC MEASURING .208 4.60 .181 Dimensions — TO-220AB(L-Package) — Isolated Mounting Tab K J H TC MEASURING POINT O A Ø E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A B C D E F G H J K L M N O P R B C 13.36 .526 D 7.01 .276 F R G L H K N J MT1 MT2 GATE M Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). 8 Inches Millimeters Min Max Min Max 0.380 0.105 0.230 0.590 0.142 0.110 0.540 0.025 0.195 0.095 0.060 0.085 0.018 0.178 0.045 0.038 0.420 0.115 0.250 0.620 0.147 0.130 0.575 0.035 0.205 0.105 0.075 0.095 0.024 0.188 0.060 0.048 9.65 2.67 5.84 14.99 3.61 2.79 13.72 0.64 4.95 2.41 1.52 2.16 0.46 4.52 1.14 0.97 10.67 2.92 6.35 15.75 3.73 3.30 14.61 0.89 5.21 2.67 1.91 2.41 0.61 4.78 1.52 1.22 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Dimensions — TO-220 AB (R- Package) — Non-isolated Mounting Tab TC MEASURING POINT A Ø E AREA (REF.) 0.17 IN2 O Dimension 8.13 .320 P MT2 A B C 13.36 .526 D 7.01 .276 Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 2.92 B 0.105 0.115 2.67 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 L J 0.195 0.205 4.95 5.21 H K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G N K J MT1 M Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). MT2 GATE O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions — TO-263 AB (N- Package) — D2Pak Surface Mount TC MEASURING POINT B Dimension AREA: 0.11 IN2 C V MT2 7.01 .276 A 8.41 .331 S W U G J K GATE MT1 H D F 11.68 .460 8.13 .320 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 10.67 E B 0.380 0.420 9.65 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 15.88 S 0.590 0.625 14.99 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 3.81 .150 2.03 .080 6.60 .260 9 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Product Selector Part Number LJxx06D8 Voltage Gate Sensitivity Quadrants 400V 600V 800V I - II - III IV x x - 10 20 Type Package Sensitive Triac TO-252 D-PAK LJxx06V8 x x - 10 20 Sensitive Triac TO-251 V-PAK QJxx06DH2 x x - 10 - Alternistor Triac TO-252 D-PAK QJxx06VH2 x x - 10 - Alternistor Triac TO-251 V-PAK QJxx06DH3 x x - 20 - Alternistor Triac TO-252 D-PAK QJxx06VH3 x x - 20 - Alternistor Triac TO-251 V-PAK QJxx06DH4 x x - 35 - Alternistor Triac TO-252 D-PAK QJxx06VH4 x x - 35 - Alternistor Triac TO-251 V-PAK QJxx06LH4 - - x 35 - Alternistor Triac TO-220L QJxx06RH4 - - x 35 - Alternistor Triac TO-220R QJxx06NH4 - - x 35 - Alternistor Triac TO-220N QJxx06L5 - - x 50 50 Standard Triac TO-220L QJxx06R5 - - x 50 50 Standard Triac TO-220R QJxx06N5 - - x 50 50 Standard Triac TO-220N Note: xx = voltage/10 Packing Options Part Number Marking Weight Packing Mode Base Quantity LJxx06D8TP LJxx06D8 0.3g Tube Pack 750(75 per tube) LJxx06D8RP LJxx06D8 0.3g Embossed Carrier 2500 QJxx06DH2TP QJxx06DH2 0.3g Tube Pack 750(75 per tube) QJxx06DH2RP QJxx06DH2 0.3g Embossed Carrier 2500 QJxx06VH2TP QJxx06VH2 0.3g Tube Pack 750(75 per tube) LJxx06V8TP LJxx06V8 0.4g Tube Pack 750(75 per tube) 750(75 per tube) QJxx06DH3TP QJxx06DH3 0.3g Tube Pack QJxx06DH3RP QJxx06DH3 0.3g Embossed Carrier 2500 QJxx06VH3TP QJxx06VH3 0.4g Tube Pack 750(75 per tube) QJxx06DH4TP QJxx06DH4 0.3g Tube Pack 750(75 per tube) QJxx06DH4RP QJxx06DH4 0.3g Embossed Carrier 2500 QJxx06VH4TP QJxx06VH4 0.4g Tube Pack 750(75 per tube) QJxx06LH4TP QJxx06LH4 2.2g Tube Pack 1000(50per tube) QJxx06RH4TP QJxx06RH4 2.2g Tube Pack 1000(50per tube) 1000(50per tube) QJxx06NH4TP QJxx06NH4 1.6g Tube Pack QJxx06NH4RP QJxx06NH4 1.6g Embossed Carrier 500 QJxx06L5TP QJxx06L5 2.2g Tube Pack 1000(50per tube) QJxx06R5TP QJxx06R5 2.2g Tube Pack 1000(50per tube) QJxx06N5TP QJxx06N5 1.6g Tube Pack 1000(50per tube) QJxx06N5RP QJxx06N5 1.6g Embossed Carrier 500 Note: xx = voltage/10 10 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21 Thyristors Datasheet LJxx06xx & QJxx06xHx & QJxx06xx Series 6 Amp High Temp Sensitive, Standard & Alternistor (High Communication) Triacs Part Numbering System QJ 60 06 V 8 Y:Year Code M: Month Code L: Location Code DD: Calendar Code XXXXXX PACKAGE TYPE V : TO-251 (VPAK) D : TO-252 (DPAK) L : TO-220 Isolated R : TO-220 Non Isolated N : TO-263 D2PAK DC DC XX XXXXXX ® Date Code Marking TO-252 Embossed Carrier Reel Pack (RP) Specifications MT2 Meets all EIA-481-2 Standards Direction of Feed * Cover tape 0.512 (13.0) Arbor 0.315 (8.0) HoleSpecifications Dia. TO-263 Embossed Carrier Reel Pack (RP) Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) MT1 XXXXXX DC * 0.059 DIA (1.5) XX 0.524 (13.3) XX 0.63 (16.0) 0.64 (16.3) DC Gate XXXXXX 0.157 (4.0) Dimensions are in inches (and millimeters). XXXXXX 12.99 (330.0) DC 0.315 (8.0) XX 0.512 (13.0) Arbor Hole Dia. YMLDD XXXXXX * Cover tape DC * XX 0.524 (13.3) Gate XXXXXX 0.63 (16.0) 0.157 (4.0) XX VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V CURRENT 06: 6A LJ6006V8 SENSITIVITY & TYPE Sensitive Triac: 8: 10 mA (QI, II, III) 20 mA (QIV) Alternistor Triac: H2: 10mA(QI,II,III) H3: 20mA(QI,II,III) H4: 35mA(QI,II,III) 0.059 DIA Standard Triac (1.5) 5: MT1 50mA(QI,II,III,IV) XXXXXX COMPONENT TYPE LJ : HT Sensitive Triac QJ : HT Triac or Alternistor Part Marking System MT2 12.99 (330.0) Dimensions are in inches (and millimeters). 0.64 (16.3) Gate MT1 Direction of Feed 0.945 (24.0) 0.827 (21.0) * * Cover tape MT2 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 11 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/04/21