QJ8008N5TP

Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type components guarantee gate control in Quadrants I & IV as needed for digital control circuitry. Alternistor type components only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Standard type devices normally operate in Quadrants I & III triggered from AC line Additional Information Features & Benefits ■ 150°C maximum junction temperature ■ Voltage capability up to 800V Resources Accessories ■ Surge capability up to 100A at 60Hz half cycle Samples ■ Solid-state switching eliminates arcing or contact bounce that create voltage transients Agency Approvals and Environmental ■ Restricted (or limited) RFI generation, depending on activation point of sine wave ■ Requires only a short gate activation pulse in each halfcycle ■ Halogen free and RoHS compliant ■ No contacts to wear out from reaction of switching events Environmental Approvals RoHS Note: UL recognition agency file number E71639 (L package only) Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Main Features Symbol Value Unit IT(RMS) 8 A VDRM /VRRM 400 or 600 or 800 V IGT (Q1) 10 to 50 mA Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in applications with high inductive loads requiring the highest commutation performance. Schematic Symbol MT2 MT1 G 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Absolute Maximum Ratings — Sensitive Triac (4 Quadrants) Symbol Parameter Value Unit VDSM/VRSM Peak non-repetitive blocking voltage PW=100 μs 600V 700 V IT(RMS) RMS on-state current (full sine wave) LJxx08Vy/LJxx08Dy TC = 130°C 8 A ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms 70 f = 60 Hz t = 16.7 ms 84 I2t I2t Value for fusing di/dt Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time f = 60 Hz IGTM Peak gate trigger current tp=20μs tp = 8.3 ms Average gate power dissipation A 29 A2s TJ = 150°C 150 A/μs TJ = 150°C 4 A 0.3 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 150 °C PG(AV) TJ = 150°C Note: xx=voltage/10, y = sensitivity Absolute Maximum Ratings — Alternistor (3 Quadrants) Symbol Parameter VDSM/VRSM Peak non-repetitive blocking vlotage PW=100µs Non repetitive surge peak on-state current (full cycle,TJ initial= 25 oC) ITSM Unit 600V 700 V 800V 1000 V 8 A QJxx08VHy/QJxx08DHy TC = 130 C QJxx08LHy TC = 125oC QJxx08RHy/QJxx08NHy TC = 135oC RMS on-state current (full sine wave) IT(RMS) Value f=50Hz f=60Hz t=20ms t=16.7ms o QJxx08VHy/QJxx08DHy 70 QJxx08LHy/QJxx08RHy/QJxx08NHy 83 QJxx08VHy/QJxx08DHy 84 QJxx08LHy/QJxx08RHy/QJxx08NHy 100 QJxx08VHy/QJxx08DHy 29 QJxx08LHy/QJxx08RHy/QJxx08NHy 26.5 A I2t I2t Value for fusing tp=8.3ms di/dt Critical rate of rise of on-state current f=60Hz Tj=150oC 70 A/us IGTM Peak gate trigger current tp=20µs Tj=150oC 4 A/us Tj=150oC 0.5 W A2s PG(AV) Average gate power dissipation TSTG Storage temperature range -40 to 150 o C TJ Operating juction temperature range -40 to 150 o C Note: xx=voltage/10, y = sensitivity Absolute Maximum Ratings - Standard Triac (4 Quadrants) Symbol VDSM/VRSM Parameter Peak non-repetitive blocking vlotage PW=100µs 800V QJxx08L5 TC = 125oC QJxx08R5/QJxx08N5 TC = 135oC Value Unit 1000 V 8 A A IT(RMS) RMS on-state current (full sine wave) ITSM Non repetitive surge peak on-state current (full cycle,TJ initial= 25oC) I2t I2t Value for fusing tp=8.3ms QJxx08x5 26.5 di/dt Critical rate of rise of on-state current f=60Hz Tj=150 C 70 A/us IGTM Peak gate trigger current tp=20µs Tj=150oC 4 A/us Tj=150oC 0.5 W f=50Hz t=20ms 83 f=60Hz t=16.7ms 100 o A2s PG(AV) Average gate power dissipation TSTG Storage temperature range -40 to 150 o TJ Operating juction temperature range -40 to 150 o C C Note: xx=voltage/10, x = package 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants) Symbol Test Conditions IGT VGT VGD IH Quadrant LJxx08x8 VD = 12V RL = 60 Ω MAX. 10 20 1.3 VD = VDRM RL = 3.3 kΩ TJ = 150°C ALL MIN. 0.15 V MAX. 25 mA MAX. Initial IT = 100mA dv/dt Unit I – II – III IV ALL 400V VD = VDRM Gate Open TJ = 150°C V 80 TYP. 600V mA V/μs 50 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 150°C TYP. 2 V/μs tgt IG = 2 x IGT PW = 15µs IT = 11.3 A(pk) TYP. 12 μs Note: xx=voltage/10, x = package, Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants) Symbol IGT Test Conditions Quadrant VD = 12V RL = 60 Ω VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 150°C IH QJxx08xH4 Unit 20 35 mA I – II – III MAX. 1.3 I – II – III MIN. 0.15 MAX. 400V VD = VDRM Gate Open TJ = 150°C QJxx08xH3 10 MAX. Initial IT = 100mA dv/dt QJxx08xH2 I – II – III 600V MIN. V V 25 30 35 150 250 350 100 200 250 - - 450 800V mA V/μs (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 150°C MIN. 15 18 20 V/μs tgt IG = 12 x IGT PW= 15µs IT = 11.3 A(pk) TYP. 10 10 10 μs Note: xx=voltage/10, x = package Electrical Characteristics (TJ=25oC, unless otherwise specified) — Standard Triac Symbol IGT Test Conditions I – II – III VD = 12V RL = 60 Ω IV VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 150°C IH Initial IT = 100mA Valye Quadrant QJxx08x5 MAX. 50 50 Unit mA ALL MAX. 1.3 ALL MIN. 0.2 V V MAX. 50 mA dv/dt VD = VDRM Gate Open TJ = 150°C MIN. 1000 V/μs (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 150°C MIN. 4 V/μs tgt IG = 2X IGT PW = 15µs IT = 11.3A(pk) TYP. 11 μs 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Static Characteristics Symbol Test Conditions VTM Value ITM = 11.3A, tp = 380 μs LJxx08xy MAX 1.5 V TJ = 25oC 400-600V 10 µA TJ = 125oC 400-600V 0.5 TJ = 150 C 400-600V 3 TJ = 25oC 400-800V TJ = 125oC 400-800V TJ = 150oC 400-800V o IDRM/IRRM QJxx08xHy VDRM=VRRM mA 10 MAX µA 0.5 mA 3 TJ = 25oC 10 TJ = 125 C QJxx08x5 Unit 800V o µA 0.5 TJ = 150oC mA 4 Note: xx=voltage/10, x=package, y = sensitivity Thermal Resistances Symbol Parameter Value LJ/QJxx08Vyy RthJC Junction to case (AC) 1.5 LJ/QJxx08Dyy o QJxx08R5/QJxx08N5 1.2 QJxx08L5 2.3 LJ/QJxx08Vyy RthJA Junction to ambient Unit C/W 70 LJ/QJxx08Dyy o QJxx08R5/QJxx08N5 45 QJxx08L5 90 C/W Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants 1.8 ALL POLARITIES ARE REFERENCED TO MT1 + (+) REF - MT1 REF QII QI QIII QIV MT2 1.4 I GT GATE MT1 I GT MT2 IGT I GT GATE 1.6 IGT (TJ = 25°C) (-) MT2 POSITIVE (Positive Half Cycle) Ratio of MT2 + IGT MT2 1.2 1.0 0.8 0.6 0.4 (-) I GT GATE (+) MT1 REF - I GT GATE MT2 NEGATIVE (Negative Half Cycle) 0.2 MT1 0 -40 REF -15 10 35 60 85 110 135 150 Junction Temperature (TJ)- ºC NOTE: Alternistors will not operate in QIV Note: Alternistors will not operate in QIV 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature Figure 3: Normalized DC Holding Current vs. Junction Temperature 1.6 VGT 1.2 VGT (TJ = 25°C) 1.4 0.8 Ratio of Ratio of IH IH (TJ = 25°C) 1.6 1.2 1.0 0.8 0.6 0.4 0.4 0.2 0 -40 -15 10 35 60 85 110 0 150 135 -40 -15 10 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 60 85 110 150 135 Figure 6: Maximum Allowable Case Temperature vs. On-State Current 8 160 7 150 Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV)) - Watts 35 Junction Temperature (TJ)- ºC Junction Temperature (TJ)- ºC 6 5 4 3 2 QJxx08RHy/QJxx08NHy QJxx08RyQJxx08Ny LJxx08Vy & LJxx08Dy QJxx08VHy & QJxx08DHy 140 130 120 QJxx08LHy &QJxx08Ly 110 100 1 90 0 0 2 4 6 80 8 0 RMS On-State Current (IT(RMS)) - Amps 2 4 6 8 10 RMS On-State Current (IT(RMS)) - Amps Figure 7: On-State Current vs. On-State Voltage (Typical) 20 Postitive or Negative Instantaneous On-State Current (iT) - Amps 18 16 14 12 10 8 6 4 2 0 0.6 0.8 1 1.2 1.4 1.6 1.8 Postitive or Negative Instantaneous On-State Voltage (vT) - Volts 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Figure 8: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration- Full Cycles Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 tS time to peak temperature Body Material Terminal Material Time Environmental Specifications Physical Specifications Terminal Finish Ramp-do Ramp-down 100% Matte Tin-plated UL Recognized compound meeting flammability rating V-0. Copper Alloy Test AC Blocking (VDRM) Temperature Cycling Design Considerations Temperature/Humidity Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. High Temp Storage Low-Temp Storage Resistance to Solder Heat Solderability Lead Bend 6 Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours MIL-STD-750, M-1051, 1000 cycles; -55°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Dimensions — TO-251AA (V-Package) — V-PAK Through Hole TC MEASURING POINT E MT2 AREA: 0.040 IN2 H D Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C MT1 L F MT2 GATE G I Inches Millimeters Min Typ Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.52 0.58 1.32 P 0.042 0.047 0.052 1.06 1.20 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount MT2 E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension A 6.71 .264 5.34 .210 B 1.60 .063 P Q C 1.80 .071 GATE F MT1 MT2 AREA : 0.040 IN2 Connects to MT2 G 3 .118 4.60 .181 I O L K J H M N 7 Inches Millimeters Min Typ Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 6.22 B 0.235 0.243 0.245 5.97 6.16 C 0.106 0.108 0.113 2.69 2.74 2.87 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT A Ø E AREA (REF.) 0.17 IN2 O Dimension 8.13 .320 P MT2 B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H N K J MT1 Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). M MT2 GATE Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A Ø E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H K N J M Note: Maximum torque to be applied to mounting tab is 8 in-lbs, (0.904 Nm). MT1 MT2 GATE 8 Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount TC MEASURING POINT B AREA: 0.11 IN2 C V Dimension E MT2 7.01 .276 A 8.41 .331 S W U MT1 G J K GATE 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 10.67 B 0.380 0.420 9.65 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 3.81 .150 2.03 .080 6.60 .260 Product Selector Part Number Voltage 400V 600V Gate Sensitivity Quadrants 800V I – II – III IV Type Package TO-252 D-PAK LJxx08D8 x x - 10mA 20mA Sensitive Triac LJxx08V8 x x - 10mA 20mA Sensitive Triac TO-251 V-PAK QJxx08DH2 x x - 10mA - Alternistor Triac TO-252 D-PAK QJxx08VH2 x x - 10mA - Alternistor Triac TO-251 V-PAK QJxx08DH3 x x - 20mA - Alternistor Triac TO-252 D-PAK QJxx08VH3 x x - 20mA - Alternistor Triac TO-251 V-PAK QJxx08DH4 x x - 35mA - Alternistor Triac TO-252 D-PAK QJxx08VH4 x x - 35mA - Alternistor Triac TO-251 V-PAK QJxx08LH4 - - x 35mA - Alternistor Triac Alternistor Triac QJxx08RH4 - - x 35mA - Alternistor Triac Alternistor Triac QJxx08NH4 - - x 35mA - Alternistor Triac Alternistor Triac QJxx08L5 - - x 50mA 50mA Standard Triac Standard Triac QJxx08R5 - - x 50mA 50mA Standard Triac Standard Triac QJxx08N5 - - x 50mA 50mA Standard Triac Standard Triac Note: xx=voltage/10 9 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs Packing Options Part Number Marking Weight Packing Mode Base Quantity LJxx08D8TP LJxx08D8 LJxx08D8RP LJxx08D8 0.3g Tube Pack 750(75 per tube) 0.3g Embossed Carrier 2500 LJxx08V8TP LJxx08V8 0.4g Tube Pack 750(75 per tube) QJxx06VH2TP QJxx08VH2 0.3g Tube Pack 750(75 per tube) QJxx08DH2TP QJxx08DH2 0.3g Tube Pack 750(75 per tube) QJxx08DH2RP QJxx08DH2 0.3g Embossed Carrier 2500 750(75 per tube) QJxx08DH3TP QJxx08DH3 0.3g Tube Pack QJxx08DH3RP QJxx08DH3 0.3g Embossed Carrier 2500 QJxx08VH3TP QJxx08VH3 0.4g Tube Pack 750(75 per tube) QJxx08DH4TP QJxx08DH4 0.3g Tube Pack 750(75 per tube) QJxx08DH4RP QJxx08DH4 0.3g Embossed Carrier 2500 QJxx08VH4TP QJxx08VH4 0.4g Tube Pack 750(75 per tube) QJxx08LH4TP QJxx08LH4 2.2g Tube Pack 1000(50per tube) QJxx08RH4TP QJxx08RH4 2.2g Tube Pack 1000(50per tube) 1000(50per tube) QJxx08NH4TP QJxx08NH4 1.6g Tube Pack QJxx08NH4RP QJxx08NH4 1.6g Embossed Carrier 500 QJxx08L5TP QJxx08L5 2.2g Tube Pack 1000(50per tube) QJxx08R5TP QJxx08R5 2.2g Tube Pack 1000(50per tube) QJxx08N5TP QJxx08N5 1.6g Tube Pack 1000(50per tube) QJxx08N5RP QJxx08N5 1.6g Embossed Carrier 500 Note: xx=voltage/10 Part Numbering System Part Marking System QJ 60 08 V 8 LJ6008V8 COMPONENT TYPE LJ : HT Sensitive Triac QJ : HT Triac or Alternistor VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac 5 : 50mA(QI,II,III,IV) Alternistor Triac: H2 : 10mA(QI,II,III) H3 : 20mA(QI,II,III) H4 : 35mA(QI,II,III) YMLDD ® Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code PACKAGE TYPE V : TO-251 (VPAK) D : TO-252 (DPAK) L : TO-220 Isolated R : TO-220 Non Isolated N : TO-263 D2PAK 10 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21 Thyristor Datasheet LJxx08xx & QJxx08xHx & QJxx08xx Series 8 Amp High Temp Sensitive,Standard & Alternistor(High Communication)Triacs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.157 (4.0) Cover Tape* 0.315 (8.0) MT1 XXXXXX XX XXXXXX DC XX XXXXXX DC XX 0.524* (13.3) XXXXXX 0.63 (16.0) DC 0.059 Dia (1.5) Gate MT2 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and Millimeters) 0.64 (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Gate MT1 * * Cover tape MT2 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 11 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/07/21