RF0313-000

PolySwitch® Resettable PPTCs Surface Mount > SMD Series SMD Series RoHS Description The SMD series provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features • Broadest range of resettable devices available in industry • Low resistance • Small footprint - 2018, 2920 and 3425 • Fast time-to-trip • RoHS complaint, lead-free and halogen-free Agency Approvals AGENCY Applications AGENCY FILE NUMBER Mobile Electronics and Batteries E74889 78165 72161778 72161795 • Computer • Telephone and broadband • Portable electronics • Automotive • Multimedia • Industrial controls • Game machines • Battery Additional Information Datasheet Samples Resources Electrical Characteristics Part Number IH IT (A) (A) VMAX IMAX PD MAX (VDC) (A) (W) Max Time-to-trip RMIN R1MAX (A) (s) (Ω) (Ω) midSMD Series — Size 5050mm/2018mils SMD030F-2018 0.30 0.80 60 20 1.50 1.50 1.50 0.500 2.30 SMD100F-2018 1.10 2.20 15 40 1.40 8.00 0.50 0.100 0.40 SMD150F-2018 1.50 3.00 15 40 1.80 8.00 1.00 0.070 0.18 SMD200F-2018 2.00 4.20 6 40 1.50 8.00 3.00 0.048 0.10 SMD Series — Size 7555mm/2920mils SMD030F 0.30 0.60 60 10 1.70 1.50 3.00 1.200 4.800 SMD050F 0.50 1.00 60 10 1.70 2.50 4.00 0.350 1.400 SMD075F 0.75 1.50 30 40 1.70 8.00 0.30 0.350 1.000 SMD075F/60 0.75 1.50 60 10 1.70 8.00 0.30 0.350 1.000 Notes: IH : Hold current: maximum current device will pass without interruption in 20°C still air. IT : Trip current: minimum current that will switch the device from low resistance to high resistance in 20°C still air. VMAX : Maximum continuous voltage device can withstand without damage at rated current. IMAX : Maximum fault current device can withstand without damage at rated voltage. PD : Power dissipated from device when in the tripped state in 20°C still air. RMIN : Minimum resistance of device as supplied at 20°C unless otherwise specified. R1MAX : Maximum resistance measured one hour post-trip or post-reflow at 20°C. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PTCs Surface Mount > SMD Series Electrical Characteristics (Cont’d) Part Number IH IT VMAX IMAX PD MAX (A) (A) (VDC) (A) (W) Max Time-to-trip RMIN R1MAX (A) (s) (Ω) (Ω) SMD100F 1.10 2.20 30 40 1.70 8.00 0.50 0.120 0.480 SMD100F/33 1.10 2.20 33 SMDH120 1.20 2.30 16 40 1.70 8.00 0.50 0.120 0.410 50 2.00 8.00 2.00 0.150 0.340 SMD Series — Size 7555mm/2920mils SMD125F 1.25 2.50 15 40 1.70 8.00 2.00 0.070 0.250 SMD150F/33-2920 1.50 3.00 33 40 1.50 8.00 5.00 0.080 0.230 SMD200F/24-2920 2.00 4.00 24 40 1.50 8.00 5.00 0.050 0.125 SMD250F/15-2920 2.50 5.00 15 40 1.50 8.00 10.00 0.035 0.085 SMD260F 2.60 5.20 6 40 1.70 8.00 20.00 0.025 0.075 SMD300F 3.00 6.00 6 40 1.50 8.00 35.00 0.015 0.048 SMD300F/15 3.00 6.00 15 40 1.50 8.00 35.00 0.015 0.050 SMD2 Series — Size 8763mm/3425mils SMD150F 1.50 3.00 15 40 1.90 8.00 5.00 0.060 0.250 SMD150F/33 1.50 3.00 33 40 1.90 8.00 5.00 0.080 0.230 SMDH160 1.60 3.20 16 70 2.20 8.00 15.00 0.050 0.150 SMD185F 1.85 3.60 33 40 1.50 8.00 5.00 0.065 0.165 SMD200F 2.00 4.00 15 40 1.90 8.00 12.00 0.050 0.125 SMD250F 2.50 5.00 15 40 1.90 8.00 25.00 0.035 0.085 Notes: IH : Hold current: maximum current device will pass without interruption in 20°C still air. IT : Trip current: minimum current that will switch the device from low resistance to high resistance in 20°C still air. VMAX : Maximum continuous voltage device can withstand without damage at rated current. IMAX : Maximum fault current device can withstand without damage at rated voltage. PD : Power dissipated from device when in the tripped state in 20°C still air. RMIN : Minimum resistance of device as supplied at 20°C unless otherwise specified. R1MAX : Maximum resistance measured one hour post-trip or post-reflow at 20°C. Temperature Rerating Curve A = midSMD, SMD, SMD2 B = SMDH120, SMDH160 200 % of Rated Hold and Trip Current 180 160 140 A B 120 100 80 60 A 40 B 20 0 -40 -20 0 20 40 60 Ambient Temperature (°C) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 80 100 120 PolySwitch® Resettable PPTCs Surface Mount > SMD Series Temperature Rerating Maximum Ambient Temperature Part Number -40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 80°C 85°C 125°C Hold Current (A) midSMD Series — Size 5050mm/2018mils SMD030F-2018 0.48 0.42 0.35 0.30 0.28 0.24 0.21 0.17 0.15 0.12 0.10 — SMD100F-2018 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD150F-2018 2.21 1.97 1.70 1.50 1.43 1.26 1.15 1.00 0.91 0.79 0.73 — SMD200F-2018 2.81 2.54 2.27 2.00 1.93 1.73 1.59 1.46 1.32 1.19 1.12 — SMD Series — Size 7555mm/2920mils SMD030F 0.44 0.39 0.32 0.30 0.28 0.26 0.23 0.19 0.18 0.17 0.15 — SMD050F 0.73 0.65 0.55 0.50 0.47 0.43 0.39 0.33 0.31 0.28 0.26 — SMD075F 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 — SMD075F/60 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 — SMD100F 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD100F/33 1.48 1.35 1.20 1.10 1.06 0.98 0.91 0.83 0.79 0.73 0.69 — SMDH120 2.34 1.96 1.58 1.20 1.15 1.02 0.92 0.83 0.74 0.65 0.60 0.26 SMD125F 1.89 1.68 1.50 1.25 1.21 1.04 0.93 0.85 0.71 0.61 0.55 — SMD150F/33-2920 2.27 2.01 1.76 1.50 1.44 1.25 1.12 0.99 0.86 0.74 0.67 — SMD200F/24-2920 2.90 2.60 2.30 2.00 1.93 1.70 1.55 1.40 1.25 1.10 1.03 — SMD250F/15-2920 3.65 3.25 2.80 2.50 2.33 2.02 1.82 1.60 1.41 1.20 1.11 — SMD260F 3.82 3.41 2.90 2.60 2.45 2.19 1.99 1.70 1.58 1.38 1.28 — SMD300F 4.13 3.75 3.30 3.00 2.87 2.62 2.43 2.25 2.00 1.87 1.78 — SMD300F/15 4.20 3.80 3.30 3.00 2.90 2.62 2.43 2.25 2.00 1.87 1.78 — SMD2 Series — Size 8763mm/3425mils SMD150F 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMD150F/33 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMDH160 2.14 1.96 1.78 1.60 1.56 1.42 1.33 1.24 1.15 1.06 1.02 0.44 SMD185F 2.54 2.29 2.20 1.85 1.80 1.55 1.43 1.31 1.19 1.06 1.00 — SMD200F 3.01 2.67 2.30 2.00 1.90 1.66 1.50 1.30 1.16 0.99 0.91 — SMD250F 3.72 3.31 2.80 2.50 2.35 2.09 1.89 1.60 1.48 1.28 1.18 — © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PTCs Surface Mount > SMD Series Typical Time-to-Trip Curves at 20°C midSMD A = SMD030F-2018 B = SMD100F-2018 C = SMD150F-2018 D = SMD200F-2018 100 A C B D Time-to-Trip (s) 10 1 0.1 B 0.01 0.1 C D A 10 1 100 Fault Current (A) 100 B C G F D E K J H I A 10 Time-to-Trip (s) SMDxxxF A = SMD030F B = SMD050F C = SMD075F, SMD075F/60 D = SMD100F, SMD100F/33 E = SMDH120 F = SMD150F/33-2920 G = SMD125F H = SMD200F/24-2920 I = SMD250F/15-2920 J = SMD260F K = SMD300F, SMD300F/15 1 I K 0.1 J A C G D F E B 0.01 0.1 1 10 H 100 Fault Current (A) D 100 A C E B 10 Time-to-Trip (s) SMD2xxxF A = SMD150F, SMD150F/33 B = SMDH160 C = SMD185F D = SMD200F E = SMD250F 1 0.1 D B C E 0.01 A 1 10 Fault Current (A) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 100 PolySwitch® Resettable PPTCs Surface Mount > SMD Series Physical Specifications Terminal Pad Material Soldering Characteristics 100% Matte Tin with Nickel Underplate ANSI/J-STD-002 Category 3 (midSMD) ANSI/J-STD-002 Category 1 (SMD, SMD2) Solder Heat Withstand per IEC-STD 68-2-20, Test Tb, Section 5, Method 1a Flammability Resistance per IEC 695-2-2 Needle Flame Test for 20 seconds Environmental Specifications Test Test Method Storage Life PS300, Section 5.3.2 Humidity Aging PS300, Section 5.3.1 Thermal Shock MIL-STD-202, Method 107G Vibration MIL-STD-883C Solvent Resistance PS300, Section 5.2.2 Conditions Resistance Change 60°C, 1000 hrs ±3% typ 85°C, 1000 hrs ±3% typ 85°C, 85% R.H., 100 hrs ±1.2% typ 85°C, -40°C (20 Times) -33% typ 125°C, -55°C (10 Times) -33% typ per MIL-STD-883C No Change Freon No Change Trichloroethane No Change Hydrocarbons No Change Moisture Resistance Level Level 2a, J-STD-020 Storage Conditions 40°C max, 70% RH max; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these storage conditions are exceeded. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PTCs Surface Mount > SMD Series Dimension Figures B B A A C C C C FF D D D D H H B B EE A A D D EE G G B B Figure 1 FF EE A A Figure 2 Dimensions Dimensions in Millimeters (Inches) Part Number A Min B Max Min C Max Min D Max Min E Max Min F Max Min G Max H Min Max Min Figure midSMD Series — Size 5050mm/2018mils SMD030F-2018 4.72 5.44 (0.186) (0.214) — 1.78 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — 1 SMD100F-2018 4.72 5.44 (0.186) (0.214) — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — 1 SMD150F-2018 4.72 5.44 (0.186) (0.214) — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — 1 SMD200F-2018 4.72 5.44 (0.186) (0.214) — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — 1 SMD030F 6.73 7.98 (0.265) (0.314) — 3.18 (0.125) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD050F 6.73 7.98 (0.265) (0.314) — 3.18 (0.125) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD075F 6.73 7.98 (0.265) (0.314) — 3.18 (0.125) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD075F/60 6.73 7.98 (0.265) (0.314) — 3.18 (0.125) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD100F 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD100F/33 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMDH120 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD125F 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD Series — Size 7555mm/2920mils © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PPTCs Surface Mount > SMD Series Dimension Figures B B A A C C C C H H B B FF D D EE A A B B D D EE A A Figure 1 G G FF EE Figure 2 Dimensions (Cont’d) Dimensions in Millimeters (Inches) Part Number A Min B Max Min C Max Min D Max Min E Max Min F Max Min G Max Min H Max Figure Min SMD Series — Size 7555mm/2920mils SMD150F/33-2920 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD200F/24-2920 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD250F/15-2920 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD260F 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD300F 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD300F/15 6.73 7.98 (0.265) (0.314) — 3.00 (0.118) 4.80 (0.19) 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 2 SMD2 Series — Size 8763mm/3425mils SMD150F 8.00 (0.315) 9.40 (0.370) — 3.00 6.00 6.71 0.56 (0.118) (0.236) (0.264) (0.022) 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD150F/33 8.00 (0.315) 9.40 (0.370) — 3.00 6.00 (0.118) (0.236) 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) 0.43 (0.017) 2 SMDH160 8.00 9.40 (0.315) (0.370) — 3.00 6.00 (0.118) (0.236) 6.71 0.56 (0.264) (0.022) 0.43 (0.017) 2 SMD185F 8.00 9.40 (0.315) (0.370) — 3.00 6.00 (0.118) (0.236) 6.71 0.56 0.71 0.56 0.71 3.68 (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) 1.37 0.43 (0.054) (0.017) 2 SMD200F 8.00 9.40 (0.315) (0.370) — 3.00 6.00 (0.118) (0.236) 6.71 0.56 (0.264) (0.022) 0.71 0.56 0.71 3.68 3.94 0.66 1.37 (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) 0.43 (0.017) 2 SMD250F 8.00 9.40 (0.315) (0.370) — 3.00 6.00 (0.118) (0.236) 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) 0.43 (0.017) 2 0.71 0.56 0.71 3.68 3.94 0.66 1.37 (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) 3.94 0.66 (0.155) (0.026) 2 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PTCs Surface Mount > SMD Series Recommended Pad Layout A B C B Packaging and Marking Information Recommended Pad Layout Figures [mm (in)] Part Number Tape and Reel Quantity Standard Package Part Marking Dimension A (Nom) Dimension B (Nom) Dimension C (Nom) Agency Recognition midSMD Series — Size 5050mm/2018mils SMD030F-2018 4,000 20,000 A03F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV SMD100F-2018 4,000 20,000 A10F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV SMD150F-2018 4,000 20,000 A15F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV SMD200F-2018 4,000 20,000 A20F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV SMD Series — Size 7555mm/2920mils SMD030F 2,000 10,000 030F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD050F 2,000 10,000 050F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD075F 2,000 10,000 075F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD075F/60 2,000 10,000 756F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD100F 2,000 10,000 100F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD100F/33 2,000 10,000 103F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMDH120 2,000 10,000 H12 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD125F 2,000 10,000 125F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD150F/33-2920 2,000 10,000 S15F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD200F/24-2920 2,000 10,000 S20F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD250F/15-2920 2,000 10,000 S25F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD260F 2,000 10,000 260F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD300F 2,000 10,000 300F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD300F/15 2,000 10,000 315F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV SMD2 Series — Size 8763mm/3425mils SMD150F 1,500 7,500 150F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV SMD150F/33 1,500 7,500 153F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV SMDH160 1,500 7,500 160F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV SMD185F 1,500 7,500 185F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV SMD200F 1,500 7,500 200F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV SMD250F 1,500 7,500 250F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PPTCs Surface Mount > SMD Series Solder Reflow Recommendations Profile Feature Pb-Free Assembly Average ramp up rate (TsMAX to Tp) 3°C/s max Preheat 150°C • Temperature max (TsMAX) 200°C • Time (tsMIN to tsMAX) 60-120 s Time maintained above: • Temperature (TL) 217°C • Time (tL) 60-150 s Peak/Classification temperature (Tp) 260°C Temperature TL • Temperature min (TsMIN) tp Tp Critical Zone TL to Tp Ramp Up tL TsMAX TsMIN ts Preheat 25 Reflow Profile Ramp Down t 25˚C to Peak Time Time within 5°C of actual peak temperature Time (tp) 30 s max Ramp down rate 3°C/s max Time 25°C to peak temperature 8 min max Note: All temperatures refer to topside of the package, measured on the package body surface. Solder Reflow • Recommended reflow method: IR, hot air, nitrogen. • Recommended maximum paste thickness: 0.25mm (0.010in) • Devices can be cleaned using standard methods and aqueous solvents. • Experience has shown the optimum conditions for forming acceptable solder fillets occur when a reasonable amount of solder paste is placed underneath each device’s termination. As such, we request that customers comply with our recommended solder pad layouts. • Customer should validate that the solder paste amount and reflow recommendations meet its application. • We request that customer board layouts refrain from placing raised features (e.g. vias, nomenclature, traces, etc.) underneath PolySwitch devices. It is possible that raised features could negatively impact solderability performance of our devices. Rework • Standard industry practices. (Please also avoid direct contact to the device.) Part Ordering Number System SMD 150 F /33 -2920 -2 Packaging 2 = Tape and Reel Footprint Alternative Voltage Rating (If Applicable) Lead Free Hold Current Indicator Product Series © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PTCs Surface Mount > SMD Series Tape and Reel Specifications midSMD EIA 481-2 SMD EIA 481-2 SMD030F SMD050F SMD075F SMD075F/60 SMD100F SMD100F/33 SMDH120 SMD125F SMD150F/33-2920 SMD200F/24-2920 SMD250F/15-2920 SMD260F SMD300F SMD300F/15 SMD2 EIA 481-2 SMD150F SMD150F/33 SMDH160 SMD185F SMD200F SMD250F Description SMD030F-2018 SMD100F-2018 SMD150F-2018 SMD200F-2018 W 16.0 ± 0.30 16.0 ± 0.30 16.0 ± 0.30 P0 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 P1 8.0 ± 0.10 8.0 ± 0.10 12.0 ± 0.10 P2 2.0 ± 0.10 2.0 ± 0.10 2.0 ± 0.10 A0 5.11 ± 0.15 5.6 ± 0.23 6.9 ± 0.23 B0 5.6 ± 0.23 8.1 ± 0.15 9.6 ± 0.15 B1 max 6.4 12.1 12.1 D0 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 F 7.50 ± 0.10 7.50 ± 0.10 7.50 ± 0.10 E1 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 E2 min 14.25 14.25 14.25 T max 0.4 0.4 0.4 T1 max 0.1 0.1 0.1 K0 1.8 ± 0.15 3.2 ± 0.15 3.4 ± 0.15 A max 330 330 330 N min 50 50 50 W1 16.4 + 2.0/-.00 16.4 + 2.0/-.00 16.4 + 2.0/-.00 W2 max 22.4 22.4 22.4 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 PolySwitch® Resettable PPTCs Surface Mount > SMD Series Tape and Reel Diagrams T P0 Cover Tape D0 P2 E1 F B1 K0 W E2 B0 T1 A0 Embossment P1 Center lines of cavity Figure 1 W2 (Measured at Hub) Cover Tape A N (Hub Dia.) W1 (Measured at Hub) Carrier Tape Embossed Cavity Figure 2 WARNING • Users should independently evaluate the suitability of and test each product selected for their own application. • Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. • These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. • Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. • Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic components. • PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion. • Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19