RUSB090

PRODUCT: RUSB090 PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Overcurrent Protection Device Raychem Circuit Protection Products DOCUMENT: SCD 23853 PCN: 879885 REV LETTER: F REV DATE: AUGUST 15, 2007 PAGE NO.: 1 OF 1 Specification Status: RELEASED Electrical Rating Voltage: 16VDC MAX Current: 40A MAX Insulating Material: Cured Flame Retardant Epoxy Polymer meets UL 94-V-O Requirements Lead Material: 24 AWG Tin Lead Plated Nickel Copper Alloy Marking: TABLE I. DIMENSIONS: A mm: in*: MIN --- B MAX 7.4 (0.29) MIN --- C MAX 12.2 (0.48) MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.1 (0.12) TABLE II. PERFORMANCE RATINGS : I HOLD RATED CURRENT CURRENT RATINGS INITIAL RESISTANCE VALUES AMPERS AT 20°C HOLD 0.90 AMPERES AT 20°C HOLD TRIP 0.90 1.80 OHMS AT 20°C MIN TYP 0.07 0.10 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: ONE HOUR POST-TRIP RESISTANCE STANDARD TRIP OHMS AT 20°C MAX 0.18 TIME TO TRIP @ 8A TRIPPED- STATE POWER DISSIPATION SECONDS AT 20°C WATTS AT 20°C 1.2 0.6 UL, CSA, TUV recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. © 2003, 2007 Tyco Electronics Corporation. All rights reserved.