Thyristors
6 Amp Sensitive & Standard SCRs
Sxx06xSx & Sxx06x Series
RoHS
Description
This Sxx06x SCR series is ideal for uni-directional switch
applications such as phase control, heating, motor speed
controls, converters/rectifiers and capacitive discharge
ignitions.
These SCRs have a low gate current trigger level of 0.2 to
15 mA at approximately 1.5V, with a sensitive version of
this series having a gate trigger current less than 500µA.
The sensitive gate SCR version is easily triggered by sense
coils, proximity switches, and microprocessors.
Agency Approval
Features & Benefits
Agency
Agency File Number
E71639*
* - L Package Only
• Halogen free and
RoHS compliant
•S
urge capability up to
100 A at 60 Hz half cycle
• Glass – passivated
junctions
• L-Package is UL
recognized for 2500Vrms
• Voltage capability up
to 1000 V
Main Features
Applications
Symbol
Value
Unit
A
IT(RMS)
6
VDRM / VRRM
400 to 1000
V
IGT
0.2 to 15
mA
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition.
Also, AC control & rectification for power tools, home/
brown goods and white goods appliances and 2-wheeler
rectifier/battery regulators.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
Additional Information
Datasheet
Resources
Samples
A
K
G
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
IT(RMS)
IT(AV)
ITSM
Parameter
Test Conditions
RMS on-state current
Average on-state current
Peak non-repetitive surge current
Sxx06LSy
TC = 80°C
Sxx06NSy
Sxx06RSy
Sxx06DSy
Sxx06VSy
TC = 95°C
Sxx06LSy
TC = 80°C
Sxx06NSy
Sxx06RSy
Sxx06DSy
Sxx06VSy
TC = 95°C
Value
Unit
6
A
3.8
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
A
I2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
di/dt
Critical rate of rise of on-state current
f = 60Hz; TJ = 110°C
100
A/μs
IGTM
Peak gate current
TJ = 110°C
1
A
PG(AV)
Average gate power dissipation
TJ = 110°C
0.1
W
Tstg
Storage temperature range
-40 to 150
°C
TJ
Operating junction temperature range
-40 to 110
°C
Value
Unit
6
A
3.8
A
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
IT(AV)
ITSM
Parameter
RMS on-state current
Average on-state current
Peak non-repetitive surge current
Sxx06L
TC = 100°C
Sxx06N
Sxx06R
Sxx06D
Sxx06V
TC = 110°C
Sxx06L
TC = 100°C
Sxx06N
Sxx06R
Sxx06D
Sxx06V
TC = 110°C
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
A
I 2t
I2t value for fusing
tp = 8.3 ms
41
A2s
di/dt
Critical rate-of-rise of on-state current
f = 60Hz; TJ =125°C
100
A/μs
IGTM
Peak gate current
TJ = 125°C
2
A
PG(AV)
Average gate power dissipation
TJ = 125°C
0.5
W
Tstg
Storage temperature range
-40 to 150
°C
TJ
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive SCRs
Symbol
Value
Test Conditions
Sxx06xS2
Sxx06xS3
Unit
IGT
VD = 6V RL = 100 Ω
MAX.
VGT
VD = 6V RL = 100 Ω
MAX.
0.8
V
VD = VDRM; RGK = 1kΩ; TJ = 110°C
TYP.
8
V/μs
VGD
VD = VDRM RL = 3.3 kΩ TJ = 110°C
MIN.
0.2
V
VGRM
IGR = 10μA
MIN.
6
IH
IT = 20mA (initial)
MAX.
6
8
mA
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
50
45
μs
tgt
IG = 2 x IGT PW = 15µs IT = 12A
TYP.
4
5
μs
dv/dt
200
500
μA
V
Note: xx = voltage, x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard SCRs
Symbol
Value
Test Conditions
Sxx06x
Unit
IGT
VD = 12V RL = 60 Ω
MAX.
15
mA
VGT
VD = 12V RL = 60 Ω
MAX.
1.5
V
VD = VDRM; gate open; TJ = 100°C
dv/dt
400V
350
600V
300
800V
1000V
250
MIN.
400V
VD = VDRM; gate open; TJ = 125°C
VGD
100
V/μs
250
600V
225
800V
200
VD = VDRM RL = 3.3 kΩ TJ = 125°C
MIN.
0.2
V
IH
IT = 200mA (initial)
MAX.
30
mA
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
35
μs
tgt
IG = 2 x IGT PW = 15µs IT = 12A
TYP.
2
μs
Note: xx = voltage, x = package
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Static Characteristics
Symbol
Test Conditions
VTM
IT = 12A; tp = 380 µs
Sxx06xyy
IDRM / IRRM
TJ = 25°C
TJ = 110°C
TJ = 25°C
VDRM = VRRM
Sxx06x
TJ = 100°C
TJ = 125°C
MAX.
Value
Unit
1.6
V
400 – 600V
5
400 – 600V
250
400 – 800V
1000V
10
MAX.
μA
20
400 – 800V
200
1000V
3000
400 – 800V
500
Note: xx = voltage, x = package, yy = sensitivity
Thermal Resistances
Symbol
Rθ(J-C)
Rθ(J-A)
Parameter
Junction to case (AC)
Junction to ambient
Value
Sxx06RSy / Sxx06NSy
2.6
Sxx06LSy
4.3
Sxx06VSy
2.4
Sxx06DSy
1.8
Sxx06R / Sxx06N
2.5
Sxx06L
4.0
Sxx06V
2.3
Sxx06D
1.7
Sxx06RSy
40
Sxx06LSy
65
Sxx06VSy
85
Sxx06R
40
Sxx06L
50
Sxx06V
70
Unit
°C/W
°C/W
Note: xx = voltage, y = sensitivity
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: N
ormalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25ºC)
Ratio of IGT /IGT (TJ=25ºC)
4.0
3.0
2.0
3.0
2.0
1.0
1.0
0.0
0.0
-40
-15
10
85
60
35
-40
-15
110
110
125
110
125
Figure 4: N
ormalized DC Holding Current
vs. Junction Temperature
2.0
Ratio of IH / IH (TJ = 25ºC)
2.0
Ratio of VGT / VGT (TJ = 25ºC)
85
60
Junction Temperature (TJ) - (ºC)
Junction Temperature (TJ) - (ºC)
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
35
10
1.5
1.0
0.5
0.0
-40
-15
60
35
10
110
85
125
1.5
1.0
0.5
0.0
-40
-15
Junction Temperature (TJ) - (ºC)
35
10
85
60
Junction Temperature (TJ) - (ºC)
Figure 5: On-State Current vs. On-State Voltage
(Typical)
Figure 6: P
ower Dissipation (Typical) vs. RMS On-State
Current
6
30
TJ= 25°C
5
Average On-State Power
Dissipation [PD(AV)] - (Watts)
Instantaneous On-State
Current (iT) -Amps
25
20
15
10
5
4
3
2
1
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
Instantaneous On-State Voltage (vT) - Volts
1.5
1.6
0
0
1
2
3
4
5
6
RMS On-State Current [IT(RMS)] - (Amps)
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 8: M
aximum Allowable Case Temperature
vs. Average On-State Current
130
130
Sxx06R/Sxx06N
Sxx06R
Sxx06D
Sxx06V
120
Sxx06RSy/
Sxx06NSy
Sxx06RSy
115
Sxx06DSy
110
Sxx06L
105
100
95
90
Sxx06LSy
CURRENT WAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
85
1
2
Sxx06D
Sxx06V
120
Sxx06RSy/
Sxx06NSy
Sxx06RSy
115
Sxx06DSy
Sxx06VSy
110
Sxx06L
105
100
95
90
CURRENT WAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
85
80
0
Sxx06R/Sxx06N
Sxx06R
125
Maximum Allowable Case
Temperature (TC) - ºC
Maximum Allowable Case
Temperature (TC) - º C
125
3
4
5
6
80
7
0
1
RMS On-State Current [IT(RMS)] - Amps
Sxx06L
80
Sxx06LSy
Sxx06RSy
4
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
Maximum Allowable Ambient
Temperature (TA) - ºC
Maximum Allowable
Temperature (TA) - ºC
100
3
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx06R
2
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
120
Sx06LSy
Sxx06V
60
40
Sxx06VSy
20
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx06R
100
80
60
Sxx06L
Sxx06RSy
Sxx06LSy
Sxx06V
40
Sxx06VSy
20
0
0
0.0
0.5
1.0
1.5
2.0
0.0
2.5
0.5
RMS On-State Current [IT(RMS)] - Amps
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 12: P
eak Capacitor Discharge Current Derating
Figure 11: Peak Capacitor Discharge Current
1.2
Normalized Peak Current
Peak Discharge
Current (ITM) - Amps
1000
100
ITRM
1.0
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
10
0.5
1.0
10 .0
Pulse Current Duration (tw) - ms
50.0
0.0
0
25
50
75
100
125
150
Case Temperature (TC) - ºC
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 13-1: Typical DC Gate Trigger Current with RGK
vs. Junction Temperature for S6008DS2
Figure 13-2: Typical DC Gate Trigger Current with RGK
vs. Junction Temperature for SS6008DS3
Figure 14-1: Typical DC Holding Current with RGK
vs. Junction Temperature for S6008DS2
Figure 14-2 Typical DC Holding Current with RGK
vs. Junction Temperature for SS6008DS3
Figure 15-1: Typical Static dv/dt with RGK vs. Junction
Temperature for S6008DS2
Figure 15-2 Typical Static dv/dt with RGK vs. Junction
Temperature for SS6008DS3
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 16-1: Typical Static dv/dt with RGK vs. Junction
Temperature for S6008DS2
Figure 16-2 Typical Static dv/dt with RGK vs. Junction
Temperature for SS6008DS3
Figure 17: S
urge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive) On-State
Current (ITSM) – AMPS
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
10
1
Notes:
1. Gate control may be lost during and immediately following surge
current interval.
2. Overload may not be repeated until junction temperature has returned
to steady-state rated value.
1
10
100
1000
Surge Current Duration -- Full Cycles
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp) (TL)
to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak Temperature
(tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
rating 94V-0
Lead Material
Copper Alloy
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Design Considerations
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Environmental Specifications
Test
Specifications and Conditions
AC Blocking
MIL-STD-750, M-1040, Cond A Applied Peak AC
voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min dwell-time
Temperature/Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage
MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
Product Selector
Part Number
Voltage
Gate Sensitivity
Type
Package
-
0.2mA
Sensitive SCR
TO-220R
-
0.2mA
Sensitive SCR
TO-220L
-
-
0.2mA
Sensitive SCR
TO-251
X
-
-
0.2mA
Sensitive SCR
TO-252
X
X
-
-
0.5mA
Sensitive SCR
TO-220R
Sxx06LS3
X
X
-
-
0.5mA
Sensitive SCR
TO-220L
Sxx06VS3
X
X
-
-
0.5mA
Sensitive SCR
TO-251
Sxx06DS3
X
X
-
-
0.5mA
Sensitive SCR
TO-252
Sxx06R
X
X
X
X
15mA
Standard SCR
TO-220R
TO-220L
400V
600V
800V
1000V
Sxx06RS2
X
X
-
Sxx06LS2
X
X
-
Sxx06VS2
X
X
Sxx06DS2
X
Sxx06RS3
Sxx06L
X
X
X
X
15mA
Standard SCR
Sxx06V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx06D
X
X
X
X
15mA
Standard SCR
TO-252
Note: xx = voltage
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
E
Anode
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
L
F
Anode
GATE
G
Inches
Millimeters
Min
Typ
Max
Min
Typ
A
0.037
0.040
0.043
0.94
1.01
Max
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
I
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
1.60
.063
P
Q
C
1.80
.071
GATE
F
Cathode
Anode
AREA : 0.040 IN2
3
.118
G
I
O
L
K
M
N
J
H
4.60
.181
Inches
Millimeters
Min
Typ
Max
Min
Typ
A
0.037
0.040
0.043
0.94
1.01
Max
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Dimension
O
A
E
8.13
.320
P
A
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
2.92
B
0.105
0.115
2.67
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
0.380
0.420
9.65
10.67
2.92
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
A
Inches
Millimeters
B
0.105
0.115
2.67
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
L
0.060
0.075
1.52
1.91
H
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
B
C
13.36
.526
D
7.01
.276
F
R
G
CATHODE
ANODE GATE
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions — TO-263 (N Package) — D2Pak Surface Mount
Dimension
Inches
Millimeters
Min
Max
Min
A
0.360
0.370
9.14
Max
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.64
0.89
E
0.045
0.060
1.14
1.52
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.092
0.102
2.34
2.59
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.88
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx06L/RyyTP
Sxx06L/Ryy
2.2 g
Tube
1000 (50 per tube)
750 (75 per tube)
Sxx06DyyTP
Sxx06Dyy
0.3 g
Tube
Sxx06DyyRP
Sxx06Dyy
0.3 g
Embossed Carrier
2500
Sxx06VyyTP
Sxx06Vyy
0.4 g
Tube
750 (75 per tube)
Sxx06L/RTP
Sxx06L/R
2.2 g
Tube
1000 (50 per tube)
Sxx06DTP
Sxx06D
0.3 g
Tube
750 (75 per tube)
Sxx06DRP
Sxx06D
0.3 g
Embossed Carrier
2500
Sxx06VTP
Sxx06V
0.4 g
Tube
750 (75 per tube)
Sxx06NyyRP
Sxx6Nyy
1.6g
Embossed Carrier
500
Sxx06NyyTP
Sxx6Nyy
1.6g
Tube
1000 (50 per tube)
Sxx06NRP
Sxx6N
1.6g
Embossed Carrier
500
Sxx06NTP
Sxx6N
1.6g
Tube
1000 (50 per tube)
Note: xx = Voltage/10; yy = Sensitivity
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
6 Amp Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specs
TO-202 Type 1 (F Package)
TO-251
TO-252
Part Marking System
S6006F1
Meets all EIA-481-2 Standards
0.157
(4.0)
Gate
0.059
DIA
(1.5)
TO-251AA- (V Package)
yxxxx
TO-252AA- (D Package)
®
Cathode
®
YMLDD
* Cover tape
0.512 (13.0)
Arbor Hole
Diameter
0.315
(8.0)
YMLDD
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Anode
12.99
(330.0)
S6006DS2
XXXXXX
DC
XX
XXXXXX
DC
XX
XXXXXX
*
DC
0.524
(13.3)
XX
0.63
(16.0)
XXXXXX
S6006DS2
®
TO-263 AA - (N Package)
TO-220 AB - (L and R Package)
Dimensions
are in inches
(and millimeters).
S6006RS2
YMXXX
®
0.64
(16.3)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Direction of Feed
Part Numbering System
S 60 06 L S2 56
COMPONENT
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
06: 6A
LEAD FORM DIMENSIONS
xx: Lead Form Option
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
N: TO 263 (D2 Pak)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20