S4040NQ2TP

Teccor® brand Thyristors 40 Amp Low Tq SCR S4040xQx Series RoHS Description The S4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These fast turn-off time SCRs offer high dv/dt and high di/dt characteristics required in higher frequency (>1000 PPS) switching circuits. Features & Benefits • RoHS compliant • Glass – passivated junctions • Voltage capability up to 400 V Main Features Symbol Value Unit IT(RMS) 40 A VDRM /VRRM 400 V 15 to 65 mA IGT •S  urge capability up to 520 A • TO-220 and TO-263 packages Applications Fast turn-off time SCRs are ideal for multi phase voltage regulator circuits, DC/AC inverters, and higher frequency pulsing power supplies. Schematic Symbol A K G Absolute Maximum Ratings Parameter Test Conditions Value Unit IT(RMS) Symbol RMS on-state current TC = 100°C 40 A IT(AV) Average on-state current A ITSM I 2t di/dt IGM PG(AV) Tstg TJ S4040xQx Series TC = 100°C 25.0 single half cycle; f = 50Hz; TJ (initial) = 25°C 430 single half cycle; f = 60Hz; TJ (initial) = 25°C 520 I2t Value for fusing tp = 8.3 ms 1122 A2s Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 175 A/μs Peak gate current TJ = 125°C 3.5 A Average gate power dissipation TJ = 125°C Peak non-repetitive surge current A 0.8 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C 1 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol IGT Test Conditions Sxx40xQ Sxx40xQ2 Sxx40xQ3 MAX. 35 45 65 VD = 12V; RL = 30 Ω MIN. 15 30 38 VD = 12V; RL = 30Ω; TJ = -40°C MAX. VGT IGT dv/dt MAX. VD = VDRM; gate open; TJ = 100°C mA 1.5 75 95 V 160 mA 650 MIN. VD = VDRM; gate open; TJ = 125°C Unit V/μs 550 VGD VD = VDRM; RL = 3.3 kΩ; TJ = 125°C MIN. IH IT = 400mA (initial) MAX. 70 120 200 mA tq (1) MAX. 15 12 5 μs tgt IG = 2 x IGT; PW = 15µs; IT = 80A 3.5 μs S4040xQ3 Unit 2.2 V 0.2 TYP. 3.0 V Note : (1) IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs Static Characteristics Symbol Test Conditions VTM IDRM / IRRM S4040xQ IT = 80A; tp = 380μs VDRM / VRRM MAX. S4040xQ2 1.8 TJ = 25°C 10 TJ = 100°C 1000 MAX. TJ = 125°C μA 2000 Thermal Resistances Symbol Parameter Value Unit Rθ(J-C) Junction to case (AC) 0.6 °C/W Rθ(J-A) Junction to ambient 40 °C/W S4040xQx Series 2 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Voltage vs. Junction Temperature 3.0 2.0 Ratio of VGT / VGT (TJ = 25°C) 2.5 S4040xQ3 Ratio of IGT / IGT (TJ = 25°C) 2.0 1.5 S4040xQ/xQ2 1.0 1.5 S4040xQ/xQ2 1.0 S4040xQ3 0.5 0.5 0.0 -40 0.0 -40 -15 10 35 60 85 110 -15 10 35 60 85 110 125 Junction Temperature (TJ ) - (°C) 125 Junction Temperature (TJ ) - (°C) Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: O  n-State Current vs. On-State Voltage (Typical) 120 2.5 TJ = 25°C 100 Instantaneous On-state Current (iT) – Amps Ratio of IH / IH (TJ = 25°C) 2.0 1.5 S4040xQ/xQ2 1.0 S4040xQ/xQ2 60 40 S4040xQ3 20 S4040xQ3 0.5 80 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 0.0 -40 -15 10 35 60 85 110 125 Instantaneous On-state Voltage (vT) – Volts Junction Temperature (T J) -- (°C) Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current 50 130 45 125 120 Maximum Allowable Case Temperature (TC )- °C Average On-State Power Dissipation [PD(AV)] - (Watts) 40 35 30 S4040xQ3 25 20 15 S4040xQ/xQ2 10 115 110 105 100 95 90 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 75 5 70 0 0 5 10 15 20 25 30 35 0 40 S4040xQx Series 5 10 15 20 25 30 35 40 45 50 RMS On-State Current [IT(RMS)] - Amps RMS On-State Current [IT(RMS)] - (Amps) 3 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current 130 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Maximum Allowable Ambient Temperature (TA) - °C 125 Maximum Allowable Case Temperature (TC) - °C 120 115 110 105 100 95 90 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 85 100 80 60 40 20 0 80 0 5 10 15 20 25 0.0 0.5 Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current 1.5 2.0 2.5 Figure 10: Peak Capacitor Discharge Current 10000 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 100 Peak Discharge Current (ITM) - Amps Maximum Allowable Ambient Temperature (Tc) - °C 1.0 RMS On-State Current [IT(RMS)] - Amps Average On-State Current [IT(AVE)] - Amps 80 60 40 20 1000 ITRM tW 100 0 0.0 0.5 0.5 1.5 1.0 Average On-State Current [IT(AVE)] - Amps 1.0 10.0 50.0 Pulse Current Duration (tw) - ms Figure 11: Peak Capacitor Discharge Current Derating 1.2 Normalized Peak Current 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (TC) - °C S4040xQx Series 4 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C S4040xQx Series tP TP Temperature Reflow Condition tL TS(max) Preheat TS(min) 25 5 Ramp-up TL Ramp-do Ramp-down tS time to peak temperature Time ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Specifications and Conditions AC Blocking Temperature Cycling Temperature/ Humidity MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Design Considerations High Temp Storage Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE A B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). S4040xQx Series 6 Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Dimensions – TO- 263 (N-package) — D2-Pak Surface Mount TC MEASURING POINT B Dimension E ANODE 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J H D 8.13 .320 F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 Inches AREA: 0.11 in 2 C V 1.40 .055 3.81 .150 Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.63 0.89 E 0.048 0.055 1.22 1.40 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.083 0.093 2.11 2.36 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.87 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 2.03 .080 6.60 .260 Part Numbering System S 40 40 R Q DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V CURRENT RATING 40: 40A PACKAGE TYPE R: TO-220 (Non-isolated) N: TO-263 (D2 - Pak) Part Marking System TO-220 AB - (R Package) TO-263 (N Package) 56 Lead Form Dimensions xx: Lead Form Option S4040RQ YM TURN-OFF TIME [blank]: 15μs 2: 12μs 3: 5μs ® LOW TURN OFF TIME TYPE Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code S4040xQx Series 7 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15 Teccor® brand Thyristors 40 Amp Low Tq SCR Product Selector Part Number Voltage 400V Gate Sensitivity Type Package 15-35 Standard SCR TO-220AB S4040RQ X S4040NQ X 15-35 Standard SCR TO-263 S4040RQ2 X 30-45 Standard SCR TO-220AB S4040NQ2 X 30-45 Standard SCR TO-263 S4040RQ3 X 38-65 Standard SCR TO-220AB S4040NQ3 X 38-65 Standard SCR TO-263 Packing Options Part Number Marking Weight Packing Mode Base Quantity S4040RQTP S4040RQ 2.2g Tube 500 (50 per tube) S4040RQ2TP S4040RQ2 2.2g Tube 500 (50 per tube) S4040RQ3TP S4040RQ3 2.2g Tube 500 (50 per tube) S4040NQRP S4040NQ 1.6g Embossed Carrier 500 S4040NQ2RP S4040NQ2 1.6g Embossed Carrier 500 S4040NQ3RP S4040NQ3 1.6g Embossed Carrier 500 Reel Pack (RP) for TO-263 Embossed Carrier Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed S4040xQx Series 8 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 12/09/15