S6002TSRP

S6002xS Thyristor Datasheet S6002xS Series EV Series 2 A Sensitive SCRs Product Summary Characteristic Value Unit A IT(RMS) 2 VDRM / VRRM 600 V IGT 200 µA Product Description The S6002xS offers very high di/dt capability through small die planar construction design. It is glass-passivated to ensure long term reliability and parametric stability. Agency Approvals and Environmental Environmental Approvals Features • Surge capability > 25 A • Blocking voltage (VDRM/VRRM) capability up to 600 V • High di/dt capability of 500 A/µs • Improved turn-off time (tq) < 55 µsec • Sensitive gate for direct microprocessor interface • Through-hole and surface mount packages • RoHS compliant and Halogen-free Schematic Symbol Applications • The S6002xS is specifically designed for capacitor discharge application such as highpower gas flame ignition. 1 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 1. Maximum Ratings...........................................................................................................................................3 2. Thermal Characteristics ..................................................................................................................................3 3. Electrical Characteristics (TJ = 25 °C unless otherwise specified) .................................................................3 4. Static Characteristics (TJ = 25 °C unless otherwise specified) .......................................................................3 5. Performance Curves .......................................................................................................................................4 6. Soldering Parameters .....................................................................................................................................6 7. Physical Specifications....................................................................................................................................6 8. Environmental Specifications..........................................................................................................................6 9. Design Considerations ....................................................................................................................................6 10. Package Dimensions ....................................................................................................................................7 11. Part Numbering and Marking ........................................................................................................................8 12. Product Selector ...........................................................................................................................................9 13. Packing Options ............................................................................................................................................9 14. Packing Specifications ..................................................................................................................................9 2 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 1. Maximum Ratings Symbol Characteristic Conditions RMS On-state Current (Full Sine Wave) IT(RMS) IT(AV) Average On-state Current ITSM Non-repetitive Surge Peak On-state Current (Full Cycle, TJ Initial = 25 °C) I2t I2t Value for Fusing IGM TC = 65 °C TC = 95 °C Compak TC = 75 °C Unit 2 A 1.2 A TO-92 TC = 65 °C SOT-223 TC = 95 °C Compak TC = 75 °C TO-92 SOT-223 Compak f = 50 Hz 22.5 f = 60 Hz 25.0 f = 50 Hz, tp = 10 ms 2.5 A2s TJ =25 °C 500 A/µs tp = 20 µs, TJ =125 °C 1.0 A TO-92 SOT-223 Compak Critical Rate of Rise of On-state Current IG = 10 mA di/dt TO-92 SOT-223 Value Peak Gate Current PG(AV) Average Gate Power Dissipation 0.2 W TSTG Storage Junction Temperature -40 to 150 °C Operating Junction Temperature -40 to 125 °C Value Unit TJ TJ =125 °C A 2. Thermal Characteristics Symbol Rth(JC) Characteristic Thermal Resistance, junction-to-case (AC) Rth(JA) Thermal Resistance, junction-to-ambient (AC) 3. Electrical Characteristics (T J Symbol IT = 1.5 A (RMS)1 TO-92 30 SOT-223 15 Compak 25 TO-92 160 SOT-223 60 IT = 1.5 A (RMS)1 °C/W °C/W = 25 °C unless otherwise specified) Description Value Conditions Unit Min Max 20 200 µA V IGT DC Gate Trigger Current VD = 6 V, RL VGT DC Gate Trigger Voltage VD = 6 V, RL - 0.8 VGRM Peak Reverse Gate Voltage IRG = 10 µA 5 - V Holding Current RGK - 5 mA Gate Non-trigger Voltage VD = VDRM, RGK = 1 0.2 - V Critical Rate-of-rise of Off-stage Voltage TJ = 125 °C, VD = 67% VDRM, Exponential Waveform, RGK 25 - V/µs tq Turn-off Time IT = 0.5 A - 55 µs tgt Turn-on Time IG = 10 mA, PW = 15 - 5 µs IH VGD dv/dt 4. Static Characteristics (T J Symbol VTM IDRM/IRRM , TJ = 125 °C ec, IT = 3.0 A(PK) = 25 °C unless otherwise specified) Description Conditions Peak On-state Voltage ITM = 3 A(PK), tP = 380 µs Off-state Current, Peak Repetitive TJ = 25 °C @ VD= VDRM, RGK TJ = 125 °C @ VD= VDRM, RGK 3 Value Unit Min Max - 1.5 V - 5 µA - 500 µA Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 5. Performance Curves Figure 2. Normalized DC Gate Trigger Voltage vs. Junction Temperature 3 1.4 Ratio of I𝐺𝑇/(I𝐺𝑇 (𝑇𝐽 = 25 °𝐶)) X Figure 1. Normalized DC Gate Trigger Current vs. Junction Temperature 1.2 Ratio of V𝐺𝑇/(V𝐺𝑇 (𝑇𝐽 = 25 °𝐶) X 2.5 2 1 0.8 1.5 0.6 1 0.4 0.5 0.2 0 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 -40 -25 Junction Temperature, TJ (°C) -10 5 20 35 50 65 80 95 110 125 Junction Temperature, TJ (°C) Figure 3. Normalized DC Holding Current vs. Junction Temperature Figure 4. Typical On-state Current vs. On-state Voltage 1.2 2.5 1 On-state Current, IT (A)) Ratio of IH/(IH (𝑇𝐽 = 25 °𝐶) X 3 2 1.5 1 0.5 0 0.8 0.6 0.4 0.2 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 On-state Voltage, VT (V) Junction Temperature, TJ (°C) 4 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet Figure 6. Maximum Allowable Case Temperature vs. RMS Onstate Current 1.2 130 SOT-223 & Compak 120 1 Maximum Allowable Case Temperature, TC (°C) Average On-state Power Dissipation, PD(AV) (W) Figure 5. Typical Power Dissipation vs. RMS On-state Current 0.8 0.6 0.4 0.2 110 100 TO-92 90 80 Current: Waveform: Sinusoidal Load: Resistive or Inductive Conduction Angle: 180° Case Temperature: Measured as shown on Dimensional Drawing 70 60 0 50 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 RMS On-state Current, TT(RMS) (A) 0.5 1 1.5 RMS On-state Current, IT(RMS) (A) Peak Surge (Non-repetitive) On-state Current, ITSM (A) Figure 7. Surge Peak On-state Current vs. Number of Cycles Notes: 1. Gate control may be lost during and immediately following surge current interval. 10 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Supply Frequency: 60 Hz Sinusoidal Load: Resistive RMS On-state, IT(RMS): Max Rated Value at Specific Case Temperature 1 1 10 100 1000 Surge Current Duration - Full Cycle Figure 9. Peak Repetitive Sinusoidal Pulse Current 180 180 160 160 Peak Discharge Current, ITM (A) Peak Discharge Current, ITM (A) Figure 8. Peak Repetitive Capacitor Discharge Current 140 1 Hz 120 12 Hz 100 60 Hz 80 60 40 20 0 140 120 1 Hz 100 12 Hz 80 60 60 Hz 40 20 0 1 10 100 1 Pulse Current Duration, tw (µs) 10 100 Pulse Current Duration, tw (µs) 5 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 6. Soldering Parameters Parameter Value Reflow Condition Pre-Heat Pb-free Assembly Temperature Min, TS(Min) 150 °C Temperature Max, TS(Max) 200 °C Time (Min to Max), ts 60 to 180 s Average Ramp-up Rate Liquidus Temp., TL to peak 5 °C/s (Max) TS(Max) to TL Ramp-up Rate 5 °C/s (Max) Temperature, TL Liquidus Reflow 217 °C Time, tL 60 to 150 s Peak Temperature, TP 260 °C (±5 °C) Time within 5 °C of Actual Peak Temperature, tP 20 to 40 s Ramp-down Rate 5 °C/s (Max) Time 25 °C to Peak Temperature, TP 8 minutes (Max) Do Not Exceed 7. Physical Specifications Device Feature 280 °C 8. Environmental Specifications Detail Test Terminal Finish 100% Matte Tin-plated AC Blocking Body Material UL Recognized Epoxy meeting Flammability Rating 94 V-0 Temperature Cycling Terminal Material Copper Alloy Temperature/Humidity 9. Design Considerations Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 1000 cycles; -40°C to +150°C; 15 min dwell time EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% relative humidity High-temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-temp Storage 1008 hours; -40°C Careful selection of the correct component for the Resistance to Solder Heat MIL-STD-750 Method 2031 will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E 6 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 10. Package Dimensions TO-92 (E- Package) Millimeters Dimension Inches Min Max Min Max A 4.450 5.200 0.175 0.205 B 4.320 5.330 0.170 0.210 - C 12.700 - 0.500 D 3.430 - 0.135 - E 3.180 4.190 0.125 0.165 F 2.040 2.660 0.080 0.105 G 0.407 0.533 0.016 0.021 H 1.150 1.390 0.045 0.055 I 2.420 2.660 0.095 0.105 J 0.380 0.500 0.015 0.020 SOT-223 Dimension Inches Min Typ Max Min Typ Max A 6.30 6.50 6.70 0.248 0.256 0.264 B 3.30 3.50 3.70 0.130 0.138 0.146 C - - 1.80 - - 0.071 D 0.02 - 0.10 0.001 - 0.004 E 2.90 3.00 3.15 0.114 0.118 0.124 F 0.60 0.70 0.85 0.024 0.027 0.034 G - 2.30 - - 0.090 - H - 4.60 - - 0.181 - I 6.70 7.00 7.30 0.264 0.276 0.287 J 0.24 0.26 0.35 0.009 0.010 0.014 K 7 Millimeters 10° Max Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet Compak (C- Package) Dimension Millimeters Inches Min Max Min Max A 3.30 3.95 0.130 0.156 B 5.10 5.60 0.201 0.220 C 1.95 2.20 0.077 0.087 D 4.05 4.60 0.159 0.181 E 0.75 1.60 0.030 0.063 F 1.90 2.45 0.075 0.096 G 0.05 0.20 0.002 0.008 H 1.95 2.65 0.077 0.104 J 1.09 1.35 0.043 0.053 K 0.15 0.41 0.006 0.016 L 0.76 1.40 0.030 0.055 M 0.56 0.71 0.022 0.028 N 0.69 0.84 0.027 0.033 P 1.32 1.47 0.052 0.058 11. Part Numbering and Marking Compak (C Package) 8 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet 12. Product Selector Part Number Voltage 600 V Gate Sensitivity S6002ES X 200 µA TO-92 S6002TS X 200 µA SOT-223 S6002CS X 200 µA Compak Package 13. Packing Options Part Number Marking Weight Packing Mode M.O.Q S6002ES S6002ES 0.217 g Bulk 2500 S6002ESAP S6002ES 0.217 g Ammo Pack 2000 S6002ESRP S6002ES 0.217 g Tape & Reel 2000 S6002TSRP S6002TS 0.120 g Tape & Reel 1000 S6002CSRP S6002CS 0.120 g Tape & Reel 2500 14. Packing Specifications TO-92 (3-Lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards 9 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet TO-92 (3-Lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards SOT-223 Reel Pack (RP) Specifications 10 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021 S6002xS Thyristor Datasheet Compak Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-1 Standards For additional information please visit www.Littelfuse.com/powersemi Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly forth in applicable Littelfuse product documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics 11 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 8/3/2021