Thyristors
10 Amp Sensitive & Standard SCRs
Sxx10xSx & Sxx10x Series
RoHS
Description
This Sxx10x SCR series is ideal for uni-directional switch
applications such as phase control, heating, motor speed
controls, converters/rectifiers and capacitive discharge
ignitions.
These SCRs have a low gate current trigger level of 0.2 to
15 mA at approximately 1.5V, with a sensitive version of
this series having a gate trigger current less than 500µA.
The sensitive gate SCR version is easily triggered by sense
coils, proximity switches, and microprocessors.
Main Features
Features & Benefits
Symbol
Value
Unit
IT(RMS)
10
A
VDRM / VRRM
400 to 1000
V
IGT
0.2 to 15
mA
Additional Information
Datasheet
Resources
• Halogen-free and
RoHS-compliant
• Voltage capability up
to 1000 V
• Glass – passivated
junctions
• Surge capability up
to 100 A at 60 Hz
half cycle
Applications
Samples
Typical applications includes capacitive discharge system
for motorcycle engine CDI, portable generator engine
ignition, strobe lights and nailers, as well as generic
rectifiers, battery voltage regulators and converters. Also
AC control & rectification for power tools, home/brown
goods, white goods appliances and 2-wheeler rectifier/
battery regulators.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
G
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
IT(RMS)
IT(AV)
ITSM
Parameter
RMS on-state current
Average on-state current
Peak non-repetitive surge current
Test Conditions
Sxx10LSy
TC = 80°C
Sxx10RSy /Sxx10NSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Sxx10LSy
TC = 80°C
Sxx10RSy /Sxx10NSy
Sxx10DSy
Sxx10VSy
TC = 95°C
Value
Unit
10
A
6.4
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
A
I2t
I2t Value for fusing
tp = 8.3 ms
41
A 2s
di/dt
Critical rate of rise of on-state current
f = 60 Hz ; TJ = 110°C
100
A/μs
IGM
Peak gate current
TJ = 110°C
1
A
PG(AV)
Average gate power dissipation
TJ = 110°C
0.1
W
Tstg
Storage temperature range
-40 to 150
°C
TJ
Operating junction temperature range
-40 to 110
°C
Value
Unit
10
A
6.4
A
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
IT(AV)
ITSM
Parameter
RMS on-state current
Average on-state current
Peak non-repetitive surge current
Test Conditions
Sxx10L
TC = 95°C
Sxx10R / Sxx10N
Sxx10D
Sxx10V
TC = 105°C
Sxx10L
TC = 95°C
Sxx10R / Sxx10N
Sxx10D
Sxx10V
TC = 105°C
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
A
I2t
I2t Value for fusing
tp = 8.3 ms
41
A 2s
di/dt
Critical rate-of-rise of on-state current
f = 60 Hz TJ = 125°C
100
A/μs
IGM
Peak gate current
TJ = 125°C
2
A
PG(AV)
Average gate power dissipation
TJ = 125°C
0.5
W
Tstg
Storage temperature range
-40 to 150
°C
TJ
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
Value
Test Conditions
Sxx10xS2
Sxx10xS3
Unit
IGT
VD = 6V RL = 100 Ω
MAX.
VGT
VD = 6V RL = 100 Ω
MAX.
0.8
V
200
500
μA
dv/dt
VD = VDRM; RGK = 1kΩ ; TJ = 110°C
TYP.
8
V/μs
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 110°C
MIN.
0.2
V
VGRM
IGR = 10μA
MIN.
6
IH
IT = 20mA (initial)
MAX.
6
8
mA
tq
(1)
MAX.
50
45
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 12A
TYP.
4
5
μs
V
Note: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Symbol
Value
Test Conditions
Sxx10x
Unit
IGT
VD = 12V RL = 60 Ω
-
MAX.
15
mA
VGT
VD = 12V RL = 60 Ω
-
MAX.
1.5
V
VD = VDRM; gate open; TJ = 100°C
400V
350
600V
300
800V
dv/dt
1000V
250
MIN.
400V
VD = VDRM; gate open; TJ = 125°C
VGD
100
V/μs
250
600V
225
800V
200
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
-
MIN.
0.2
V
IH
IT = 200mA (initial)
-
MAX.
30
mA
tq
(1)
-
MAX.
35
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 20A
-
TYP.
2
μs
Note: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
VTM
IT = 20A; tp = 380 µs
Sxx10xyy
IDRM / IRRM
Sxx10x
Value
Unit
1.6
V
TJ = 25°C
400 - 600V
5
TJ = 110°C
400 - 600V
250
TJ = 25°C
VDRM / VRRM
MAX.
TJ = 100°C
TJ = 125°C
400 - 800V
1000V
10
MAX.
20
400 - 800V
200
1000V
3000
400 - 800V
500
μA
Note: xx = voltage, x = package, yy = sensitivity
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Thermal Resistances
Symbol
Parameter
Value
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Sxx10RSy / Sxx10NSy
1.6
Sxx10LSy
3.0
Sxx10VSy
1.7
Sxx10DSy
1.45
Sxx10R / Sxx10N
1.6
Sxx10L
3.0
Sxx10V
1.7
Sxx10D
1.45
Sxx10RSy
40
Sxx10LSy
65
Sxx10VSy
85
Sxx10R
40
Sxx10L
50
Sxx10V
70
Unit
°C/W
°C/W
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: N
ormalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
85
3.0
2.0
1.0
0.0
110
-40
-15
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
60
85
110
125
2.0
Ratio of IH / IH (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
35
Figure 4: N
ormalized DC Holding Current
vs. Junction Temperature
2.0
1.5
1.0
0.5
0.0
10
Junction Temperature (TJ) -- (°C)
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
Junction Temperature (TJ) -- (°C)
110
125
-40
-15
10
35
60
85
110
125
Junction Temperature (TJ) -- (°C)
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Figure 5: On-State Current vs. On-State
Voltage (Typical)
Figure 6: P
ower Dissipation (Typical) vs. RMS
On-State Current
10
32
Average On-State Power Dissipation
[PD(AV)] -- (Watts)
Instantaneous On-state Current
(iT) – Amps
TJ = 25ºC
28
24
20
16
12
8
4
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
9
8
7
6
5
4
3
2
1
0
1.6
0
1
2
Instantaneous On-state Voltage (vT) – Volts
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
130
125
125
Maximum Allowable Case
Temperature (TC) - °C
Maximum Allowable Case
Temperature (TC) - °C
110
105
Sxx10RSy/
Sxx10RSy
Sxx10NSy
100
Sxx10DSy
Sxx10VSy
95
90
Sxx10LSy
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
75
7
8
9
10
Sxx10R/
Sxx10R
Sxx10N
Sxx10L
Sxx10D
Sxx10V
5
6
110
105
100
Sxx10RSy/
Sxx10RSy
Sxx10NSy
Sxx10DSy
Sxx10VSy
95
90
Sxx10LSy
85
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
75
70
0
1
2
3
4
5
6
7
8
9
10
11
0
1
RMS On-State Current [IT(RMS)] - Amps
2
3
4
7
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
120
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
100
Maximum Allowable Ambient
Temperature (TA) - °C
Maximum Allowable Case Temperature
(TC) - °C
6
115
80
70
Sxx10L
80
60
5
120
Sxx10R
Sxx10D
Sxx10V
Sxx10L
115
4
Figure 8: M
aximum Allowable Case Temperature
vs. Average On-State Current
130
120
3
RMS On-State Current [IT(RMS)] -- (Amps)
Sxx10V
Sxx10RSy
Sxx10LSy
40
Sxx10VSy
20
Sxx10R
100
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10L
80
Sxx10RSy
Sxx10LSy
60
Sxx10V
40
Sxx10VSy
20
0
0
0.0
0.5
1.0
1.5
2.0
Average On-State Current [IT(RMS)] - Amps
Note: xx = voltage, y = sensitivity
2.5
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Figure 11: Peak Capacitor Discharge Current
Figure 12: P
eak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
1000
100
ITRM
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
10
0.5
1.0
0.0
10.0
50.0
Pulse Current Duration (tW) - ms
0
25
50
75
100
125
150
Case Temperature (TC) - °C
Figure 13-1: Typical DC Holding Current with RGK
vs. Junction Temperature for S60010xS2
Figure 13-1: Typical DC Holding Current with RGK
vs. Junction Temperature for S60010xS3
Figure 14-1: Typical DC Holding Current with RGK
vs. Junction Temperature for S60010xS2
Figure 14-2: Typical DC Holding Current with RGK
vs. Junction Temperature for S60010xS3
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Figure 15-1: Typical Static dv/dt with RGK vs. Junction
Temperature for S60010xS2
Figure 15-2: Typical Static dv/dt with RGK vs. Junction
Temperature for S60010xS3
Figure 16-1: Typical turn off time with RGK vs. Junction
Temperature for S60010xS2
Figure 16-2: Typical DC Gate Trigger Current with RGK
vs. Junction Temperature for S60010xS3
Figure 17: S
urge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
100
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp) (TL) to
peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260
Time within 5°C of actual peak Temperature
(tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
tP
TP
°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL Recognized epoxy meeting flammability
rating 94V-0
Lead Material
Copper Alloy
Design Considerations
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Environmental Specifications
Test
Specifications and Conditions
AC Blocking
MIL-STD-750, M-1040, Cond A Applied Peak
AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min dwell-time
Temperature/Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage
MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
-
0.2mA
Sensitive SCR
TO-220R
-
0.2mA
Sensitive SCR
TO-220L
-
-
0.2mA
Sensitive SCR
TO-251
X
-
-
0.2mA
Sensitive SCR
TO-252
X
X
-
-
0.5mA
Sensitive SCR
TO-220R
400V
600V
800V
1000V
Sxx10RS2
X
X
-
Sxx10LS2
X
X
-
Sxx10VS2
X
X
Sxx10DS2
X
Sxx10RS3
Sxx10LS3
X
X
-
-
0.5mA
Sensitive SCR
TO-220L
Sxx10VS3
X
X
-
-
0.5mA
Sensitive SCR
TO-251
Sxx10DS3
X
X
-
-
0.5mA
Sensitive SCR
TO-252
Sxx10R
X
X
X
X
15mA
Standard SCR
TO-220R
TO-220L
Sxx10L
X
X
X
X
15mA
Standard SCR
Sxx10V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx10D
X
X
X
X
15mA
Standard SCR
TO-252
Sxx10NS2
X
X
-
-
15mA
Sensitive SCR
TO-263
Sxx10NS3
X
X
-
-
15mA
Sensitive SCR
TO-263
Sxx10N
X
X
X
X
15mA
Standard SCR
TO-263
Note: xx = Voltage/10
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
Anode
E
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
Anode
GATE
F
G
L
Inches
Millimeters
Min
Typ
Max
Min
Typ
A
0.037
0.040
0.043
0.94
1.01
Max
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
I
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
1.60
.063
P
Q
C
1.80
.071
GATE
F
Cathode
Anode
AREA : 0.040 IN2
3
.118
G
4.60
.181
I
O
L
K
J
H
M
N
Inches
Millimeters
Min
Typ
Max
Min
Typ
A
0.037
0.040
0.043
0.94
1.01
Max
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
Dimensions — TO-263 (N-Package) — D2PAK Surface Mount
Dimension
Inches
Millimeters
Min
Max
Min
A
0.360
0.370
9.14
Max
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.64
0.89
E
0.045
0.060
1.14
1.52
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.092
0.102
2.34
2.59
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.88
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Dimension
O
A
E
8.13
.320
P
A
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
2.92
B
0.105
0.115
2.67
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
0.380
0.420
9.65
10.67
2.92
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
8.13
.320
A
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
CATHODE
ANODE GATE
K
J
N
M
Dimension
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
B
0.105
0.115
2.67
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
10 Amp Sensitive & Standard SCRs
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Sxx10L/RyyTP
Sxx10L/Ryy
2.2 g
Tube
1000 (50 per tube)
750 (75 per tube)
Sxx10DyyTP
Sxx10Dyy
0.3 g
Tube
Sxx10DyyRP
Sxx10Dyy
0.3 g
Embossed Carrier
2500
Sxx10VyyTP
Sxx10Vyy
0.4 g
Tube
750 (75 per tube)
Sxx10L/RTP
Sxx10L/R
2.2 g
Tube
1000 (50 per tube)
Sxx10DTP
Sxx10D
0.3 g
Tube
750 (75 per tube)
Sxx10DRP
Sxx10D
0.3 g
Embossed Carrier
2500
Sxx10VTP
Sxx10V
0.4 g
Tube
750 (75 per tube)
1000 (50 per tube)
Sxx10NSyTP
Sxx10NSy
1.6 g
Tube
Sxx10NSyRP
Sxx10NSy
1.6 g
Embossed Carrie
500
Sxx10NTP
Sxx10N
1.6 g
Tube
1000 (50 per tube)
Sxx10NRP
Sxx10N
1.6 g
Embossed Carrier
500
Note: xx = Voltage/10; yy = Sensitivity
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
* Cover tape
0.512 (13.0) Arbor
Hole Dia.
0.315
(8.0)
0.059
Dia
(1.5)
XXXXXX
Cathode
DC
XX
DC
XX
XXXXXX
*
DC
0.524
(13.3)
XX
0.63
(16.0)
XXXXXX
Gate
XXXXXX
0.157
(4.0)
Anode
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
Part Marking System
S 60 10 L S2 56
COMPONENT TYPE
S : SCR
LEAD FORM DIMENSIONS
xx : Lead Form Optio n
Sxx10DS3
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
CURRENT
10: 10A
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (VPAK)
D : TO-252 (DPAK)
N: TO-263 (D2PAK)
TO-263 AA - (N Package)
TO-220 AB - (L and R Package)
TO-251AA - (V Package)
TO-252AA - (D Package)
Sxx10DS3
Sxx10R
YMXXX
®
YMLDD
®
YMLDD
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20