SD15C-01FTG

TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series SD-C Series 450W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SD-C series can safely absorb repetitive ESD strikes at ±30kV (contact discharge, IEC 61000-4-2) without performance degradation and safely dissipate 30A (SD05C) of 8/20μs induced surge current (IEC 61000-4-5 2nd Edition) with very low clamping voltages. Features • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air • EFT, IEC 61000-4-4, 40A (5/50ns) Pinout and Functional Block Diagram • Lightning, 30A (8/20μs as defined in IEC 61000-4-5 2nd edition) SD05C • Low clamping voltage • Low leakage current • Small SOD323 package fits 0805 footprints • AEC-Q101 qualified • RoHS Compliant and Lead Free • Moisture Sensitivity Level 1 Applications • Switches / Buttons • Notebooks / Desktops / Servers • Test Equipment / Instrumentation • Computer Peripherals • Point-of-Sale Terminals • Automotive Electronics • Medical Equipment 2 Additional Information Datasheet Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 Resources Samples TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series Absolute Maximum Ratings Symbol Parameter Value Units 450 W Operating Temperature -40 to 125 °C Storage Temperature -55 to 150 °C Ppk Peak Pulse Power (tp=8/20μs) TOP TSTOR Note: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. SD05C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA - - 5.0 V Breakdown Voltage VBR IR=1mA 6.0 - - V Reverse Leakage Current ILEAK VR=5V - - 1.0 μA IPP=1A, tp=8/20µs, Fwd - - 10.0 V IPP=10A, tP=8/20μs, Fwd - - 14.5 V RDYN TLP, tp=100ns, I/O to Ground - 0.31 - Ω Ipp tp=8/20µs - - 30.0 A IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Reverse Bias=0V, f=1MHz - - 200 pF Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 VESD CI/O-I/O SD12C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA - - 12.0 V Breakdown Voltage VBR IR=1mA 13.3 - - V Reverse Leakage Current ILEAK VR=12V - - 1.0 μA IPP=1A, tp=8/20µs, Fwd - - 18.5 V IPP=10A, tP=8/20μs, Fwd - - 23.0 V TLP, tp=100ns, I/O to Ground - 0.41 - Ω Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 RDYN Ipp VESD CI/O-I/O ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 tp=8/20µs - - 17.0 A IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Reverse Bias=0V, f=1MHz - - 100 pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series SD15C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units VRWM IR=1μA - - 15.0 V Breakdown Voltage VBR IR=1mA 16.7 - - V Reverse Leakage Current ILEAK VR=15V - - 1.0 μA IPP=1A, tp=8/20µs, Fwd - - 24.0 V IPP=10A, tp=8/20µs, Fwd - - 31.0 V RDYN TLP, tp=100ns, I/O to Ground - 0.46 - Ω Ipp tp=8/20µs - - 12.0 A IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Reverse Bias=0V, f=1MHz - - 75 pF Reverse Standoff Voltage Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 VESD CI/O-I/O SD24C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA - - 24.0 V Breakdown Voltage VBR IR=1mA 26.7 - - V Reverse Leakage Current ILEAK Clamp Voltage1 VC Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 VR=24V - - 1.0 μA IPP=1A, tp=8/20µs, Fwd - - 34.0 V IPP=5A, tp=8/20µs, Fwd - - 42.0 V RDYN TLP, tp=100ns, I/O to Ground - 0.62 - Ω Ipp tp=8/20µs - - 7.0 A IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Reverse Bias=0V, f=1MHz - - 50 pF VESD CI/O-I/O SD36C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA - - 36.0 V Breakdown Voltage VBR IR=1mA 40.0 - Reverse Leakage Current ILEAK VC Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 V VR=36V - - 1.0 μA IPP=1A, tp=8/20µs, Fwd - - 50.0 V 60.0 IPP=4A, tp=8/20µs, Fwd - - RDYN TLP, tp=100ns, I/O to Ground - 0.68 Ipp tp=8/20µs - - IEC 61000-4-2 (Contact Discharge) ±30 - kV IEC 61000-4-2 (Air Discharge) ±30 - kV Reverse Bias=0V, f=1MHz - - VESD CI/O-I/O Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 V Ω 5.0 30 A pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series Capacitance vs. Bias 160 Capacitance (pF 140 120 SD05C 100 80 60 SD12C 40 SD15C SD24C 20 0 0 3 6 9 12 15 18 21 24 SD36C 27 30 33 36 Bias Voltage (V 8/20 µs Pulse Waveform 110 110% 100 100% 90 90% 80 80% 70 Percent of IPP % of Rated Power I PP Power Derating Curve 60 50 40 30 50% 40% 30% 20 20% 10 0 70% 60% 10% 0 25 50 75 100 125 150 (o 0% 0.0 5.0 10.0 Ambient Temperature - T A C) SD05C Transmission Line Pulsing(TLP) Plot 20.0 25.0 30.0 SD12C Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) 15.0 Time (μs) 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 10 TLP Voltage (V) ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 12 14 16 18 0 2 4 6 8 10 12 14 16 TLP Voltage (V) 18 20 22 24 26 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series SD24C Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) SD15C Transmission Line Pulsing(TLP) Plot 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 0 10 12 14 16 18 20 22 24 26 28 30 32 5 10 15 20 25 30 35 40 45 50 TLP Voltage (V) TLP Voltage (V) SD36C Transmission Line Pulsing(TLP) Plot 22 20 18 TLP Current (A) 16 14 12 10 8 6 4 2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 TLP Voltage (V) Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 tP TP Temperature Reflow Condition Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) 25 tS time to peak temperature Time TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series Product Characteristics Ordering Information Part Number Package Min. Order Qty. Copper Alloy SD05C-01FTG SOD323 3000 Lead Coplanarity 0.0004 inches (0.102mm) SD12C-01FTG SOD323 3000 Substrate material Silicon Body Material Molded Compound SD15C-01FTG SOD323 3000 UL Recognized compund meeting flammability rating V-0 SD24C-01FTG SOD323 3000 Flammability SD36C-01FTG SOD323 3000 Lead Plating Matte Tin Lead Material Part Marking System Part Numbering System SD** C – 01 F T G G* 2 TVS Diode Arrays (SPA® Diodes ) 1 G= Green Voltage T= Tape & Reel Bidirectional Package Number of Channels Blank: SD05C-01FTG 1: SD12C-01FTG 2: SD15C-01FTG 3: SD24C-01FTG 4: SD36C-01FTG F: SOD323 Package Dimensions -SOD323 E D Symbol A E1 L1 c Inches Max Min Max A 0.8 1.14 0.031 0.045 A1 0.00 0.10 0.000 0.004 A2 0.80 1.04 0.031 0.014 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1.15 1.45 0.045 0.057 E 1.60 1.90 0.063 0.075 1.79 E1 2.44 2.70 0.096 0.106 L1 0.25 0.45 0.010 0.018 1.14 2.28 2.77 Unit: mm ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 Millimeters Min Recommended Solder Pad 0.49 0.45 0.2 SOD323 A2 b A1 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD-C Series Embossed Carrier Tape & Reel Specification — SOD323 ø178 R2 12.3 5. 6 R7 8. 0 3000 2500 2000 1500 54.4 500 R6 5.6 .5 1000 R2 12.3 9.5 0.254 1.25 Access Hole, Ref. 2.90 1.46 Cover Tape A-A 14.4mm, Ref. B-B 13mm 180mm 60mm 8.4mm, Ref. ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19