SD24-01FTG

TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series SD Series 450W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The Unidirectional SD series is designed for use in electronic equipment for low speed and DC applications. It will protect any sensitive equipment from damage due to electrostatic discharge (ESD) and other transient events. The SD series can safely absorb repetitive ESD strikes at ±30kV (contact discharge, IEC 61000-4-2) without performance degradation and safely dissipate 30A (SD05) of 8/20μs induced surge current (IEC61000-4-5 2nd edition) with very low clamping voltages. Pinout and Functional Block Diagram Features • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air • EFT, IEC 61000-4-4, 40A (5/50ns) 1 • Lightning, 30A (8/20μs as defined in IEC 61000-4-5 2nd edition) SD05 • Low clamping voltage • Switches / Buttons • Test Equipment / Instrumentation • Point-of-Sale Terminals Additional Information Resources • Medical Equipment Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 • Small SOD323 package fits 0805 footprints • AEC-Q101 qualified • RoHS Compliant and Lead Free • Moisture Sensitivity Level Applications 2 Datasheet • Low leakage current • Notebooks / Desktops / Servers • Computer Peripherals • Automotive Electronics TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series Absolute Maximum Ratings Symbol Parameter Value Units 450 W Operating Temperature -40 to 125 °C Storage Temperature -55 to 150 °C Ppk Peak Pulse Power (tp=8/20μs) TOP TSTOR Note: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. SD05 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VBR IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=5V 1.0 μA IPP=1A, tp=8/20µs, Fwd 9.8 V IPP=10A, tP=8/20μs, Fwd 13.0 V Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 RDYN TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs VESD CI/O-GND Min Typ Max Units 5.0 V 6.0 V 0.22 Ω 30.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 350 pF Max Units 12.0 V SD12 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=12V Clamp Voltage1 VC Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 V IPP=1A, tp=8/20µs, Fwd 18.5 V IPP=10A, tP=8/20μs, Fwd 22.5 V Ipp tp=8/20µs ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 13.3 μA TLP, tp=100ns, I/O to Ground CI/O-GND Typ 1.0 RDYN VESD Min 0.29 Ω 17.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 150 pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series SD15 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 VC Max Units 15.0 V 16.7 V VR=15V 1.0 μA 24.0 V IPP=10A, tp=8/20µs, Fwd TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs CI/O-GND Typ IPP=1A, tp=8/20µs, Fwd RDYN VESD Min 30.0 0.34 V Ω 12.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 100 pF Max Units 24.0 V SD24 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 VC 26.7 V VR=24V 1.0 μA 36.0 V IPP=5A, tp=8/20µs, Fwd TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs CI/O-GND Typ IPP=1A, tp=8/20µs, Fwd RDYN VESD Min 42.0 0.49 7.0 IEC 61000-4-2 (Contact Discharge) ±30 IEC 61000-4-2 (Air Discharge) ±30 V Ω A kV kV Reverse Bias=0V, f=1MHz 65 pF Max Units 36.0 V SD36 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 VC V 1.0 μA 52.0 V IPP=4A, tp=8/20µs, Fwd Ipp tp=8/20µs 62.0 0.61 ±30 IEC 61000-4-2 (Air Discharge) ±30 Reverse Bias=0V, f=1MHz 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. V Ω 5.0 IEC 61000-4-2 (Contact Discharge) Note: ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 40.0 VR=36V TLP, tp=100ns, I/O to Ground CI/O-GND Typ IPP=1A, tp=8/20µs, Fwd RDYN VESD Min A kV kV 50 pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series Non-Repetitive Peak Pulse Power vs. Pulse Time Capacitance vs. Bias 160 10 Capacitance (pF) Peak Pulse Power - P pk (kW) 140 1 0.1 120 SD05 100 80 60 SD12 40 SD15 20 0.01 0.1 1 10 100 3 6 9 12 15 18 21 24 27 30 33 36 8/20 µs Pulse Waveform 110 110% 100 100% 90 90% 80 80% Percent of IPP 70 60 50 40 30 70% 60% 50% 40% 30% 20 20% 10 0 0 SD36 SD36C Bias Voltage (V) Power Derating Curve % of Rated Power I PP 0 1000 Pulse Duration - t p (µs) SD24 SD24C 10% 0 25 50 75 100 125 150 Ambient Temperature - T A (oC) 0.0 5.0 10.0 15.0 20.0 25.0 30.0 Time (μs) SD05 Transmission Line Pulsing(TLP) Plot SD12 Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) 0% 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 TLP Voltage (V) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 10 12 14 0 2 4 6 8 10 12 14 TLP Voltage (V) 16 18 20 22 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series SD24 Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) SD15 Transmission Line Pulsing(TLP) Plot 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 0 28 5 10 15 20 25 30 35 40 TLP Voltage (V) TLP Voltage (V) SD36 Transmission Line Pulsing(TLP) Plot 22 20 18 TLP Current (A) 16 14 12 10 8 6 4 2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 TLP Voltage (V) Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 tP TP Temperature Reflow Condition TL TS(max) tL Preheat TS(min) 25 Critical Zone TL to TP Ramp-up Ramp-do Ramp-down tS Time to Peak Temperature Time TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series Product Characteristics Ordering Information Lead Plating Matte Tin Part Number Package Min. Order Qty. Lead Material Copper Alloy SD05-01FTG SOD323 3000 Lead Coplanarity 0.0004 inches (0.102mm) SD12-01FTG SOD323 3000 Substrate material Silicon SD15-01FTG SOD323 3000 Body Material Molded Compound SD24-01FTG SOD323 3000 Flammability UL Recognized compound meeting flammability rating V-0 SD36-01FTG SOD323 3000 Part Marking System Part Numbering System SD** – 01 F T G g* Pin 2 G= Green Pin 1 TVS Diode Arrays (SPA® Diodes ) T= Tape & Reel Voltage Number of Channels Blank: SD05-01FTG 1: SD12-01FTG 2: SD15-01FTG 3: SD24-01FTG 4: SD36-01FTG Package F: SOD323 Package Dimensions -SOD323 E D Symbol A E1 L1 c Inches Min Max Min Max A 0.8 1.14 0.031 0.045 A1 0.00 0.10 0.000 0.004 A2 0.80 1.04 0.031 0.014 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1.15 1.45 0.045 0.057 E 1.60 1.90 0.063 0.075 1.79 E1 2.44 2.70 0.096 0.106 L1 0.25 0.45 0.010 0.018 1.14 2.28 2.77 Unit: mm ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 Millimeters Recommended Solder Pad 0.49 0.45 0.2 SOD323 A2 b A1 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - SD Series Embossed Carrier Tape & Reel Specification — SOD323 Symbol ,Ref. ,Ref. Component Orientation in Tape ,Ref. Pin1 ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 8mm TAPE AND REEL Millimeters A0 1.46+/-0.10 B0 2.90+/-0.10 W 8.0+0.3/-0.10 D0 1.50+0.10 D1 0.45min/1.15max E1 1.75+/-0.10 E2 - F 3.50+/-0.10 P0 4.00+/-0.10 P 4.00+/-0.10 P1 2.00+/-0.05 K0 1.25+/-0.10 T 0.254+/-0.02