SDP0640Q38CB

SIDACtor ® Protection Thyristors Broadband Optimized™ Protection SDP Biased Series - 5x6 QFN SDP Biased Series Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, ADSL2, and "%4-
XJUI
NJOJNBM
FGGFDU
PO
EBUB
TJHOBMT

5IJT
MBUFTU
silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount QFN package provides a surge capability that exceeds most worldwide standards and recommendations for lightning surge withstand capability of secondary protectors. Features & Benefits Agency Approvals Agency t

$PNQBUJCMF
XJUI
7%4-
(30MHz) Agency File Number E133083 t

-PX
JOTFSUJPO
MPTT
t

-PX
QSPmMF t

#BMBODFE
PWFSWPMUBHF
protection t

40
GPPUQSJOU
DPNQBUJCMF

t

-PX
EJTUPSUJPO
t

'BJMT
TIPSU
DJSDVJU
XIFO
surged in excess of ratings Pinout Designation Tip in 1 - Bias Ground Ring in 4 8 Tip out 2 7 3 6 + Bias Ground 5 Ring out Applicable Global Standards t

5*"" t

(3

*OUFSCVJMEJOH t

*56
,
&OIBODFE
Level t
(3

*OUSBCVJMEJOH t


*56
,
#BTJD
-FWFM Schematic Symbol t

*&$
 Line In (1) t

:%5
 t
:%5
 t
:%5
 (8) Line Out -Bias (2) (7) +Bias Ground (3) (6) Ground Line In (4) (5) Line Out 8002 tcO snevaH pillihP Electrical Characteristics Part Number SDP0080Q38CB SDP0640Q38CB SDP0720Q38CB SDP0900Q38CB SDP1100Q38CB SDP1300Q38CB SDP1800Q38CB SDP2600Q38CB SDP3100Q38CB SDP3500Q38CB Marking SDP-8C SDP06C SDP07C SDP09C SDP11C SDP13C SDP18C SDP26C SDP31C SDP35C VDRM@IDRM=5μA VS@100V/μs IH IS IT VT@IT=2.2 Amps V min V max mA min mA max A max V max 6 58 65 75 90 120 170 220 275 320 25 77 88 98 130 160 220 300 350 400 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 8 8 8 8 Capacitance See Capacitance vs Voltage Chart Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). 30 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SIDACtor ® Protection Thyristors Broadband Optimized™ Protection V-I: Characteristics Capacitance vs. Voltage* +I 40 Bias Voltage 35 IT 0V 5V 24V 50V 30 Capacitance (pF) IDRM -V +V 25 20 15 VDRM VT 10 VS 5 0 0.1 1 10 Line Voltage (V) -I * Bias voltage must be lower than VDRM 50/60Hz Ratings Parameter Name Test Conditions Value Units ITSM Maximum non-reptitive on-state current, 50/60Hz 0.5s 1s 2s 5s 30s 900s 6.5 4.6 3.4 2.3 1.3 0.73 A Surge Ratings ITSM IPP Series C 2x10μs 1.2x50μs/8x20μs 10x700/5x310μs 10x1000μs 600VRMS 1 cycle A min A min A min A min ARMS 500 400 200 100 30 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP
SBUJOHT
BQQMJDBCMF
PWFS
UFNQFSBUVSF
SBOHF
PG
$
UP
$ - The device must initially be in thermal equilibrium with -40°C < TJ