物料型号:SE-704 系列(PGR-4704)
器件简介:SE-704 是一种基于微处理器的接地故障继电器,适用于电阻接地和直接接地系统。它能提供非常敏感的接地故障检测,低至 10 mA,并且可以用于有显著谐波含量的系统。
引脚分配:文档中未明确提供引脚分配信息。
参数特性:
- 可调取值(10 mA-5A)
- 可调时间延迟(30 ms-2.0 s)
- 输出接点:形式 A 和形式 B 的接地故障输出接点
- 模拟输出(0-5V & 0-1 mA)
- CT-Loop 监控:当 CT 未连接时发出警报
- 可选择的接点操作模式:可选择故障安全或非故障安全操作模式
- 谐波滤波:消除误动作
- 非易失性故障记忆:断电后保留故障状态,简化故障排除
- 基于微处理器:无需校准,节省维护成本
- 通用电源供应:允许在任一侧 PT 发生故障的应用中操作,为多种应用提供灵活性
功能详解:SE-704 提供馈线级保护或单个负载保护。输出接点可以连接用于保护跳闸电路或报警指示电路。模拟输出可以与 PLC 或仪表一起使用。
应用信息:适用于需要低级别接地故障检测的系统,包括那些有谐波问题的环境。
封装信息:尺寸为高 75 mm (3.0"),宽 55 mm (2.2"),深 115 mm (4.5")。DIN、表面安装(标准)或面板安装(使用 PMA-55 或 PMA-60 适配器)。
配件信息:
- SE-CS30 系列:必需的零序电流互感器,专为低级别检测设计。
- PGA-0500:可选的面板安装模拟百分比电流表,显示接地故障电流作为设定点的百分比或 5 A。
- PMA-55, PMA-60:可选配件。
订购信息:
- SE-704-0U:控制电源 120/240Vac/Vdc
- SE-704-0D:控制电源 12/24Vdc
- SE-704-0T:控制电源 48Vdc
- SE-704-03:控制电源 24Vac