Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
SJxx06xSx & SJxx06xx Series
RoHS
Description
This SJxx06xx high temperature SCR series is ideal for
uni-directional switch applications such as phase control,
heating, motor speed controls, converters/rectifiers and
capacitive discharge ignitions.
These SCRs have a low gate current trigger level of 6mA
or 15mA maximum at approximately 1.5V, with a sensitive
version of this series having a gate trigger current less than
200µA.
Features & Benefits
Main Features
Symbol
IT(RMS)
VDRM /VRRM
IGT
Value
Unit
6
A
400 or 600
V
0.2 to 15
mA
Schematic Symbol
A
• Voltage capability up
to 600V
• 150°C maximum junction
temperature
• Surge capability up
to 100A at 60Hz half cycle
• Halogen free and RoHS
compliant
Applications
Typical applications includes capacitive discharge system
for motorcycle engine CDI, portable generator engine
ignition, strobe lights and nailers, as well as generic
rectifiers, battery voltage regulators and converters. Also
controls for power tools, home/brown goods and white
goods appliances.
K
G
SJxx06xSx & SJxx06xx Series
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/08/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Parameter
Test Conditions
Value
Unit
IT(RMS)
Symbol
RMS on-state current
TC = 120°C
6
A
IT(AV)
Average on-state current
TC = 120°C
3.84
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
ITSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
tp = 8.3ms
41
A2s
Critical rate of rise of on-state current
f = 60Hz, TJ = 150°C
70
A/μs
Peak gate current
Pw=20μs, TJ = 150°C
0.5
A
Average gate power dissipation
TJ = 150 °C
0.1
W
-40 to 150
°C
di/dt
IGM
PG(AV)
Storage temperature range
Tstg
TJ
-40 to 150
°C
Pw=100μs
VDRM/VRRM+100
V
Parameter
Test Conditions
Value
Unit
IT(RMS)
RMS on-state current
TC = 125°C
6
A
IT(AV)
Average on-state current
TC = 125°C
3.84
A
ITSM
Peak non-repetitive surge current
single half cycle; f = 50Hz;
TJ (initial) = 25°C
single half cycle; f = 60Hz;
TJ (initial) = 25°C
I2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate-of-rise of on-state current
f = 60Hz TJ = 150°C
100
A/μs
Peak gate current
Pw=20μs, TJ = 150°C
0.5
A
Average gate power dissipation
TJ = 150°C
0.1
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 150
°C
VDRM/VRRM+100
V
VDSM/VRSM
Operating junction temperature range
A
Peak non-repetitive blocking voltage
Absolute Maximum Ratings — Standard SCRs
Symbol
di/dt
IGM
PG(AV)
Tstg
TJ
VDSM/VRSM
Peak non-repetitive blocking voltage
Pw=100μs
83
A
100
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
IGT
VGT
dv/dt
VGD
Value
Test Conditions
VD = 6V, RL = 100Ω
VD = VDRM; RGK = 220Ω ; TJ = 125°C
SJxx06xS2
Unit
MIN.
20
μA
MAX.
200
μA
MAX.
0.8
V
MIN.
15
V/μs
VD = VDRM; RL = 3.3kΩ; TJ = 125°C
MIN.
0.2
V
VD = VDRM; RL = 3.3kΩ; TJ = 150°C
MIN.
0.1
V
VGRM
IGR = 10μA
MIN.
6
V
IH
IT = 20mA (initial)
MAX.
6
mA
MAX.
130
μs
TYP.
6
μs
tq
tgt
tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT; PW = 15µs; IT = 8A
NOTE: xx = voltage
SJxx06xSx & SJxx06xx Series
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Symbol
Value
Test Conditions
IGT
SJxx06x1
VD = 12V RL = 60Ω
VGT
VD = VDRM; gate open; TJ = 125°C
dv/dt
VGD
IH
Unit
MAX.
6
15
mA
MAX.
1.5
1.5
V
100
200
50
120
MIN.
VD = VDRM; gate open; TJ = 150°C
SJxx06x
VD = VDRM; RL = 3.3kΩ; TJ = 125°C
MIN.
0.2
0.2
VD = VDRM; RL = 3.3kΩ; TJ = 150°C
MIN.
0.1
0.1
V/μs
V
IT = 200mA (initial)
MAX.
20
30
mA
tq
IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
30
35
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 8A
TYP.
0.5
2
μs
Value
Unit
1.6
V
NOTE: xx = voltage
Static Characteristics
Symbol
Test Conditions
IT = 12A; tp = 380 µs
VTM
SJxx06xS2
IDRM / IRRM
@ VDRM / VRRM
MAX.
TJ = 25°C
400 - 600V
5
TJ = 125°C, RGK = 220Ω
400 - 600V
1000
TJ = 150°C, RGK = 220Ω
400 - 600V
TJ = 25°C
400 - 600V
TJ = 125°C
400 - 600V
1000
TJ = 150°C
400 - 600V
3000
SJxx06xx
3000
MAX.
μA
10
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Rθ(J-C)
Value
SJxx06xS2
1.2
SJxx06xx
1.2
Unit
°C/W
Note: xx = voltage
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: N
ormalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
1.8
1.6
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
1.8
RGK=1K
1.4
1.2
1
RGK=220Ω
0.8
0.6
1.6
1.4
1.2
1
0.8
0.6
0.4
0.4
0.2
0.2
0
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (°C)
SJxx06xSx & SJxx06xx Series
135 150
0
-40
-15
10
35
60
85
110
135 150
Junction Temperature (TJ) -- (°C)
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 08/02/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: N
ormalized DC Holding Current
vs. Junction Temperature
2.5
SJxx08xS2
SJxx06xS2
1.2
Ratio of I H / I H (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
1.4
1
SJxx08xx
SJxx06xx
0.8
0.6
0.4
SJxx06xS2
SJxx08xS2
2
1.5
1
SJxx06xx
SJxx08xx
0.5
0.2
0
0
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (°C)
135 150
Average On-State Power Dissipation
[P D(AV)] - (Watts)
Intantaneous On-state Current (IT ) – Amps
30
SJxx08xx
SJxx06xx
20
SJxx08DS2
SJxx06xS2
10
5
0
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
0
0
Maximum Allowable
Case Temperature (TC )- °C
Maximum Allowable
Case Temperature (TC )- °C
130
SJxx06xS2
110
100
90
RMS On-State Current [IT
SJxx06xSx & SJxx06xx Series
4
(RMS)]
5
- (Amps)
4
6
Figure 8: M
aximum Allowable Case Temperature
vs. Average On-State Current
SJxx06xx
3
2
RMS On-State Current [I T(RMS)] - (Amps)
150
2
135 150
SJxx06xx
150
1
110
2
160
0
85
SJxx06xS2
160
80
60
4
1.7
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
120
35
6
Instantaneous On-state Voltage (VT ) – Volts
140
10
Figure 6: P
ower Dissipation (Typical) vs. RMS
On-State Current
35
15
-15
Junction Temperature (TJ) -- (°C)
Figure 5: On-State Current vs. On-State
Voltage (Typical)
25
-40
6
SJxx06xx
140
130
SJxx06xS2
120
110
100
90
80
0
1
2
3
4
Average On -State Current [AV ] - (Amps)
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 9: Peak Capacitor Discharge Current
Peak Discharge Current (ITM) - Amps
1000
100
ITRM
tW
10
0.5
10.0
1.0
50.0
Pulse Current Duration (tW) - ms
Figure 10: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
Figure 11: Typical DC Gate Trigger Current with RGK vs.
Junction Temperature (Sensitive SCR)
Figure 12: Typical DC Holding Current with RGK vs.
Junction Temperature (Sensitive SCR)
10
RGK=100Ω
10
RGK=220Ω
RGK=100Ω
RGK=470Ω
1
RGK=1KΩ
0.1
0.01
IH (mA)
IGT (mA)
RGK=220Ω
RGK=470Ω
1
No RGK
-40
-20
0
20
40
60
No RGK
80
100 120 140
Junction Temperature (T ) -- (°C)
SJxx06xSx & SJxx06xx Series
0.1
-40
-20
0
20
40
60
RGK=1KΩ
80
100 120 140
Junction Temperature (T ) -- (°C)
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 13: Typical Static dv/dt with RGK vs. Junction
Temperature (Sensitive SCR)
10000
Static dv/dt (V/μs)
1000
RGK=100Ω
RGK=220Ω
100
RGK=470Ω
10
1
RGK=1KΩ
25
45
65
85
105
Junction Temperature (T ) -- (°C)
125
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Time (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
SJxx06xSx & SJxx06xx Series
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Physical Specifications
Terminal Finish
Environmental Specifications
Test
100% Matte Tin-plated
Specifications and Conditions
Body Material
UL Recognized epoxy meeting
flammability rating V-0
AC Blocking
Lead Material
Copper Alloy
Temperature Cycling
Temperature/
Humidity
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 160V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
Design Considerations
High Temp Storage
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
Moisture Sensitivity
Level
Level 1, JEDEC-J-STD-020
Product Selector
Part Number
Voltage
Gate Sensitivity
Type
Package
X
0.2mA
Sensitive SCR
TO-251
X
0.2mA
Sensitive SCR
TO-252
X
X
15mA
Standard SCR
TO-251
X
X
15mA
Standard SCR
TO-252
SJxx06V1
X
X
6mA
Standard SCR
TO-251
SJxx06D1
X
X
6mA
Standard SCR
TO-252
400V
600V
SJxx06VS2
X
SJxx06DS2
X
SJxx06V
SJxx06D
Note: xx = Voltage
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
SJxx06DS2TP
SJxx06DS2
0.3 g
Tube
750 (75 per tube)
SJxx06DS2RP
SJxx06DS2
0.3 g
Embossed Carrier
2500
SJxx06VS2TP
SJxx06VS2
0.4 g
Tube
750 (75 per tube)
SJxx06DTP
SJxx06D
0.3 g
Tube
750 (75 per tube)
SJxx06DRP
SJxx06D
0.3 g
Embossed Carrier
2500
SJxx06VTP
SJxx06V
0.4 g
Tube
750 (75 per tube)
SJxx06D1TP
SJxx06D1
0.3 g
Tube
750 (75 per tube)
SJxx06D1RP
SJxx06D1
0.3 g
Embossed Carrier
2500
SJxx06V1TP
SJxx06V1
0.4 g
Tube
750 (75 per tube)
Note: xx = Voltage
SJxx06xSx & SJxx06xx Series
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
E
Anode
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
L
F
Anode
GATE
G
I
Inches
Min
Typ
Millimeters
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
6.71
.264
B
C
P
Q
Cathode
GATE
F
Anode
1.60
.063
1.80
.071
AREA : 0.040 IN
2
3
.118
G
I
O
L
K
M
N
SJxx06xSx & SJxx06xx Series
J
H
4.60
.181
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
A
5.34
.210
Inches
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
* Cover tape
0.512 (13.0) Arbor
Hole Dia.
0.315
(8.0)
0.059
Dia
(1.5)
Cathode
XXXXXX
XXXXXX
*
DC
0.524
(13.3)
DC
0.63
(16.0)
XXXXXX
Gate
XXXXXX
0.157
(4.0)
DC
Meets all EIA-481-2 Standards
Anode
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
Part Marking System
SJ 60 06 D S2
COMPONENT TYPE
SJ : SCR
VOLTAGE RATING
40 : 400V
60 : 600V
CURRENT
06: 6A
SENSITIVITY & TYPE
Sensitive SCR:
S2: 0.2mA
Standard SCR:
1: 6mA
(blank): 15mA
PACKAGE TYPE
V : TO-251 (VPAK)
D : TO-252 (DPAK)
SJxx06DS2
YMLDD
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics.
SJxx06xSx & SJxx06xx Series
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 07/31/17
很抱歉,暂时无法提供与“SJ6006V1TP”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+7.12574
- 10+6.15580
- 100+5.62706
- 250+5.43710
- 500+5.20949
- 750+5.12195