SJ6012DRP

Thyristors 12 Amp High Junction Temperature SCRs SJxx12xx series RoHS Description This SJxx12xx high junction temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/ rectifiers, inrush current control and capacitive discharge ignitions. These SCRs have a low gate current trigger level of 6mA, 10mA or 20mA maximum at approximately 1.5V. Features & Benefits • Halogen free and RoHS compliant • 150°C maximum junction temperature Agency Approval Agency • Surge capability up to 120 A at 60 Hz half cycle Applications Agency File Number L Packages: E71639 Schematic Symbol Typical applications include AC Generator (ACG) rectifiers, battery voltage regulators and generic converters and inrush current controller in various AC to DC applications. Additional applications include controls for power tools, home/brown good and white goods appliances. Isolated packages offered for ease of heat sinking. A K G Main Features Symbol IT(RMS) VDRM /VRRM IGT SJxx12xx SJxx12xxSeries Series Value Unit 12 A 400 or 600 V 6 to 20 mA ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs Absolute Maximum Ratings Symbol VDSM/VRSM Parameter Test Conditions Value Unit Peak non-repetitive blocking voltage Pw=100 μs VDRM/VRRM+100 V 12 A 7.6 A RMS on-state current IT(RMS) Average on-state current IT(AV) SJxx12Lx TC = 110°C SJxx12Rx SJxx12Nx TC = 135°C SJxx12Dx SJxx12Vx TC = 125°C SJxx12Lx TC = 110°C SJxx12Rx SJxx12Ny TC = 135°C SJxx12Dx SJxx12Vx TC = 125°C ITSM Peak non-repetitive surge current (single half cycle, TJ (initial) = 25°C) f = 50Hz 100 f = 60Hz 120 I2t I2t Value for fusing tp = 8.3 ms 60 A2s di/dt Critical rate of rise of on-state current f = 60Hz; TJ = 150°C 100 A/μs Peak gate current TJ = 150°C 2 A Average gate power dissipation TJ = 150°C 0.5 W IGM PG(AV) Storage temperature range -40 to 150 Operating junction temperature range -40 to 150 Tstg TJ A °C Note: xx=voltage/10, x=sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) - TO-220L ,TO-220R and TO-263 package Symbol Test Conditions IGT VD = 12V RL = 60 Ω VGT VD = 12V RL = 60 Ω dv/dt VD = 67% VDRM; gate open; TJ = 125°C VD = 67% VDRM; gate open; TJ = 150°C SJxx12x SJxx12x1 SJxx12x2 MAX. 20 6 10 MIN. 8 2 5 MAX. 1.5 1.5 1.5 MIN. 800 70 500 400 - 200 Unit mA V V/μs VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C MIN. 0.2 0.2 0.2 V IH IT = 200mA (initial) MAX. 60 15 35 mA tq IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs MAX. 40 40 40 μs tgt IG = 2 x IGT PW = 15µs IT = 24A TYP. 2 2 2 μs Note: xx=voltage/10, x=package SJxx12xx Series SJxx12xx Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) - TO-251 and TO-252 package Symbol Value Test Conditions IGT SJxx12x1 SJxx12x MAX. 6 20 MIN. 2 5 MAX. 1.5 1.5 400V 100 250 600V 75 225 50 200 10 175 VD = 12V RL = 60 Ω VGT VD = VDRM; gate open; TJ = 125°C dv/dt MIN. 400V VD = VDRM; gate open; TJ = 150°C 600V Unit mA V V/μs VD = VDRM RL = 3.3 kΩ TJ = 125°C MIN. 0.2 0.2 VD = VDRM RL = 3.3 kΩ TJ = 150°C MIN. 0.1 0.1 IH IT = 200mA (initial) MAX. 20 40 mA tq IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs MAX. 35 35 μs tgt IG = 2 x IGT PW = 15µs IT = 12A TYP. 0.5 2 μs VGD V Note: xx=voltage/10, x=package Static Characteristics Symbol Test Conditions VTM Component IT = 24A; tp = 380 µs MAX. TJ = 25°C IDRM / IRRM Unit 1.6 V 10 TJ = 125°C VDRM = VRRM Value MAX. μA 500 TJ = 150°C 2000 Thermal Resistances Symbol Parameter Value Junction to case (AC) Rθ(JC) SJxx12Lx 2.4 SJxx12Rx SJxx12Nx 1.1 SJxx12Dx SJxx12Vx 1.4 Unit °C/W Note: xx=voltage/10, x=sensitivity Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Voltage vs. Junction Temperature 1.8 2.0 Ratio of VGT / VGT (TJ = 25ºC) Ratio of IGT / IGT (TJ = 25°C) 1.6 SJxx12Lx SJxx12Rx SJxx12Nx 1.6 1.2 SJxx16Dx SJxx12Dx SJxx16Vx SJxx12Vx 0.8 0.4 1.4 SJxx12Dx SJxx12Vx 1.2 1.0 SJxx12Lx SJxx12Rx SJxx12Nx 0.8 0.6 0.4 0.2 0.0 -40 -15 10 35 60 85 Junction Temperature (TJ) -- (ºC) SJxx12xx Series SJxx12xx Series 110 135 150 0.0 -40 -15 10 35 60 85 110 135 150 Junction Temperature (TJ) -- (°C) ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: O  n-State Current vs. On-State Voltage (Typical) SJxx12Lx SJxx12Rx SJxx12Nx Ratio of IH / IH (TJ = 25°C) 1.6 1.2 SJxx12Dx SJxx12Vx 0.8 0.4 0.0 -40 -15 10 40 Instantaneous On-state Current (I T) – Amps 2.0 35 60 85 110 135 35 SJxx12Dx SJxx12Vx 30 25 20 15 SJxx12Lx SJxx12Rx SJxx12Nx 10 5 0 150 0.6 0.7 0.8 Junction Temperature (TJ) -- (°C) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Instantaneous On-state Voltage (vT) – Volts Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current 15 150 Maximum Allowable Case Temperature (TC)- °C Average On-State Power Dissipation [PD(AV)] - (Watts) 9 6 130 SJxx12Dx SJxx12Vx 110 100 3 90 80 0 2 4 6 8 10 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 0 2 RMS On-State Current [I T(RMS)] - (Amps) 4 6 8 10 12 14 RMS On-State Current [IT(RMS)] - Amps 12 Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: P  eak Capacitor Discharge Current SJxx12Rx SJxx12Nx 140 130 120 SJxx12Lx SJxx12Dx SJxx12Vx 110 100 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 90 0 1 2 3 SJxx16Dx SJxx16Vx 4 5 6 Average On-State Current [IT(AVE)] - Amps 7 Peak Discharge Current (ITM) - Amps 1000 150 Maximum Allowable Case Temperature (TC) - °C SJxx12Lx 120 0 80 SJxx12Rx SJxx12Nx 140 12 100 ITRM 8 tW 10 05 . 5 .0 25.0 50.0 Pulse Current Duration (tw) - ms SJxx12xx Series SJxx12xx Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 Amps Amp High HighJunction JunctionTemperature TemperatureSCRs SCRs Figure 9: Peak Capacitor Discharge Current Derating 1.2 Normalized Peak Current 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (TC) - ºC Figure 10: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM ) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature 100 Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 10 0 Surge Current Duration - Full Cycles 10 0 0 Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C SJxx12xx Series SJxx12xx Series tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 Amps HighJunction JunctionTemperature TemperatureSCRs SCRs Amp High Physical Specifications Environmental Specifications Test 100% Matte Tin-plated Terminal Finish Specifications and Conditions Body Material UL recognized compound meeting flammability rating V-0. AC Blocking Lead Material Copper Alloy Temperature Cycling Temperature/ Humidity MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -55°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Design Considerations High Temp Storage Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Moisture Sensitivity Level Level 1, JEDEC-J-STD-020D Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J SJxx12xx Series SJxx12xx Series N M Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE N K Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.02 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 Dimensions — TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE 8.41 .331 7.01 .276 A S W U K GATE CATHODE G H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 J 1.40 .055 8.13 .320 A B C D E F G H J K S V U W Inches Millimeters 3.81 .150 2.03 .080 6.60 .260 SJxx12xx Series SJxx12xx Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 Amps Amp High 12 HighJunction JunctionTemperature TemperatureSCRs SCRs Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole TC MEASURING POINT E Anode H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C Cathode L F Anode GATE G I Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 1.27 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.01 1.12 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 Max Min Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Anode E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension A 6.71 .264 5.34 .210 B 1.60 .063 P Q C 1.80 .071 GATE F Cathode Anode AREA : 0.040 IN2 3 .118 G I O L K M N SJxx12xx Series SJxx12xx Series J H 4.60 .181 Inches Min Typ Millimeters Typ Max A 0.040 0.043 0.050 1.02 1.09 1.27 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.02 1.12 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs Product Selector Voltage Part Number SJxx12L Gate Sensitivity Type Package X 20mA Standard SCR TO-220L 400V 600V X SJxx12R X X 20mA Standard SCR TO-220R SJxx12N X X 20mA Standard SCR TO-263 SJxx12V X X 20mA Standard SCR TO-251 SJxx12D X X 20mA Standard SCR TO-252 SJxx12L1 X X 6mA Standard SCR TO-220L SJxx12R1 X X 6mA Standard SCR TO-220R SJxx12N1 X X 6mA Standard SCR TO-263 SJxx12V1 X X 6mA Standard SCR TO-251 SJxx12D1 X X 6mA Standard SCR TO-252 SJxx12L2 X X 10mA Standard SCR TO-220L SJxx12R2 X X 10mA Standard SCR TO-220R SJxx12N2 X X 10mA Standard SCR TO-263 Note: xx = Voltage/10 Packing Options Part Number Marking Weight Packing Mode Base Quantity SJxx12LxTP SJxx12Ly 2.2g Tube 500 (50 per tube) SJxx12RxTP SJxx12Ry 2.2g Tube 500 (50 per tube) SJxx12NxTP SJxx12Ny 1.6g Tube 500 (50 per tube) SJxx12NxRP SJxx12Ny 1.6g Embossed Carrier 500 SJxx12DxTP SJxx12Dx 0.3 g Tube 750 (75 per tube) SJxx12DxRP SJxx12Dx 0.3 g Embossed Carrier 2500 SJxx12VxTP SJxx12Vx 0.4 g Tube 750 (75 per tube) Note: xx=voltage/10, x=sensitivity Part Numbering System Part Marking System TO-220 AB - (L and R Package) TO-263 AB - (N Package) SJ 60 12 R 1 TP COMPONENT TYPE SJ: high temperature SCR VOLTAGE RATING 40: 400V 60: 600V CURRENT RATING 12: 12A PACKING TYPE TP: Tube Pack RP: Reel Pack SENSITIVITY & TYPE [bank]:20mA 1: 6mA 2:10mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D2-Pak) V: TO-251 (V/I-Pak) D: TO-252 (D-Pak) SJ6012V Sxx16R SJ6012L1 YM ® YMLDD ® Date Code Marking Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code SJxx12xx Series SJxx12xx Series TO-251 (V/I-Pak) TO-252 (D-Pak) Y:Year Code M: Month Code L: Location Code DD: Calendar Code ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18 Thyristors 12 12 Amp AmpsHigh HighJunction JunctionTemperature TemperatureSCRs SCRs TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards * Cover tape 0.512 (13.0) Arbor Hole Dia. 0.315 (8.0) Cathode XXXXXX 0.059 Dia (1.5) XXXXXX XXXXXX * DC 0.524 (13.3) DC 0.63 (16.0) XXXXXX Gate DC 0.157 (4.0) Anode 12.99 (330.0) Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. SJxx12xx SJxx12xxSeries Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/10/18