SJ6020NRP

Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs SJxx20xx Series RoHS Description This SJxx20xx high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and inrush current controllers. These SCRs have a low gate current trigger level of 6 mA,10 mA or 35 mA maximum at approximately 1.5 V. Features & Benefits • Halogen free and RoHS compliant • Surge capability up to 300A at 60 Hz half cycle • 150 °C maximum junction temperature Schematic Symbol Applications A K G Typical applications include AC Generator (ACG) rectifiers, battery voltage regulators, generic converters and inrush current controller in various AC to DC applications. Additional applications include controls for power tools, home/brown good and white goods appliances. Isolated packages offered for ease of heat sinking. Agency Approval Main Features Agency Symbol Value Unit 20 A VDRM / VRRM 400 or 600 V IGT 6, 10, to 35 mA Agency File Number L Packages: E71639 IT(RMS) Absolute Maximum Ratings — 20A SCR Symbol Parameter Test Conditions Value Unit VDSM/VRSM Peak non-repetitive blocking voltage Pw=100 μs VDRM/VRRM+100 V SJxx20Lx IT(RMS) RMS on-state current TC = 105 °C SJxx20Rx SJxx20Nx TC = 130 °C 20 A SJxx20Lx IT(AV) Average on-state current TC = 105 °C SJxx20Rx SJxx20Nx TC = 130 °C 12.8 A single half cycle; f = 50Hz; TJ (initial) = 25 °C 225 single half cycle; f = 60Hz; TJ (initial) = 25 °C 300 A ITSM Peak non-repetitive surge current I 2t I2t Value for fusing tp = 8.3 ms 374 A2s di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 150 °C 125 A/μs IGM Peak gate current TJ = 150 °C 3 A PG(AV) Average gate power dissipation TJ = 150 °C 0.6 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 150 °C Note: xx=voltage/10, x=sensitivity SJxx20xx Sxx20x &Series Sxx25x Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions IGT VD = 12V; RL = 60 Ω VGT SJxx20x SJxx20x1 SJxx20x2 MIN. 8 2 5 MAX. 35 6 10 MAX. VD = 67%VDRM; gate open; TJ = 125°C dv/dt MIN. VD = 67% VDRM; gate open; TJ = 150°C Unit mA 1.5 1.5 1.5 800 70 500 400 - 200 0.2 0.2 V VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V V/μs IH IT = 200mA (initial) MAX. 75 15 35 mA tq IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 40 40 40 μs tgt IG = 2 x IGT PW = 15µs IT = 40A TYP. 2 2 2 μs Note: xx=voltage/10, x=package Static Characteristics Symbol Test Conditions IT = 40A; tp = 380μs VTM Value Unit MAX. 1.6 V MAX. 1000 TJ = 25°C IDRM / IRRM VDRM / VRRM 10 TJ = 125°C TJ = 150°C μA 3000 Thermal Resistances Symbol Parameter Value Junction to case (AC) Rθ(JC) SJxx20Rx SJxx20Nx 1.0 SJxx20Lx 2.4 Unit °C/W Note: xx=voltage/10, x=sensitivity Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Voltage vs. Junction Temperature 1.4 2.0 Ratio of IH / IH (TJ = 25ºC) 1.2 Ratio of IGT / IGT (TJ = 25ºC) 1.6 1.2 0.8 0.4 1.0 0.8 0.6 0.4 0.2 0.0 -40 -15 10 35 60 85 Junction Temperature (TJ) – (ºC) SJxx20xx Series Sxx20x & Sxx25x Series 110 135 150 0.0 -40 -15 10 35 60 85 110 135 150 Junction Temperature (TJ) – (ºC) ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: O  n-State Current vs. On-State Voltage (Typical) 60 Intantaneous On-state Current (iT) – Amps Ratio of IH / IH (TJ = 25ºC) 2.0 1.6 1.2 0.8 0.4 0.0 -40 -15 10 35 60 85 110 135 50 40 30 20 10 0 150 0.6 0.7 0.8 15 12 9 6 3 4 8 1.1 1.2 1.3 1.4 1.5 1.6 12 16 20 150 140 Maximum Allowable case Temperature Average On-State Power Dissipation [PD(AV)] - (Watts) 18 0 1.0 Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current (TC) - ºC) Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 0 0.9 Instantaneous On-state Voltage (vT) – Volts Junction Temperature (TJ) – (ºC) SJxx20Rx SJxx20Nx 130 SJxx20Lx 120 110 100 90 80 70 0 RMS On-State Current [IT(RMS)] - (Amps) 5 10 15 20 RMS On - State Current[I T(RMS) ]Amps Figure 8: Peak Capacitor Discharge Current 150 1000 SJxx20Rx SJxx20Nx 140 Peak Discharge Current (ITM) - Amps Maximum Allowable case Temperature (TC) - ºC) Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current 130 SJxx20Lx 120 110 100 90 80 100 ITRM tW 70 0 2 4 6 8 10 Average On - State Current[I T(AVE)]Amps SJxx20xx Series Sxx20x & Sxx25x Series 12 14 10 0.5 1.0 10.0 50.0 Pulse Current Duration (tW) - ms ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Figure 9: Peak Capacitor Discharge Current Derating 1.2 Normalized Peak Current 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (TC) - ºC Figure 10: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 10 100 1000 Surge Current Duration -- Full Cycles SJxx20xx Series Sxx20x & Sxx25x Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Terminal Finish Ramp-up TL tL TS(max) Preheat TS(min) 100% Matte Tin-plated 25 Ramp-do Ramp-down tS 217°C 60 – 150 seconds - Time (tL) tP TP Temperature Reflow Condition time to peak temperature Time Environmental Specifications Test Body Material UL Recognized compound meeting flammability rating V-0. AC Blocking Lead Material Copper Alloy Temperature Cycling Temperature/ Humidity Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -55°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Design Considerations High Temp Storage Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Moisture Sensitivity Level Level 1, JEDEC-J-STD-020D SJxx20xx Series Sxx20x & Sxx25x Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE A B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J SJxx20xx Series Sxx20x & Sxx25x Series N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs Dimensions –TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE A B C D E F G H J K S V U W 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 Inches Millimeters Min Max Min Max 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.016 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 3.81 .150 2.03 .080 6.60 .260 Product Selector Part Number Voltage Gate Sensitivity Type Package X 35mA Standard SCR TO-220L X X 35mA Standard SCR TO-220R X X 35mA Standard SCR TO-263 400V 600V SJxx20L X SJxx20R SJxx20N SJxx20L1 X X 6mA Standard SCR TO-220L SJxx20R1 X X 6mA Standard SCR TO-220R SJxx20N1 X X 6mA Standard SCR TO-263 SJxx20L2 X X 10mA Standard SCR TO-220L SJxx20R2 X X 10mA Standard SCR TO-220R SJxx20N2 X X 10mA Standard SCR TO-263 Note: xx = Voltage/10 Packing Options Part Number Marking Weight Packing Mode Base Quantity SJxx20LxTP SJxx20Lx 2.2g Tube 500 (50 per tube) SJxx20RxTP SJxx20Rx 2.2g Tube 500 (50 per tube) SJxx20NxTP SJxx20Nx 1.6g Tube 500 (50 per tube) SJxx20NxRP SJxx20Nx 1.6g Embossed Carrier 500 Note: xx=voltage/10, x=sensitivity SJxx20xx Series Sxx20x & Sxx25x Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18 Thyristors 20 Amps / 25 Amp Standard 20 High JunctionSCRs Temperature SCRs TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Part Numbering System Part Marking System SJ 60 20 L 1 TP COMPONENT TYPE SJ: high temperature SCR VOLTAGE RATING 40: 400V 60: 600V CURRENT RATING 20: 20A TO-220 AB - (L and R Package) TO-263 AB - (N Package) PACKING TYPE TP: Tube Pack RP: Reel Pack SENSITIVITY & TYPE [blank]: 35mA 1: 6mA 2: 10mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D 2-Pak) SJ6020L1 YM ® Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. SJxx20xx Series Sxx20x & Sxx25x Series ©2018 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/25/18