SK015LTP

Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series RoHS Description The Sxx15x and Sxx16x Seres provide excellent unidirectional switching for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS-compliant • Glass – passivated junctions Agency Approval Agency • Voltage capability up to 1000 V • Surge capability up to 225 A Applications Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Agency File Number E71639* * - L Packages Only Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Schematic Symbol Symbol Value Unit IT(RMS) 15 & 16 A VDRM / VRRM 400 to 1000 V IGT 30 mA A K G Absolute Maximum Ratings — Standard SCRs Symbol Parameter Sxx15L TC = 90°C 15 IT(RMS) RMS on-state current Sxx16R Sxx16N TC = 110°C 16 Sxx15L TC = 90°C 9.5 IT(AV) Average on-state current Sxx16R Sxx16N TC = 110°C 10.0 ITSM Peak non-repetitive surge current Test Conditions Value single half cycle; f = 50Hz; TJ (initial) = 25°C 188 single half cycle; f = 60Hz; TJ (initial) = 25°C 225 Unit A A A I2t I2t Value for fusing tp = 8.3 ms 210 A2s di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 125°C 125 A/μs IGM Peak gate current TJ = 125°C 3 A PG(AV) Average gate power dissipation TJ = 125°C 0.6 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Value Symbol Test Conditions IGT VD = 12V RL = 60 Ω VGT VD = 12V RL = 60 Ω - MAX. 30 mA MAX. 1 V - MAX. 1.5 V 450 600V 425 800V 400 1000V dv/dt 200 MIN. 400V VD = VDRM; gate open; TJ = 125°C VGD Unit 400V VD = VDRM; gate open; TJ = 100°C Sxx15x Sxx16x V/μs 350 600V 325 800V 300 VD = VDRM RL = 3.3 kΩ TJ = 110°C - MIN. 0.2 V IH IT = 200mA (initial) - MAX. 40 mA tq IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs - MAX. 35 μs tgt IG = 2 x IGT PW = 15µs IT = 12A - TYP. 2 μs Value Unit 1.6 V Note: xx = voltage, x = package (1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs Static Characteristics Symbol Test Conditions 15A Device IT = 30A; tp = 380 µs VTM TJ = 25°C IDRM / IRRM MAX. 16A Device IT = 32A; tp = 380 µs VDRM = VRRM TJ = 100°C 400 - 600V 10 800 - 1000V 20 400 - 600V 500 MAX. 800V TJ = 125°C μA 1000 1000V 3000 400 - 600V 1000 800V 2000 Thermal Resistances Symbol Parameter Rθ(J-C) Junction to case (AC) Rθ(J-A) Junction to ambient Value Sxx16R/ Sxx16N 1.1 Sxx15L 2.5 Sxx16R/Sxx16N 40 Sxx15L 50 Unit °C/W °C/W Note: xx = voltage ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Voltage vs. Junction Temperature 2.0 Ratio of VGT / VGT (TJ = 25ºC) Ratio of IGT / IGT (TJ = 25°C) 2.0 1.5 1.0 0.5 1.5 1.0 0.5 0.0 0.0 -40 -15 10 35 60 85 110 -40 125 -15 10 Junction Temperature (TJ) -- (ºC) Figure 3: Normalized DC Holding Current vs. Junction Temperature Instantaneous On-state Current (iT) – Amps Ratio of IH / IH (TJ = 25°C) 60 85 110 125 Figure 4: O  n-State Current vs. On-State Voltage (Typical) 2.0 1.5 1.0 0.5 60 50 40 30 20 10 0 0.0 -40 -15 10 35 60 85 110 0.7 125 0.8 0.9 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Instantaneous On-state Voltage (vT) – Volts Junction Temperature (TJ) -- (°C) Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current 14 130 125 12 Maximum Allowable Case Temperature (TC ) - °C Average On-State Power Dissipation [PD(AV)] - (Watts) 35 Junction Temperature (TJ) -- (°C) 10 8 6 4 2 Sxx16R Sxx16N 120 115 110 105 Sxx15L 100 95 90 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 85 80 0 0 2 4 6 8 10 12 RMS On-State Current [I T(RMS) ] - (Amps) 14 16 0 2 4 6 8 10 12 14 16 18 RMS On-State Current [IT(RMS)] - Amps ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current 1.2 130 Sxx16R Sxx16N 120 1.0 Normalized Peak Current Maximum Allowable Case Temperature (TC)- °C 125 115 110 105 Sxx15L 100 95 90 0.6 0.4 0.2 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 85 0.8 0.0 80 0 1 2 3 4 5 6 7 8 Average On-State Current [IT(AVE) ] - Amps 9 10 0 11 25 50 75 100 125 150 Case Temperature (TC ) - °C Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Maximum Allowable Ambient Temperature (TA) - °C 100 Sxx16R Sxx16N 80 60 Sxx15L 40 20 0 0.0 0.5 1.0 Average On-State Current [IT(AVE)] - Amps 1.5 Note: xx = voltage Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 1.2 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM 0.8 0.6 0.4 0.2 tW 0.0 10 0.5 1.0 10.0 Pulse Current Duration (tw) - ms 50.0 0 25 50 75 100 125 150 Case Temperature (TC ) - °C ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (I TSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Sxx16R Sxx16N 100 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Sxx15L 10 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C +0/-5 tP TP °C Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time Additional Information Datasheet Resources Samples ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Physical Specifications Environmental Specifications Terminal Finish 100% Matte Tin-plated Body Material UL Recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Test Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature/Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 Dimension O A E 8.13 .320 P A ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 2.92 B 0.105 0.115 2.67 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E AREA (REF.) 0.17 IN2 Dimension 8.13 .320 P A Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 2.92 B 0.105 0.115 2.67 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L L 0.060 0.075 1.52 1.91 H M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 B C 13.36 .526 D 7.01 .276 F R G CATHODE ANODE GATE N K Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Dimensions — TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE 8.41 .331 7.01 .276 A K GATE CATHODE G H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 Millimeters Max C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 U E 0.045 0.060 1.14 1.52 J F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 15.88 S W Inches 8.13 .320 S 0.590 0.625 14.99 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 1.40 .055 3.81 .150 2.03 .080 6.60 .260 ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 15 and 16 Amp Standard SCRs Product Selector Voltage Part Number 400V 600V 800V 1000V Gate Sensitivity Type Package Sxx15L X X X X 30mA Standard SCR TO-220L Sxx16R X X X X 30mA Standard SCR TO-220R Sxx16N X X X X 30mA Standard SCR TO-263 Note: xx = Voltage Packing Options Part Number Sxx15LTP Sxx16RTP Sxx16NTP Sxx16NRP Marking Weight Packing Mode Base Quantity Sxx15L Sxx16R Sxx16N Sxx16N 2.2 g 2.2 g 1.6 g 1.6 g Tube Tube Tube Embossed Carrier 1000 (50 per tube) 1000 (50 per tube) 1000 (50 per tube) 500 Note: xx = Voltage TO-263 Embossed Carrier Reel Pack (RP) Specs Part Marking System Meets all EIA-481-2 Standards 0.63 (16.0) 0.945 0.827 (24.0) (21.0) 0.157 (4.0) TO-220 AB - (L and R Package) TO-263 AB - (N Package) 0.059 (1.5) DIA Gate Cathode Sxx16R YMXXX * * Cover tape ® Anode 0.512 (13.0) Arbor Hole Diameter 12.99 (330.0) Dimensions are in inches (and millimeters). Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code 1.01 (25.7) Direction of Feed Part Numbering System S 60 16 R DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 15: 15A 16: 16A 56 LEAD FORM DIMENSIONS xx: Lead Form Option SENSITIVITY & TYPE (blank): 30mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D 2 -Pak) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20