SK020LTP

Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS-compliant • Glass – passivated junctions • Voltage capability up to 1000 V Agency Approval • Available in isolated TO-220, non-isolated TO-220 and TO-263 packages. Applications Agency Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Agency File Number E71639* * - L Package Only Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Main Features Schematic Symbol Symbol Value Unit IT(RMS) 20 & 25 A VDRM / VRRM 400 to 1000 V IGT 30 to 35 mA A K G Additional Information Datasheet •S  urge capability up to 350 A Resources Samples Absolute Maximum Ratings — 20A SCR Symbol Parameter IT(RMS) RMS on-state current IT(AV) Average on-state current ITSM Peak non-repetitive surge current Test Conditions TC = 80°C Sxx20x & Sxx20L TC = 80°C Value Unit 20 A 12.8 A single half cycle; f = 50Hz; TJ (initial) = 25°C 255 single half cycle; f = 60Hz; TJ (initial) = 25°C 300 A I2t I2t Value for fusing tp = 8.3 ms 374 A2s di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 125 A/μs IGM Peak gate current TJ = 125°C 3 A PG(AV) Average gate power dissipation TJ = 125°C 0.6 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Absolute Maximum Ratings — 25A SCR Symbol Parameter IT(RMS) RMS on-state current IT(AV) Average on-state current ITSM Test Conditions Value Unit 25 A 16 A Sxx25L: TC=75°C Sxx25R/Sxx25N: TC=100°C Sxx25L TC = 75°C Sxx25R/Sxx25N TC = 100°C Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 300 single half cycle; f = 60Hz; TJ (initial) = 25°C 350 A I2t I2t Value for fusing tp = 8.3 ms 510 A2s di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 150 A/μs IGM Peak gate current TJ = 125°C 3.5 A PG(AV) Average gate power dissipation TJ = 125°C 0.8 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Value Test Conditions IGT VD = 12V RL = 30 Ω VGT VD = 12V RL = 30 Ω Sxx20L Sxx25x - MAX. 30 35 - MIN. 1 1 - MAX. 1.5 400V VD = VDRM; gate open; TJ = 100°C 425 800V 400 VGD V 200 MIN. 400V VD = VDRM; gate open; TJ = 125°C mA 450 600V 1000V dv/dt Unit V/μs 350 600V 325 800V 300 VD = VDRM RL = 3.3 kΩ TJ = 125°C - MIN. IH IT = 400mA (initial) - MAX. 0.2 tq (1) - MAX. 35 μs tgt IG = 2 x IGT PW = 15µs IT = 40A - TYP. 2 μs 40 V 50 mA Note: xx = voltage, x = package (1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Static Characteristics Symbol Test Conditions 20A Device IT = 40A; tp = 380μs VTM MAX. 25A Device IT = 50A; tp = 380μs TJ = 25°C VDRM / VRRM TJ = 100°C 1.6 V 400 – 600V 10 20 500 MAX. 800V μA 1000 1000V TJ = 125°C Unit 800 – 1000V 400 – 600V IDRM / IRRM Value 3000 400 – 600V 1000 800V 2000 Thermal Resistances Symbol Parameter Rθ(J-C) Value Junction to case (AC) Junction to ambient Rθ(J-A) Sxx25R / Sxx25N 1.0 Sxx20L/ Sxx25L 2.4 Sxx25R 40 Sxx20L/ Sxx25L 50 Unit °C/W °C/W Note: xx = voltage Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Voltage vs. Junction Temperature 2.0 Ratio of VGT / VGT (TJ = 25ºC) Ratio of IGT / IGT (TJ = 25ºC) 2.0 1.5 1.0 0.5 0.0 -40 -15 10 35 60 Junction Temperature (TJ) – (ºC) 85 110 125 1.5 1.0 0.5 0.0 -40 -15 10 35 60 85 110 125 Junction Temperature (TJ) – (ºC) ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: O  n-State Current vs. On-State Voltage (Typical) Intantaneous On-state Current (iT) – Amps Ratio of IH / IH (TJ = 25ºC) 2.0 1.5 1.0 0.5 90 70 60 40 30 20 10 35 60 85 110 Sxx20L 10 0 -15 Sxx25L Sxx25R Sxx25N 50 0.0 -40 T J = 25°C 80 125 0.7 0.8 22 130 20 125 18 120 16 Sxx20L 12 10 8 Sxx25L Sxx25R Sxx25N 6 4 0 10 15 20 100 Sxx20L 90 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 5 10 15 25 30 Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current Maximum Allowable Ambient Temperature (TA) - ºC 120 Maximum Allowable Case Temperature (TC) - °C 20 RMS On-State Current [IT(RMS)] - Amps 120 Sxx25R Sxx25N 110 105 100 Sxx25L Sxx20L 85 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 75 1.6 Sxx25L 95 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 125 80 1.5 105 0 130 90 1.4 70 25 Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current 95 1.3 110 RMS On-State Current [IT(RMS)] - (Amps) 115 1.2 Sxx25R Sxx25N 75 5 1.1 115 80 2 0 1.0 Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation [PD(AV)] - (Watts) Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 14 0.9 Instantaneous On-state Voltage (vT) – Volts Junction Temperature (TJ) – (ºC) 100 80 Sxx25L Sxx25N Sxx25R 60 Sxx20L 40 20 0 70 0 2 4 6 8 10 12 14 Average On-State Current [IT(AVE)] - Amps 16 18 0.0 0.5 1.0 1.5 2.0 2.5 RMS On-State Current [IT(RMS)] - Amps ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current Maximum Allowable Ambient Temperature (TA) - ºC 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 100 Sxx25L Sxx25N Sxx25R 80 Sxx20L 60 40 20 0 0.0 0.5 1.5 1.0 Average On-State Current [IT(AVE)] - Amps Note: xx = voltage Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 1.2 Sxx25L Sxx25R Sxx25N 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 Sxx20L 100 ITRM 0.8 0.6 0.4 0.2 tW 0.0 10 0.5 50.0 10.0 1.0 0 Pulse Current Duration (tW) - ms 25 50 75 100 125 150 Case Temperature (TC) - ºC Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Sxx25L Sxx25R Sxx25N 100 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Sxx20L 10 1 10 100 1000 Surge Current Duration -- Full Cycles ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 217°C 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 tS time to peak temperature Time Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature/Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Ramp-do Ramp-down ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 Dimension O A E 8.13 .320 P A ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 2.92 B 0.105 0.115 2.67 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max 0.380 0.420 9.65 10.67 2.92 Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 A Inches Millimeters B 0.105 0.115 2.67 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L L 0.060 0.075 1.52 1.91 H M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 B C 13.36 .526 D 7.01 .276 F R G CATHODE ANODE GATE K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs Dimensions –TO- 263AB (N-package) — D2-Pak Surface Mount TC MEASURING POINT B AREA: 0.11 in 2 C V Dimension E ANODE 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 Inches Millimeters Min Max Min A 0.360 0.370 9.14 Max 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.016 1.78 1.40 .055 3.81 .150 2.03 .080 6.60 .260 Product Selector Part Number Voltage 400V 600V 800V Gate Sensitivity 1000V Type Package Sxx20L X X X X 30mA Standard SCR TO-220L Sxx25L X X X X 35mA Standard SCR TO-220L Sxx25R X X X X 35mA Standard SCR TO-220R Sxx25N X X X X 35mA Standard SCR TO-263 Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx20LTP Sxx20L 2.2g Tube 1000 (50 per tube) 1000 (50 per tube) Sxx25LTP Sxx25L 2.2g Tube Sxx25RTP Sxx25R 2.2g Tube 1000 (50 per tube) Sxx25NTP Sxx25N 1.6g Tube 1000 (50 per tube) Sxx25NRP Sxx25N 1.6g Embossed Carrier 500 Note: xx = Voltage ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20 Teccor® brand Thyristors 20 / 25 Amp Standard SCRs TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Part Numbering System S 60 20 L DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V Part Marking System 56 TO-220 AB - (L and R Package) TO-263 AB - (N Package) LEAD FORM DIMENSIONS xx: Lead Form Option SENSITIVITY & TYPE (blank): Sxx20L = 30mA Sxx25x = 35mA S6020R YMXXX ® CURRENT RATING 20: 20A 25: 25A PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D2 -Pak) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. ©2019 Littelfuse, Inc Specifications are subject to change without notice. Revised: BO.12/10/20