Gas Discharge Tubes
SL1003A Series
SL1003A Series
RoHS
Description
The SL1003A series has been especially developed
for Broadband equipment. Special design features
provide high levels of protection against fast rising
transients in the 100V/μs to 1kV/μs range usually
caused by lightning disturbances.
These devices have ultra low capacitance 1.5pF and
present insignificant signal losses up to 1.5GHz.
These devices are extremely robust and are able to
divert a 5000A pulse without destruction. For AC
Power Cross of long duration, over-current protection
is recommended.
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
E128662
3 Electrode GDT Graphical Symbol
Additional Information
Datasheet
Resources
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
• RoHS compliant
• Low insertion loss
• Surface mountable
• 5kA surge capability
tested with 8/20/μs
pulse as defined by IEC
61000-4-5
• GHz working frequency
• Excellent response to
fast rising transients
• Can be used to meet
Telcordia GR1089
without series
resistance
• 10/700 6kV capability,
as per ITU-Tk.21,
enhanced test level
• 2000 Amp 2/10μs surge
rating
Applications
Samples
• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV
equipment
• General telecom
equipment
Gas Discharge Tubes
SL1003A Series
Electrical Characteristics
Device Specifications (at 25°C)
Part Number
(@100V/µs)
MIN
SL1003A090
Life Ratings
Impulse
Impulse Insulation CapaciDC Breakdown
Breakdown Breakdown Resistance tance
in Volts1,2,3
in Volts2,3
In Volts2,3
(@100V/s)
(@1MHz
72
TYP
90
MAX
MAX
108
SL1003A230 184 230 276
(@1kV/µs)
0V Bias)
MIN
700
MAX
Arc
Voltage
Surge
Life
(on state
(@200A
Voltage)
10/1000µs)
@1Amp Min
Nominal
Impulse
Discharge
Current
(8/20µs)
Nominal
AC
Discharge
Current
(10x1s
@50Hz)
AC
Discharge
Current
DC
Holdover
Voltage4
(9 Cycles @
50Hz)
TYP
(1 Application)
TYP
109Ω
(at 50V)
Max Impulse
Discharge
Current
@ 10/350µs
50 V
600
SL1003A250 200 250 300
750
SL1003A260 210 260 310
SL1003A300 240 300 360
750
850
SL1003A350 280 350 420
800
900
SL1003A400 320 400 480
850
950
SL1003A450 360 450 540
900
1000
SL1003A500 400 500 600
1100
1400
109Ω
(at 100V)
1.5 pF
~10 to
35 V
300
shots
10 shots
(@10kA)
10 A
2 kA
30 A
135 V
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode, tested according to ITU-T Rec. K.12
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs.
Product Characteristics
Materials
Leaded Device:
Tin-plated copper wire
Core and Surface Mount: Dull Tin-plated
Product Marking
Littelfuse 'LF' Mark, voltage and date
code
Glow to Arc
Transition Current
~1 Amp
Glow Voltage
~60 to 200 Volts
Storage and
Operational
Temperature
-40 to +90°C
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas Discharge Tubes
SL1003A Series
Device Dimensions
For SL1003A series:
Dimensions are in millimeters [and inches]
'C' Type Core Devices
'R' Type Radial Lead Devices (SL1003AxxxR-001)
PROFILE VIEW
TOP VIEW
Ø6.0 ± 0.1
[0.236 ± 0.039]
12.2 - 0.2
[0.480 - 0.079]
8.1 ± 0.2
[0.236 ± 0.039]
4.3 + 1.5
[0.169 + 0.059]
PROFILE VIEW
TOP VIEW
8.1 ± 0.2
[0.319 ± 0.0079]
Ø6.0 ± 0.1
[0.236 ± 0.0039]
6.0 ± 0.5
[0.236 ± 0.020]
4.4 ± 0.3
[0.173± 0.012]
4.4 ± 0.3
[0.173± 0.012]
0.8 DIA.
[0.031]
'R' Type Radial Lead Devices (SL1003AxxxR and SL1003AxxxRF)
PROFILE VIEW
TOP VIEW
12.2 - 2
[0.480 - 0.079]
6.0 ± 0.1
[0.236 ± 0.039]
'SM' Type Surface Mount Devices
TOP VIEW
PROFILE VIEW
6.0 ± 0.1
8.1 ± 0.2
[0.319 ± 0.0079]
3.20
[0.126]
2.8
[0.110]
2.8
[0.110]
Ø6.0 ± 0.1
8.1 ± 0.2
[0.236 ± 0.039]
1.5
[0.059]
6.0 ± 0.5
[0.236 ± 0.020]
4.3 + 1.5
[0.169 + 0.059]
8
6.
Ø
0.5
[0.019]
±
0.8 DIA.
[0.031]
1
3.9 ± 0.3
[0.154± 0.012]
0.
3.9 ± 0.3
[0.154± 0.012]
TOP VIEW
2.20
[0.087]
1.2 Max
[0.047]
PROFILE VIEW
TOP VIEW
12.2 - 2
[0.480 - 0.079]
6.0 ± 0.1
[0.236 ± 0.039]
1.20
[0.04]
1.20
[0.047]
8.1 ± 0.2
[0.236 ± 0.039]
7.00
[0.275]
allow space
for product
clearance
6.000
[0.236]
6.7 ± 0.5
[0.263 ± 0.020]
2.10
2.10
[0.083] [0.083]
4.3 + 1.5
[0.169 + 0.059]
6.40
[0.252]
6.0 ± 0.5
[0.236 ± 0.020]
7.60
[0.299]
3.9 ± 0.3
[0.154± 0.012]
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
3.9 ± 0.3
[0.154± 0.012]
0.8 DIA.
[0.031]
8.80
[0.346]
Gas Discharge Tubes
SL1003A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
Pb-free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 seconds
Average Ramp-up Rate (Liquidus Temp
(TL) to peak)
3°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
(t 25ºC to peak)
Time
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Recommended Process Parameters:
280
Wave Parameter
260
240
Lead-Free Recommendation
Preheat:
220
(Depends on Flux Activation Temperature)
200
180
160
140
120
100
80
60
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
40
230
240
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
20
0
0
30
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas Discharge Tubes
SL1003A Series
Packaging
'C' Type Core Items: Package bulk pack in polybag, 500 pcs/bag
'R' and ‘RF’ Type Radial Lead Items: Packed in tray, 100 pcs/tray
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 700 pcs/reel (specifications below)
0.4 ± 0.05
[0.016 ± 0.0020]
Dimensions are in millimeters [and inches]
a
5° m
x
7.4 ± 0.1
[0.291 ± 0.0039]
R0.3 typical
[0.012]
275.0
[10.83]
100.0
[3.94]
76.0
[2.99]
24 ± 0.3
[ 0.945 ± 0.012]
11.5 ± 0.1
[0.453 ± 0.0039]
4 [0.157]
14 [0.551]
8.6 ± 0.1
[0.339 ± 0.0039]
20°
m
ax
3 [0.118]
1.75 ± 0.1
[0.069 ± 0.0039]
Dimensions are in millimeters [and inches]
10x4 ± 0.1 = 40 ± 0.2
Ø1.5 +0.1
[10x0.157 ± 0.004 = 1.575 ± 0.008]
[0.059 +0.0039]
Ø1.5 +0.1
Ø4 ± 0.1
Ø2 ± 0.1
[0.059 +0.0039]
[0.157 ± 0.0039] [0.079 ± 0.0039]
25.0
[0.98]
17.7
[0.697]
Direction of Feed
12 ± 0.1
[0.472 ± 0.0039]
3
[0.118]
9
[0.354]
6.1 ± 0.1
[0.240 ± 0.0039]
SMD-tape according to IEC 60286-3
Part Numbering System and Ordering Information
SL1003 A XXX XX
Type 3 Pole Arrestor
Voltage
Pin Configuration
C = Core type (Packed in polybag, 500pcs/bag)
R = Radial Lead without Failsafe (Packed in tray, 100pcs/tray)
RF = Radial Lead with Failsafe (Packed in tray, 100pcs/tray)
SM = Surface Mount (Packed in carrier and tape, 700pcs/reel)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete
Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse:
SL1003A350RF SL1003A400R SL1003A090C SL1003A090SM SL1003A250R SL1003A400SM SL1003A350R
SL1003A400C SL1003A260C SL1003A260R SL1003A300SM SL1003A090R SL1003A300C SL1003A300R
SL1003A230SM SL1003A450C SL1003A230RF SL1003A260SM SL1003A350SM SL1003A230R SL1003A450SM
SL1003A260RF SL1003A250SM SL1003A450R SL1003A350C SL1003A230C SL1003A250RF SL1003A250C
SL1003A400RF SL1003A500R SL1003A090RF SL1003A500SM SL1003A250SMF SL1003A230SMF
很抱歉,暂时无法提供与“SL1003A090R”相匹配的价格&库存,您可以联系我们找货
免费人工找货