SLD33U-017

TVS Diodes Axial Leaded – 2200W > SLD series SLD Series RoHS Pb e3 Description Uni-directional The AEC-Q101 qualified SLD Series is packaged in a highly reliable industry standard P600 axial leaded package and is designed to provide precision overvoltage protection for sensitive electronics. Features Bi-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Symbol Value Unit Peak Pulse Power Dissipation 10ms x 150ms Test Waveform Parameter PPPM 2200 W Peak Pulse Power Dissipation 10μs x 1000μs Test Waveform PPPM 5000 W Steady STLte Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 600 A Maximum Instlntlneous Forward Voltlge at 100A for Unidirectional Only VF 3.5 V TJ , TSTG -55 to 175 °C Typical Thermal Resistlnce Junction to Lead RƟJL 8.0 °C/W Typical Thermal Resistlnce Junction to Ambient RƟJA 40 °C/W Operating Junction and Storage Temperature Range Functional Diagram • High reliability application and automotive grade AEC-Q101 qualified with TJ 175°C • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) • Glass passivated chip junction in P600 package • Meets ISO7637 and ISO16750 load dump test; 2200W peak pulse capability at 10μs × 150ms waveform, repetition rate (duty cycles): 0.01% • Fast response time: typically less than 1.0ps from 0 Volts to VBR min • Excellent clamping capability • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Low incremental surge resistance • High temperature to reflow soldering guaranteed: 260°C/10sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension • UL Recognized case material meeting flammability rating V-0. • Matte tin lead–free plated • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications Designed to protect sensitive electronics from: - Inductive Load Switching - Alternator Load Dump Bi-directional Cathode Anode Uni-directional © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 TVS Diodes Axial Leaded – 2200W > SLD series Electrical Characteristics (T =25°C unless otherwise noted) A Breakdown Voltage VBR @ IT (V) Test Current IT (mA) Reverse Stand off Voltage VR (Volts) Maximum Reverse Leakage @ VR IR (µA) Maximum Peak Pulse Current Ipp (A) 5.0 10 10 5.0 11 10 14.7 5.0 12 14.4 15.9 5.0 SLD14-018 15.6 17.2 SLD15U-017 SLD15-018 16.7 SLD16U-017 SLD16-018 SLD17U-017 Maximum Clamping Voltage @ IPP VC (V) Agency Approval 300.0 17.0 x 280.2 18.2 x 10 256.3 19.9 x 13 10 237.2 21.5 x 5.0 14 10 219.8 23.2 x 18.5 5.0 15 10 209.0 24.4 x 18.0 19.3 5.0 16 10 196.2 26.0 x SLD17-018 18.9 20.9 5.0 17 10 184.8 27.6 x SLD18U-017 SLD18-018 20.0 22.1 5.0 18 10 174.7 29.2 x SLD20U-017 SLD20-018 22.2 24.5 5.0 20 10 157.4 32.4 x SLD22U-017 SLD22-018 24.4 26.9 5.0 22 10 143.7 35.5 x SLD24U-017 SLD24-018 26.7 29.5 5.0 24 10 131.1 38.9 x SLD26U-017 SLD26-018 28.9 31.9 5.0 26 10 121.1 42.1 x SLD28U-017 SLD28-018 31.1 34.4 5.0 28 10 112.3 45.4 x SLD30U-017 SLD30-018 33.3 36.8 5.0 30 10 105.4 48.4 x SLD33U-017 SLD33-018 36.7 40.6 5.0 33 10 95.7 53.3 x SLD36U-017 SLD36-018 40.0 44.2 5.0 36 10 87.8 58.1 x SLD40U-017 SLD40-018 44.4 49.1 5.0 40 10 79.1 64.5 x SLD43U-017 SLD43-018 49.0 54.2 5.0 43 10 73.5 69.4 x SLD45U-017 SLD45-018 50.0 55.3 5.0 45 10 70.2 72.7 x SLD48U-017 SLD48-018 53.3 58.9 5.0 48 10 65.9 77.4 x SLD51U-017 SLD51-018 56.7 62.7 5.0 51 10 61.9 82.4 x SLD54U-017 SLD54-018 60.0 66.3 5.0 54 10 58.6 87.1 x SLD58U-017 SLD58-018 64.4 71.2 5.0 58 10 54.5 93.6 x SLD60U-017 SLD60-018 68.4 75.6 5.0 60 10 52.7 96.8 x Part Number (Uni) Part Number (Bi) MIN MAX SLD10U-017 SLD10-018 11.8 13.0 SLD11U-017 SLD11-018 12.2 13.5 SLD12U-017 SLD12-018 13.3 SLD13U-017 SLD13-018 SLD14U-017 Notes: 1. VBR measured after IT applied for 300µs, IT= square wave pulse or equivalent. 2. Surge current waveform per 10μs x 1000μs exponential wave and derated per Fig. 4. 3. All terms and symbols are consistent with ANSI/IEEE C62.35 Load Dump Test Wave Form Parameter 12V system 24V system US 65v to 87V 123V to 174V Ri 0.5Ω to 4Ω 1Ω to 8Ω td 40 ms to 400 ms 100 ms to 350 ms tr (10 -50 )ms Note: LF use td=400ms for 12V system test; td=350ms for 24V system © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 TVS Diodes Axial Leaded – 2200W > SLD series I-V Curve Characteristics I Uni-directional I Bi-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT Ipp Ipp PPPM VR VBR VC IR VF V VR VBR Vc Peak Pulse Power Dissipation (IPP x VC)-- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve 100 Voltage Transients PPPM-Peak Pulse Power (kW) TJ initial = Tamb Voltage or Current Voltage Across TVS Current Through TVS 10 1 0.00001 0.0001 Time 0.01 0.1 1 Figure 4 - Typical Junction Capacitance 100 100000 80 10000 Bi-directional V=0V Uni-directional V=0V Bi-directional @ VR 60 Cj (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % Figure 3 - Peak Pulse Power Derating Curve 0.001 td-Pulse Width (sec.) 1000 Uni-directional @ VR 100 40 10 20 Tj=25C f=1.0MHz Vsig=50mVp-p 10/1000µsec. Waveform 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) 175 200 1 1 10 100 1000 VBR - Reverse Breakdown Voltage (V) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 TVS Diodes Axial Leaded – 2200W > SLD series Figure 5 - Maximum Non-Repetitive Peak Forward Surge Current IFSM, Peak Forward Surge Current (A) 450 400 350 300 250 200 150 100 50 0 1 10 Number of Cycles at 60 Hz 100 Figure 6 - SOA Chart ISO7637 5A 12V Test System 0.5 Td:400ms 1.5 3 Ri(ohm) Ri(ohm) SLD28U-017 load dump 2 1.0 2.0 2.5 Td:350ms 4 5 6 3.0 7 3.5 4.0 ISO7637 5A 24V Test System 1 SLD15U-017 & SLD15-018 load dump 8 65 123 70 75 VS(volt) 80 Flow/Wave Soldering (Solder Dipping) Dipping Time : Soldering : 153 143 163 173 VS(volt) Environmental Specifications Soldering Parameters Peak Temperature : 133 85 High Temp. Storage JESD22-A103 HTRB JESD22-A108 265OC Temperature Cycling JESD22-A104 10 seconds H3TRB JESD22-A101 1 time RSH JESD22-B106 Physical Specifications Weight 0.07oz., 2.1g Case P600 molded plastic body over passivated junction. Polarity Color band denotes cathode for unidirectional components Terminal Matte Tin axial leads, solderable per JESD22-B102. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 TVS Diodes Axial Leaded – 2200W > SLD series Dimensions D Cathode Band (for Uni-directional products only) Dimensions C A A B P600 Part Numbering System Inches Min Millimeters Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.054 1.22 1.36 D 0.340 0.360 8.60 9.10 Part Marking System OPTION CODE: BLANK Reel Tape -B Bulk Packaging Cathode Band (for Uni-directional products only) TYPE CODE: U-017 Uni-Directional -018 Bi-Directional F SLD XX U-017 X YYWW Trace Code Marking Littelfuse Logo SLDXXX VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) YY:Year Code WW: Week Code Product Type SERIES CODE Packing Options Component Package Quantity Packaging Option Packaging Specification SLDxxXXX P600 800 Tape & Reel EIA STD RS-296 SLDxxXX-B P600 100 BOX Littelfuse Spec. Part Number Tape and Reel Specification Off Center either side 2.063+0.079/-0.039 (53.0+2.0/-1.0) 0.028(0.7) 2.56 (65.0) 0.047 (1.2) 0.394+/-0.020 (10.0+/-0.5) 13.0 (330.2) 0.236 (6.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) Direction of Feed © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19