SMCG54CA-HR

TVS Diodes Surface Mount – 1500W > SMCG-HR series SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25 C unless otherwise noted) O Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000µs waveform (Fig.2)(Note 1), (Note 2) PPPM 1500 W Power Dissipation on infinite heat sink at TA=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 200 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5 V Operating Junction and Storage Temperature Range TJ , TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead RƟJL 15 °C/W Typical Thermal Resistance Junction to Ambient RƟJA 75 °C/W Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Functional Diagram • High-Reliability upscreened for critical applications require higher reliability performance and low infant mortality failures. • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1µA above 12V • For surface mounted applications to optimize board space • L bend lead forming gives best solderbility for Hi reliability application • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Built-in strain relief • Fast response time: typically less than 1.0ps from 0V to VBR min • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) • Glass passivated chip junction • High temperature soldering guaranteed: 260°C/10 seconds at terminals • Meet MSL level1, per J-STD-020, high temperature soldering guaranteed. • Matte tin lead–free plated • Halogen free • RoHS compliant with exemption 7a and 7c-I • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS Components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Cathode Anode Uni-directional © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19 TVS Diodes Surface Mount – 1500W > SMCG-HR series Electrical Characteristics Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Maximum Clamping Voltage VC @ Ipp (V) Maximum Maximum Reverse Peak Leakage IR Pulse Current @ VR Ipp (A) (µA) Agency Approval Part Number (Uni) Part Number (Bi) UNI BI MIN MAX SMCG5.0A-HR SMCG5.0CA-HR GDE BDE 5.0 6.40 7.00 10 9.2 163.0 800 SMCG6.0A-HR SMCG6.0CA-HR GDG BDG 6.0 6.67 7.37 10 10.3 145.7 800 X SMCG6.5A-HR SMCG6.5CA-HR GDK BDK 6.5 7.22 7.98 10 11.2 134.0 500 X Marking Current IT (mA) X SMCG7.0A-HR SMCG7.0CA-HR GDM BDM 7.0 7.78 8.60 10 12.0 125.0 200 X SMCG7.5A-HR SMCG7.5CA-HR GDP BDP 7.5 8.33 9.21 1 12.9 116.3 100 X SMCG8.0A-HR SMCG8.0CA-HR GDR BDR 8.0 8.89 9.83 1 13.6 110.3 50 X SMCG8.5A-HR SMCG8.5CA-HR GDT BDT 8.5 9.44 10.40 1 14.4 104.2 20 X SMCG9.0A-HR SMCG9.0CA-HR GDV BDV 9.0 10.00 11.10 1 15.4 97.4 10 X SMCG10A-HR SMCG10CA-HR GDX BDX 10.0 11.10 12.30 1 17.0 88.3 5 X SMCG11A-HR SMCG11CA-HR GDZ BDZ 11.0 12.20 13.50 1 18.2 82.5 1 X SMCG12A-HR SMCG12CA-HR GEE BEE 12.0 13.30 14.70 1 19.9 75.4 1 X SMCG13A-HR SMCG13CA-HR GEG BEG 13.0 14.40 15.90 1 21.5 69.8 1 X SMCG14A-HR SMCG14CA-HR GEK BEK 14.0 15.60 17.20 1 23.2 64.7 1 X SMCG15A-HR SMCG15CA-HR GEM BEM 15.0 16.70 18.50 1 24.4 61.5 1 X SMCG16A-HR SMCG16CA-HR GEP BEP 16.0 17.80 19.70 1 26.0 57.7 1 X SMCG17A-HR SMCG17CA-HR GER BER 17.0 18.90 20.90 1 27.6 54.4 1 X SMCG18A-HR SMCG18CA-HR GET BET 18.0 20.00 22.10 1 29.2 51.4 1 X SMCG20A-HR SMCG20CA-HR GEV BEV 20.0 22.20 24.50 1 32.4 46.3 1 X SMCG22A-HR SMCG22CA-HR GEX BEX 22.0 24.40 26.90 1 35.5 42.3 1 X SMCG24A-HR SMCG24CA-HR GEZ BEZ 24.0 26.70 29.50 1 38.9 38.6 1 X SMCG26A-HR SMCG26CA-HR GFE BFE 26.0 28.90 31.90 1 42.1 35.7 1 X SMCG28A-HR SMCG28CA-HR GFG BFG 28.0 31.10 34.40 1 45.4 33.1 1 X SMCG30A-HR SMCG30CA-HR GFK BFK 30.0 33.30 36.80 1 48.4 31.0 1 X SMCG33A-HR SMCG33CA-HR GFM BFM 33.0 36.70 40.60 1 53.3 28.2 1 X SMCG36A-HR SMCG36CA-HR GFP BFP 36.0 40.00 44.20 1 58.1 25.9 1 X SMCG40A-HR SMCG40CA-HR GFR BFR 40.0 44.40 49.10 1 64.5 23.3 1 X SMCG43A-HR SMCG43CA-HR GFT BFT 43.0 47.80 52.80 1 69.4 21.7 1 X SMCG45A-HR SMCG45CA-HR GFV BFV 45.0 50.00 55.30 1 72.7 20.6 1 X SMCG48A-HR SMCG48CA-HR GFX BFX 48.0 53.30 58.90 1 77.4 19.4 1 X SMCG51A-HR SMCG51CA-HR GFZ BFZ 51.0 56.70 62.70 1 82.4 18.2 1 X SMCG54A-HR SMCG54CA-HR GGE BGE 54.0 60.00 66.30 1 87.1 17.3 1 X SMCG58A-HR SMCG58CA-HR GGG BGG 58.0 64.40 71.20 1 93.6 16.1 1 X SMCG60A-HR SMCG60CA-HR GGK BGK 60.0 66.70 73.70 1 96.8 15.5 1 X SMCG64A-HR SMCG64CA-HR GGM BGM 64.0 71.10 78.60 1 103.0 14.6 1 X SMCG70A-HR SMCG70CA-HR GGP BGP 70.0 77.80 86.00 1 113.0 13.3 1 X SMCG75A-HR SMCG75CA-HR GGR BGR 75.0 83.30 92.10 1 121.0 12.4 1 X SMCG78A-HR SMCG78CA-HR GGT BGT 78.0 86.70 95.80 1 126.0 11.9 1 X SMCG85A-HR SMCG85CA-HR GGV BGV 85.0 94.40 104.00 1 137.0 11.0 1 X SMCG90A-HR SMCG90CA-HR GGX BGX 90.0 100.00 111.00 1 146.0 10.3 1 X SMCG100A-HR SMCG100CA-HR GGZ BGZ 100.0 111.00 123.00 1 162.0 9.3 1 X SMCG110A-HR SMCG110CA-HR GHE BHE 110.0 122.00 135.00 1 177.0 8.5 1 X SMCG120A-HR SMCG120CA-HR GHG BHG 120.0 133.00 147.00 1 193.0 7.8 1 X © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19 TVS Diodes Surface Mount – 1500W > SMCG-HR series Screen Process 100% vision inspection MIL-STD-750 method 2074 100%High Temperature Storage Life (168hrs,175C°) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature cycle test (-55-150C°, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2x) JEDEC J-STD-020 100% surge test (2x) MIL-STD-750 method 4066 100% HTRB(150C°, Bias=VR(80% breakdown voltage), 96hrs),for Bi-direction products, 96hrs for each direction MIL–STD–750 method 1038 Final electrical test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littelfuse service Group B Test Requirement Screen Method Condition Requirement Surge Test 10/1000 µS Peak Pulse Waveform Maximum Clamping Voltage (VC) @ Peak Pulse Current (IPP) Sample Size 45 Perform 10x Accept 0 Failures Burn - In (HTRB) MIL - STD - 750, Method 1038.5 Applied Voltage 100% VR@150°C Sample Size 45 For Unidirectional, 150C°/VR/340hours, for Bidirectional, 150C°/ VR /680hrs(340hours for each direction) Accept 0 Failures Electrical Tests -- IR@VR, V(BR)@IT Sample Size 45 Accept 0 Failures I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT V Ipp PPPM VR VBR VC IR VF Vc VBR VR IT IR IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19 TVS Diodes Surface Mount – 1500W > SMCG-HR series Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating 100 PPPM-Peak Pulse Power (kW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS TJ initial = Tamb 10 1 0.1 0.001 0.01 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) Uni-directional V=VR 100 Bi-directional V=VR 10 100 VBR - Reverse Breakdown Voltage(V) Half Value IPPM IPPM ( ) 2 50 0 Transient Thermal Impedance (°C/W) Cj(pF) Bi-directional V=0V 1 Peak Value IPPM 100 10/1000µsec. Waveform as defined by R.E.A td 0 1.0 2.0 3.0 4.0 Figure 6 - Typical Transient Thermal Impedance Uni-directional V=0V 10 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM t-Time (ms) 100000 10000 tr=10µsec 175 Figure 5 - Typical Junction Capacitance 1 10 Figure 4 - Pulse Waveform Figure 3 - Peak Pulse Power Derating Curve 1000 1 td-Pulse Width (ms) Time 0 0.1 1000 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 1000 TP - Pulse Duration (s) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19 TVS Diodes Surface Mount – 1500W > SMCG-HR series IFSM - Peak Forward Surge Current (A) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 200 180 160 140 120 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate Reflow 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C +0/-5 Case Polarity Terminal Ramp-up TL Critical Zone TL to TP tL Ts(max) Ts(min) Ramp-down ts Preheat °C Physical Specifications Weight tp TP Temperature (T) Reflow Condition 0.007 ounce, 0.21 grams JEDEC DO-215AB. Molded plastic body over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Matte Tin-plated leads, Solderable per JESD22-B102 25˚C t 25˚C to Peak Time (t) Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19 TVS Diodes Surface Mount – 1500W > SMCG-HR series Dimensions DO-215AB (SMCG) Dimensions Cathode Band A C A B H N D F E I Seating Plane G L K J Dimensions in inches and (millimeters) Inches Millimeters Min Max Min Max 0.115 0.125 2.920 3.170 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.075 0.095 1.900 2.410 E 0.038 0.058 0.970 1.470 F - 0.020 - 0.510 G 0.380 0.400 9.640 10.160 H 0.024 0.040 0.610 1.020 I 0.006 0.016 0.150 0.410 1.270 J - 0.050 - K - 0.310 - 7.870 L - 0.050 - 1.270 M - 0.125 - 3.170 N 0.002 0.008 0.050 0.200 M Solder Pads Part Numbering System SMCG Part Marking System xxx C A -HR Cathode Band F (for Uni-directional products only) High Reliability 5% VBR VOLTAGE TOLERANCE XXX BI-DIRECTIONAL YMXXX VR VOLTAGE Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code SERIES Packaging Component Package Part number SMCGxxxXX-HR Quantity DO-215AB 1500 Packaging Option Tape & Reel – 24mm tape /13” reel Packaging Specification EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.945 (24.0) Cathode 0.472 (12.0) 0.059 DIA (1.5) Cover tape 13.0 (330) 0.800 (20.2) Arbor Hole Dia. 0.960 (24.4) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/29/19