SMCJ51A-HR

TVS Diodes Surface Mount – 1500W > SMCJ-HR Series SMCJ-HR Series RoHS Pb e3 Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Bi-directional Agency Approvals Agency Features • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief •V  BR @TJ= VBR@25°C x (1+αT x Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter (TJ - 25)) Symbol Peak Pulse Power Dissipation at TA=25ºC by PPPM 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Power Dissipation on infinite heat sink at PM(AV) TA=50OC Peak Forward Surge Current, 8.3ms Single Half IFSM Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional VF only (Note 4) Operating Junction and Storage Temperature TJ , TSTG Range Value Unit 1500 W 6.5 W 200 A 3.5/5.0 V -65 to 150 °C Typical Thermal Resistance Junction to Lead RuJL 15 °C/W Typical Thermal Resistance Junction to Ambient RuJA 75 °C/W Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Functional Diagram (αT:Temperature Coefficient) • Glass passivated chip junction • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Fast response time: typically less than 1.0ps from 0V to BV min • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1µA above 12V • High Temperature soldering guaranteed: 260°C/40 seconds at terminals • Plastic package has Underwriters laboratory flammability 94V-O • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen free and RoHS compliant • 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 • Recognized to UL 497B as an Isolated Loop Circuit Protector Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Cathode Anode Uni-directional © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20 TVS Diodes Surface Mount – 1500W > SMCJ-HR Series Electrical Characteristics Part Number (Uni) SMCJ5.0A-HR SMCJ6.0A-HR SMCJ6.5A-HR SMCJ7.0A-HR SMCJ7.5A-HR SMCJ8.0A-HR SMCJ8.5A-HR SMCJ9.0A-HR SMCJ10A-HR SMCJ11A-HR SMCJ12A-HR SMCJ13A-HR SMCJ14A-HR SMCJ15A-HR SMCJ16A-HR SMCJ17A-HR SMCJ18A-HR SMCJ20A-HR SMCJ22A-HR SMCJ24A-HR SMCJ26A-HR SMCJ28A-HR SMCJ30A-HR SMCJ33A-HR SMCJ36A-HR SMCJ40A-HR SMCJ43A-HR SMCJ45A-HR SMCJ48A-HR SMCJ51A-HR SMCJ54A-HR SMCJ58A-HR SMCJ60A-HR SMCJ64A-HR SMCJ70A-HR SMCJ75A-HR SMCJ78A-HR SMCJ85A-HR SMCJ90A-HR SMCJ100A-HR SMCJ110A-HR SMCJ120A-HR SMCJ130A-HR SMCJ150A-HR SMCJ154A-HR SMCJ160A-HR SMCJ170A-HR Part Number (Bi) SMCJ5.0CA-HR SMCJ6.0CA-HR SMCJ6.5CA-HR SMCJ7.0CA-HR SMCJ7.5CA-HR SMCJ8.0CA-HR SMCJ8.5CA-HR SMCJ9.0CA-HR SMCJ10CA-HR SMCJ11CA-HR SMCJ12CA-HR SMCJ13CA-HR SMCJ14CA-HR SMCJ15CA-HR SMCJ16CA-HR SMCJ17CA-HR SMCJ18CA-HR SMCJ20CA-HR SMCJ22CA-HR SMCJ24CA-HR SMCJ26CA-HR SMCJ28CA-HR SMCJ30CA-HR SMCJ33CA-HR SMCJ36CA-HR SMCJ40CA-HR SMCJ43CA-HR SMCJ45CA-HR SMCJ48CA-HR SMCJ51CA-HR SMCJ54CA-HR SMCJ58CA-HR SMCJ60CA-HR SMCJ64CA-HR SMCJ70CA-HR SMCJ75CA-HR SMCJ78CA-HR SMCJ85CA-HR SMCJ90CA-HR SMCJ100CA-HR SMCJ110CA-HR SMCJ120CA-HR SMCJ130CA-HR SMCJ150CA-HR SMCJ154CA-HR SMCJ160CA-HR SMCJ170CA-HR Marking UNI GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER GET GEV GEX GEZ GFE GFG GFK GFM GFP GFR GFT GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHN GHP GHR BI BDE BDG BDK BDM BDP BDR BDT BDV BDX BDZ BEE BEG BEK BEM BEP BER BET BEV BEX BEZ BFE BFG BFK BFM BFP BFR BFT BFV BFX BFZ BGE BGG BGK BGM BGP BGR BGT BGV BGX BGZ BHE BHG BHK BHM BHN BHP BHR Reverse Stand off Voltage VR (Volts) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 154 160.0 170.0 Breakdown Voltage VBR (Volts) @ IT MIN 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 172 178.00 189.00 MAX 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 190 197.00 209.00 (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 249 259.0 275.0 163.0 145.7 134.0 125.0 116.3 110.3 104.2 97.4 88.3 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 31.0 28.2 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 11.0 10.3 9.3 8.5 7.8 7.2 6.2 6.1 5.8 5.5 800 800 500 200 100 50 20 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Test Current IT Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: 1. Each lot of parts will pass group B test requirement. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20 TVS Diodes Surface Mount – 1500W > SMCJ-HR Series Screen Process 100% vision inspection MIL-STD-750 method 2074 100%High Temperature Storage Life (168hrs,150C) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature cycle test (-55-150C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2X) JEDEC J-STD-020 100% surge test (2x) MIL-STD-750 method 4066 100% HTRB(150C, Bias=VR(80% breakdown voltage), 96hrs),for Bi-direction products, 96hrs for each direction MIL–STD–750 method 1038 Final electrical test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service Group B Test Requirement Screen Method Condition Requirement Surge test 10/1000 µs Peak Pluse Waveform Maximum Clamping Voltage (VC) @ Peak Plus Current (IPP) Burn - In (HTRB) MIL -STD-750, Method 1038.5 Applied Voltage 100% VR@150°C Electrical test -- IR@VR, V(BR)@IT Sample size 45 perform 10x Accept 0 failures Sample size 45 340 hours (680 hours for bi-direction products, each direction 340 hours) Accept 0 failures Sample size 45 Accept 0 failures I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT V Ipp PPPM VR VBR VC IR VF Vc VBR VR IT IR IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20 TVS Diodes Surface Mount – 1500W > SMCJ-HR Series Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating 100 PPPM-Peak Pulse Power (kW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 10 0.31x0.31" (8.0x8.0mm) Copper Pad Area 1 0.000001 0.00001 Time Figure 3 - Pulse Derating Curve 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 0.001 Figure 4 - Pulse Waveform 100 80 60 40 20 0 0.0001 td-Pulse Width (sec.) 0 25 50 75 100 125 150 tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 175 TA-Ambient temperature (ºC) 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 6 - Steady State Power Dissipation Derating Curve Figure 5 - Typical Junction Capacitance Bi-directional V=0V Cj (pF) 10000 1000 Uni-directional V=0V Uni-directional @VR 100 Bi-directional @VR 10 1 1.0 Tj=25C f=1.0MHz Vsig=50mVp-p 10.0 100.0 VBR - Reverse Breakdown Voltage (V) 1000.0 PM(AV), Steady Sate Power Dissipation (W) 100000 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 TA - Ambient Temperature (ºC) 175 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20 TVS Diodes Surface Mount – 1500W > SMCJ-HR Series IFSM - Peak Forward Surge Current (A) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 200 180 160 140 120 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz Soldering Parameters Pre Heat Lead–free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Weight Case Polarity Terminal 0.007 ounce, 0.21 grams JEDEC DO214AB. Molded plastic body over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Matte Tin-plated leads, Solderable per JESD22-B102 tp TP Ramp-up TL Temperature (T) Reflow Condition Critical Zone TL to TP tL Ts(max) Ts(min) Ramp-down ts Preheat 25˚C t 25˚C to Peak Time (t) Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-B106 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20 TVS Diodes Surface Mount – 1500W > SMCJ-HR Series Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) A C A B H D F E K J L I G Inches Millimeters Min Max Min Max 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 2.620 D 0.079 0.103 2.060 E 0.030 0.060 0.760 1.520 F 0.002 0.008 0.051 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 - I 0.129 - 3.300 J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - Solder Pads (all dimensions in mm) Part Numbering System Part Marking System SMCJ XXX C A -HR F Cathode Band High Reliability Littelfuse Logo 5% Voltage Tolerance XXXX YMXXX Bi-Directional Voltage Series Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Package DO-214AB Part number SMCJxxxXX-HR Packaging Option Tape & Reel – 16mm tape/7” reel Quantity 500 Packaging Specification EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 (8.0) 0.059 DIA (1.5) Cover tape 7.0 (187) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/10/20