SMD1812P110TFA

POLYFUSE® RESETTABLE FUSES Specifications SMD Type, 6 V - 60 V Standard Packaging A Materials Terminals: UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Approvals cULus Recognition TÜV Features This product line is also designed for surface- mount applications. The products with 1812-mil footprint range in hold currents from 0.1 A to 2.6 A and voltage from 6 V to 60 V. These devices are suited for PC mother board, computer peripheral products and general electronics applications. Suitable for reflow soldering. Dimensions (mm) Solder pad Layout (mm) 3.45 * 3.15 1.78 1.78 Dimensions (mm) Model A Min Max SMD1812P010TS/TF SMD1812P014TS/TF SMD1812P020TS/TF SMD1812P050TS/TF SMD1812P075TS/TF SMD1812P075TS/TF/24 SMD1812P110TS/TF SMD1812P110TS/TF/16 SMD1812P125TS/TF SMD1812P150TS/TF SMD1812P150TF/12 SMD1812P160TS/TF SMD1812P160TS/TF/8 SMD1812P200TS/TF SMD1812P260TS/TF 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.37 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 4.73 B Min Max 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.07 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 3.41 C Min Max 0.75 0.75 0.55 0.50 0.50 0.75 0.50 0.75 0.75 0.75 0.75 0.75 0.75 0.75 1.00 1.25 1.95 1.00 0.75 0.75 1.55 0.75 1.25 1.25 1.25 1.25 1.25 1.25 1.55 1.60 0.10 0.14 0.20 0.50 0.75 0.75 0.75 1.10 1.10 1.10 1.25 1.50 1.50 1.50 1.60 1.60 1.60 2.00 2.60 0.30 0.34 0.40 1.00 1.50 1.50 1.50 2.20 1.95 1.95 2.50 3.00 3.00 3.00 2.80 2.80 2.80 3.50 5.20 30 60 30 15 13.2 24 33 6 16 33 15 6 12 24 6 8 12 8 6 10/100* 10/100* 10/100* 40/100* 40/100* 40/100* 20 40/100* 40/100* 20 40/100* 40/100* 40/100* 20 40/100* 40/100* 20/100* 40/100* 40/100* Solder-plated copper TS: Solder Material: 63/37 SnPb TF: Lead free plating on request Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85 % R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only Solvent Resistance MIL-STD-202, Method 215, no change Marking “P”, Part Code * * only type "TF" D Min 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 E Min Max Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). Model Ihold ITrip Vmax. dc Imax. max. time to trip (A) (A) (A) (V) (A) (s @ A) SMD1812P010TS/TF SMD1812P014TS/TF SMD1812P020TS/TF SMD1812P050TS/TF SMD1812P075TS/TF SMD1812P075TS/TF/24 SMD1812P075TF/33 SMD1812P110TS/TF SMD1812P110TS/TF/16 SMD1812P110TF/33 SMD1812P125TS/TF SMD1812P150TS/TF SMD1812P150TF/12 SMD1812P150TF/24 SMD1812P160TS/TF SMD1812P160TS/TF/8 SMD1812P160TF/12 SMD1812P200TS/TF SMD1812P260TS/TF Blistertape and reel Ø 178 mm 1.50 @ 0.50 0.15 @ 1.50 0.02 @ 8.00 0.15 @ 8.00 0.20 @ 8.00 0.20 @ 8.00 0.20 @ 8.00 0.30 @ 8.00 0.50 @ 8.00 0.50 @ 8.00 0.40 @ 8.00 0.50 @ 8.00 0.50 @ 8.00 1.50 @ 8.00 1.00 @ 8.00 1.00 @ 8.00 1.00 @ 8.00 2.00 @ 8.00 2.50 @ 8.00 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 packaging quantity tape 0.65 0.65 0.65 0.50 0.50 0.65 0.50 0.65 0.50 0.50 0.65 0.65 0.65 0.50 0.50 Pd max. (W) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1,500 1,500 2,000 2,000 2,000 1,500 2,000 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,000 Resistance Approvals R min.(Ω) R typ.(Ω) RI max.(Ω) 1.600 1.500 0.800 0.150 0.110 0.110 0.110 0.040 0.060 0.060 0.070 0.040 0.040 0.040 0.030 0.030 0.030 0.020 0.015 7.000 4.000 2.900 0.600 0.260 0.200 0.260 0.120 0.120 0.120 0.160 0.070 0.070 0.070 0.066 0.066 0.066 0.040 0.030 15.000 6.000 5.000 1.000 0.450 0.290 0.400 0.210 0.180 0.200 0.250 0.110 0.110 0.120 0.100 0.100 0.100 0.060 0.047 • • • • • • • • • • • • • p • • • • • TÜV This product is not recommended for new designs. Please refer to Littelfuse No. 1812L. cURus SMD1812 • • • • • • • • • • • • • • • * Approvals for 100 A pending Please choose TS for SnPb and TF for Sn plating NOTE: Power dissipated from device when in the tripped state at 20 °C still air. Pd = I hold = Hold current: maximum current device will pass without tripping in 20 °C still air. Minimum resistance of device in initial (un-soldered) state. R min= I trip = Trip current: minimum current at which the device will trip in 20 °C still air. Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. R 1max= Vmax = Maximum voltage device can withstand without damage at rated current (I max) Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Specifications are subject to change without notice Order Information 040606 Qty. OrderNumber Model Packaging In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com POLYFUSE® RESETTABLE FUSES SMD1812 A 100.000 BC D EG FJ I H A:SMD1812P010TS/TF B:SMD1812P014TS/TF C:SMD1812P020TS/TF D:SMD1812P050TS/TF E:SMD1812P075TS/TF F:SMD1812P075TS/TF/24 G:SMD1812P075TF/33 H:SMD1812P110TS/TF I:SMD1812P110TS/TF/16 J:SMD1812P110TF/33 Time to Trip (sec.) 10.000 1.000 0.100 0.010 0.10 1.00 10.00 100.00 Fault Current (Amp.) EC ADB F G H 100.000 A:SMD1812P125TS/TF B:SMD1812P150TS/TF C:SMD1812P150TF/12 D:SMD1812P150TF/24 E:SMD1812P160TS/TF F:SMD1812P160TS/TF/8 G:SMD1812P160TF/12 H:SMD1812P200TS/TF I:SMD1812P260TS/TF I Time to Trip (sec.) 10.000 1.000 0.100 0.010 1.00 10.00 Fault Current (Amp.) Thermal Derating Chart Model SMD1812P010TS/TF SMD1812P014TS/TF SMD1812P020TS/TF SMD1812P050TS/TF SMD1812P075TS/TF SMD1812P075TS/TF/24 SMD1812P110TS/TF SMD1812P110TS/TF/15 SMD1812P110TS/TF/16 SMD1812P125TS/TF SMD1812P150TS/TF SMD1812P160TS/TF SMD1812P200TS/TF SMD1812P260TS/TF 040606 100.00 Ambient Operation Temperature - Ihold (A) -40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C 0.16 0.23 0.29 0.77 1.15 1.06 1.59 1.58 1.58 2.00 2.30 2.27 3.08 4.00 0.14 0.19 0.26 0.68 1.01 0.95 1.43 1.43 1.43 1.75 2.03 2.05 2.71 3.52 0.12 0.17 0.23 0.59 0.88 0.84 1.26 1.27 1.27 1.52 1.76 1.83 2.35 3.06 0.01 0.14 0.20 0.50 0.75 0.75 1.10 1.10 1.10 1.25 1.50 1.60 2.00 2.60 0.08 0.12 0.17 0.44 0.65 0.60 0.95 0.95 0.95 1.00 1.25 1.35 1.80 2.34 0.07 0.10 0.15 0.40 0.60 0.55 0.87 0.85 0.85 0.95 1.10 1.25 1.60 2.08 0.06 0.09 0.14 0.37 0.55 0.50 0.80 0.77 0.77 0.90 1.00 1.15 1.50 1.95 0.05 0.08 0.12 0.33 0.49 0.45 0.71 0.71 0.71 0.75 0.80 1.00 1.07 1.39 0.03 0.06 0.10 0.29 0.43 0.37 0.60 0.58 0.58 0.53 0.60 0.85 0.80 1.04 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com