SMDJ10A-HR

TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W RoHS Pb e3 Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features Bi-directional ■ Low incremental surge ■ 3000W peak pulse power resistance capability at 10/1000μs waveform, repetition rate (duty ■ Typical I ≤ 2μA for V >10V R R cycles):0.01% ■ Meet MSL level1, per ■ For surface mounted J-STD-020, LF maximun peak applications in order to of 260°C optimize board space ■ UL Recognized compound ■ Low profile package meeting flammability rating ■ Built-in strain relief V-0. Additional Information ■ V  BR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value is 0.1%) ■ Matte tin lead–free plated ■ Halogen free and RoHS compliant ■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is ■ Fast response time: typically tin(Sn) (IPC/JEDEC J-STDless than 1.0ps from 0V to VBR 609A.01) min ■ Glass passivated chip junction Resources Accessories Samples ■ Excellent clamping capability Agency Approvals Agency Agency File Number Applications E230531 TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 3000 W Power Dissipation on infinite heat sink at TL=50°C PD 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5 V TJ , TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead RƟJL 15 °C/W Typical Thermal Resistance Junction to Ambient RƟJA 75 °C/W Peak Pulse Power Dissipation by 10/1000µs waveform (Note 1), (Note 2) Operating Junction and Storage Temperature Range Functional Diagram Bi-directional Cathode Anode Uni-directional Notes: 1. Non-repetitive current pulse per Fig. 2 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle=4 per minute maximum. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Electrical Characteristics Part Number (Uni) SMDJ5.0A-HR SMDJ6.0A-HR SMDJ6.5A-HR SMDJ7.0A-HR SMDJ7.5A-HR SMDJ8.0A-HR SMDJ8.5A-HR SMDJ9.0A-HR SMDJ10A-HR SMDJ11A-HR SMDJ12A-HR SMDJ13A-HR SMDJ14A-HR SMDJ15A-HR SMDJ16A-HR SMDJ17A-HR SMDJ18A-HR SMDJ20A-HR SMDJ22A-HR SMDJ24A-HR SMDJ26A-HR SMDJ28A-HR SMDJ30A-HR SMDJ33A-HR SMDJ36A-HR SMDJ40A-HR SMDJ43A-HR SMDJ45A-HR SMDJ48A-HR SMDJ51A-HR SMDJ54A-HR SMDJ58A-HR SMDJ60A-HR SMDJ64A-HR SMDJ70A-HR SMDJ75A-HR SMDJ78A-HR SMDJ85A-HR SMDJ90A-HR SMDJ100A-HR SMDJ110A-HR SMDJ120A-HR SMDJ130A-HR SMDJ150A-HR SMDJ170A-HR Part Number (Bi) SMDJ5.0CA-HR SMDJ6.0CA-HR SMDJ6.5CA-HR SMDJ7.0CA-HR SMDJ7.5CA-HR SMDJ8.0CA-HR SMDJ8.5CA-HR SMDJ9.0CA-HR SMDJ10CA-HR SMDJ11CA-HR SMDJ12CA-HR SMDJ13CA-HR SMDJ14CA-HR SMDJ15CA-HR SMDJ16CA-HR SMDJ17CA-HR SMDJ18CA-HR SMDJ20CA-HR SMDJ22CA-HR SMDJ24CA-HR SMDJ26CA-HR SMDJ28CA-HR SMDJ30CA-HR SMDJ33CA-HR SMDJ36CA-HR SMDJ40CA-HR SMDJ43CA-HR SMDJ45CA-HR SMDJ48CA-HR SMDJ51CA-HR SMDJ54CA-HR SMDJ58CA-HR SMDJ60CA-HR SMDJ64CA-HR SMDJ70CA-HR SMDJ75CA-HR SMDJ78CA-HR SMDJ85CA-HR SMDJ90CA-HR SMDJ100CA-HR SMDJ110CA-HR SMDJ120CA-HR SMDJ130CA-HR SMDJ150CA-HR SMDJ170CA-HR Marking Uni Bi RDE RDG RDK PDM PDP PDR PDT PDV PDX PDZ PEE PEG PEK PEM PEP PER PET PEV PEX PEZ PFE PFG PFK PFM PFP PFR PFT PFV PFX PFZ RGE PGG PGK PGM PGP PGR PGT PGV PGX PGZ PHE PHG PHK PHM PHR DDE DDG DDK DDM DDP DDR DDT DDV DDX DDZ DEE DEG DEK DEM DEP DER DET DEV DEX DEZ DFE DFG DFK DFM DFP DFR DFT DFV DFX DFZ DGE DGG DGK DGM DGP DGR DGT DGV DGX DGZ DHE DHG DHK DHM DHR Reverse Stand off Voltage VR (Volts) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 170.0 Min Max (mA) Maximum Clamping Voltage VC @ Ipp (V) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 189.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 275.0 Breakdown Voltage VBR (Volts) @ IT Test Current IT Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) Agency Approval 326.1 291.3 267.9 250.0 232.6 220.6 208.3 194.8 176.5 164.8 150.8 139.5 129.3 123.0 115.4 108.7 102.7 92.6 84.5 77.1 71.3 66.1 62.0 56.3 51.6 46.5 43.2 41.3 38.8 36.4 34.4 32.1 31.0 29.1 26.5 24.8 23.8 21.9 20.5 18.5 16.9 15.5 14.4 12.3 10.9 800 800 500 200 100 50 20 10 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: 1. Each lot of parts will pass group B test requirements. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Screen Process MIL-STD-750 method 2074 MIL-STD-750 method 1031 MIL-STD-750 method 2076 MIL-STD-750 method 1051 JEDEC J-STD-020 MIL-STD-750 method 4066 MIL–STD–750 method 1038 MIL-STD-750 method 4016.4021.4011 100% Vision Inspection 100% High Temperature Storage Life (168hrs,175°C) 100% X-RAY inspection 100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) 100% Reflow (2X) 100% Surge Test (2x) 100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each direction 96hrs for Bi-directional products) Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service Group B Test Requirements Screen Method Condition Requirement Surge test 10/1000 µs Peak Pulse Waveform Maximum clamping Voltage (VC) @ Peak Pulse Current (IPP) Burn - In (HTRB) MIL -STD-750, Method 1038.5 Applied voltage 100% VR@150°C Electrical test -- IR@VR, V(BR)@IT Sample Size 45 perform 10x Accept 0 failures Sample size 45 340 hours (680 hours for bi-direction products, each direction 340 hours) Accept 0 failures Sample size 45 Accept 0 failures I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR VF IT Vc VBR VR V Ipp PPPM VR VBR VC IR VF IT IR IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 TVS Transients Clamping Waveform Figure 2 Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (kW) 1000 Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.31x0.31" (8.0x8.0mm) Copper Pad Area 0.1 0.001 0.01 Time Figure 4 Pulse Waveform Figure 3 Pulse Derating Curve 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) tr=10µsec Half Value IPPM IPPM ( ) 2 50 0 175 PM(AV), Steady Sate Power Dissipation (W) Bi-direconal V=0V Uni-direconal V=VR Bi-direconal V=VR 100 10 1 1 10 100 td 1.0 0 2.0 3.0 4.0 Figure 6 Steady State Power Derating Curve Uni-direconal V=0V 1000 10/1000µsec. Waveform as defined by R.E.A t-Time (ms) 100000 10000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Figure 5 Typical Junction Capacitance Cj(pF) 10 0.1 1 td-Pulse Width (ms) 1000 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature(ºC) VBR - Reverse Breakdown Voltage(V) 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Figure 7 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only IFSM - Peak Forward Surge Current (A) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Ramp-up TL 217°C 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Case Polarity Terminal tL Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Physical Specifications Weight tp TP Temperature (T) Reflow Condition Environmental Specifications 0.007 ounce, 0.21 grams JEDEC DO214AB. Molded plastic body over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Matte Tin-plated leads, Solderable per JESD22-B102 High Temp. Storage HTRB Thermal Shock MSL H3TRB RSH 5 JESD22-A103 JESD22-A108 JESD22-A106 JEDEC-J-STD-020, Level 1 JESD22-A101 JESD22-A111 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Part Numbering System Part Marking System SMDJ XXX C A -HR Cathode Band F (for Uni-directional products only) High Reliability 5% Voltage Tolerance Littelfuse Logo XXX Bi-Directional Marking Code YMXXX Trace Code Marking Voltage Y:Year Code M: Month Code XXX: Lot Code Series Packaging Part number Component Package Quantity Packaging Option Packaging Specification SMDJxxxXX-HR DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) C A B H D F E G J K L Inches Millimeters Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F 0.002 0.008 0.051 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 K - 0.165 L 0.094 - 4.200 2.400 - I Solder Pads (all dimensions in mm) 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 (8.0) 0.059 DIA (1.5) Cover tape 7.0 (187) Dimensions are in inches (and millimeters). 0.80 (20.2) Arbor Hole Dia. Direction of Feed 0.65 (16.4) RTCA/DO-160G Wave 4 RTCA/DO-160G Wave 3 Notes: 1. Voltage and current are not required to be in phase. 2. The waveshape may have either a damped sine or cosine waveshape. RTCA/DO-160G Wave 5 7 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet SMDJ-HR Series Surface Mount – 3000W Pin Injection Protection Per RTCA/DO-160G 25C Part Number (Uni) Part Number (Bi) Wave 3 L5 70C Wave 4 (6.4/69us) L3 L4 Wave 5a Wave (40/120us) 3 L5 L3 L4 L5 120C Wave 4 (6.4/69us) L3 L4 Wave 5a Wave (40/120us) 3 L5 L3 L4 L5 Wave 4 (6.4/69us) L3 L4 Wave 5a (40/120us) L5 L3 L4 128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A SMDJ5.0A-HR SMDJ6.0A-HR SMDJ6.5A-HR SMDJ7.0A-HR SMDJ7.5A-HR SMDJ8.0A-HR SMDJ8.5A-HR SMDJ9.0A-HR SMDJ10A-HR SMDJ11A-HR SMDJ12A-HR SMDJ13A-HR SMDJ14A-HR SMDJ15A-HR SMDJ16A-HR SMDJ17A-HR SMDJ18A-HR SMDJ20A-HR SMDJ22A-HR SMDJ24A-HR SMDJ26A-HR SMDJ28A-HR SMDJ30A-HR SMDJ33A-HR SMDJ36A-HR SMDJ40A-HR SMDJ43A-HR SMDJ45A-HR SMDJ48A-HR SMDJ51A-HR SMDJ54A-HR SMDJ58A-HR SMDJ60A-HR SMDJ64A-HR SMDJ70A-HR SMDJ75A-HR SMDJ78A-HR SMDJ85A-HR SMDJ90A-HR SMDJ100A-HR SMDJ110A-HR SMDJ120A-HR SMDJ130A-HR SMDJ150A-HR SMDJ5.0CA-HR SMDJ6.0CA-HR SMDJ6.5CA-HR SMDJ7.0CA-HR SMDJ7.5CA-HR SMDJ8.0CA-HR SMDJ8.5CA-HR SMDJ9.0CA-HR SMDJ10CA-HR SMDJ11CA-HR SMDJ12CA-HR SMDJ13CA-HR SMDJ14CA-HR SMDJ15CA-HR SMDJ16CA-HR SMDJ17CA-HR SMDJ18CA-HR SMDJ20CA-HR SMDJ22CA-HR SMDJ24CA-HR SMDJ26CA-HR SMDJ28CA-HR SMDJ30CA-HR SMDJ33CA-HR SMDJ36CA-HR SMDJ40CA-HR SMDJ43CA-HR SMDJ45CA-HR SMDJ48CA-HR SMDJ51CA-HR SMDJ54CA-HR - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass pass pass pass pass - pass pass pass - pass pass pass - pass pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass pass - pass - pass - pass pass - pass - pass - pass - pass - pass - pass - pass - Note: 1. L1 = Level1, L2 = Level 2, L3 = Level 3, L4 = Level 4, L5 = Level 5 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 8 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21