SP1103C-01UTG

TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP1103C Series SP1103C 80A Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SP1103C includes TVS diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide a high level of protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust diodes can safely absorb repetitive ESD strikes at ±30kV (contact discharge, IEC 61000-4-2) without performance degradation. Additionally, each diode can safely dissipate 80A of 8/20ms surge current (IEC 61000-4-5, 2nd edition) with very low clamping voltages. Pinout and Functional Block Diagram PIN 1 Features • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air • Low clamping voltage • EFT, IEC 61000-4-4, 40A (5/50ns) • AEC-Q101 qualified • Lightning, IEC 610004-5 2nd edition, 80A (tP=8/20μs) • Low leakage current • Moisture Sensitivity Level(MSL -1) • Halogen free, Lead free and RoHS compliant Applications • Switches / Buttons PIN 2 • Test Equipment / Instrumentation • Point-of-Sale Terminals • Notebooks / Desktops / Servers • Computer Peripherals • Automotive Electronics • Medical Equipment Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/13/20 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP1103C Series Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs) 720 W TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. SP1103C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 3.3 V Breakdown Voltage VBR IR=1mA 3.4 3.8 5.0 V Leakage Current ILEAK VR=3.3V - - 1.0 μA Clamp Voltage1 VC V Dynamic Resistance2 IPP=40A, tp=8/20µs, Fwd - 6 - IPP=80A, tP=8/20μs, Fwd - 9 - V RDYN TLP, tP=100ns, I/O to GND - 0.01 - Ω Peak Pulse Current Ipp tp=8/20µs - - 80 A ESD Withstand Voltage1 VESD Diode Capacitance1 CD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Reverse Bias=0V, f=1MHz - 130 - pF Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns I-V Curve Characteristics VR I Bi-directional Ipp Vc VBR VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IT IR IR IT VR VBR Vc V IR Reverse Leakage Current -- Current measured at VR Ipp © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/13/20 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP1103C Series 8/20μs Pulse Waveform Power Derating Curve 110 100% 100 90% 90 % of Rated Power IPP 110% Percent of IPP 80% 70% 60% 50% 40% 80 70 60 50 40 30 30% 20 20% 10 10% 0 0% 0.0 5.0 10.0 15.0 20.0 25.0 0 25 50 30.0 125 150 Non-Repetitive Peak Pulse Power vs. Pulse Time 7.0 10 Peak Pulse Power - P pk (kW) 6.0 Clamp Voltage (VC) 100 Ambient Temperature - TA(ºC) Time (μs) Clamping Voltage vs IPP 75 5.0 4.0 3.0 2.0 1 0.1 1.0 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 0.01 0.1 1 Peak Pulse Current - IPP(A) 25 0 20 -5 15 -10 10 5 0 1000 Negative Transmission Line Pulsing (TLP) Plot TLP Current (A) TLP Current (A) Positive Transmission Line Pulsing (TLP) Plot 10 100 Pulse Duration - t p (µs) -15 -20 -25 0 2 4 TLP Voltage (V) 6 8 -8 -6 -4 -2 0 TLP Voltage (V) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/13/20 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP1103C Series IEC 61000−4−2 +8 kV Contact ESD Clamping Voltage IEC 61000−4−2 -8 kV Contact ESD Clamping Voltage Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C +0/-5 °C Part Marking System Part Code TL T S(max) tL Ramp-dow Ramp-down Preheat T S(min) tS 25 time to peak temperature Time Part Numbering System SP 1103C AFK x PIN1 Critical Zone TL to TP Ramp-up Average ramp up rate (Liquidus) Temp (TL) to peak Reflow tP TP Temperature Reflow Condition TVS Diode Arrays (SPA® Diodes) Date Code Assembly Site – 01 U T G G= Green T= Tape & Reel Series Ordering Information Part Number Package Marking Min. Order Qty. SP1103C-01UTG 1.6x1.0mm DFN AFKx 3000 Number of Channels Package U: 1.6x1.0mm DFN © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/13/20 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP1103C Series Package Dimensions D L 1.6x1.0mm DFN 1 2 1 2 e Top View Pin1 h E b Symbol h Bottom View A A1 1.70 0.58 0.58 Millimeters Min Nor Max A 0.45 0.50 0.55 A1 - 0.02 0.05 D 1.55 1.60 1.65 E 0.95 1.00 1.05 b 0.75 0.80 0.85 L 0.35 0.40 0.45 1.10 BSC e 0.15 h 0.20 0.25 1.00 Side View Recommended Soldering pad layout (mm) 0.1 Embossed Carrier Tape & Reel Specification Do 0.02 + 0.10 0.00 2.00 Y P2 0.05(I) PO 4.00 0.1(II) X KO SECTION Y-Y AO Y P1 W 0.50 ±0.05 F(III) BO D1 1.50 E1 1.75 T 0.20 X ° F3 RE User Feeding Direction SECTION X-X Symbol Pin 1 Location Millimeters A0 1.14 +/- 0.03 B0 1.75 +/- 0.03 K0 0.67 +/- 0.05 F 3.50 +/- 0.05 P1 2.00 +/- 0.10 W 8.00 +/- 0.10 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/13/20