SPD2-PV15-3P0-R

Surge Protection Devices SPD2 PV SERIES Type 2/Type 1CA Pluggable Multi-Pole for PV Systems Description Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. Visual Life Indicator The surge protection devices for solar string box and inverter applications are available in 1100 and 1500 VDC in the 3+0 configuration. Features & Benefits FEATURES Pluggable RC Connector Internal Configuration +/- TD -/+ TD TD Capability to clamp and withstand high-energy transients BENEFITS Ensures low-residual voltage during high-energy surge events and higher nominal discharge current to prevent disruption, downtime, and degradation or damage to equipment UL and VDE-IEC compliant in single part number One component can be utilized globally, reducing inventory needs and simplifying allocation of parts Interlocking tab mechanism Secures module to withstand vibration No additional overcurrent protection devices required in UL applications Reduces the number of components and costs required for protection Compact footprint Increases panel design flexibility Visual life indicator Quick visual determines module replacement status to avoid loss of protection Pluggable modules Fast and simple to replace, minimizing maintenance and downtime. No tools required Thermal protection Eliminates catastrophic failure IP20 protection rating Finger-safe design increases worker protection RC 14 11 12 Legend Protective Earth RC Remote Contacts TD Thermal Disconnection Module and Base Ordering Information IEC Electrical UL Electrical Maximum Continuous Operating DC Voltage (UCPV) Nominal Discharge Current (8/20 µs) (In) Maximum Discharge Current (8/20 µs) (Imax) Total Discharge Current (ITotal) Voltage Protection Level (Up) ShortCircuit Current Rating (ISCPV) Maximum Permitted DC Voltage (Ipvdc) Voltage Protection Rating (VPR) Nominal Discharge Current (8/20 µs) (In) ShortCircuit Current Rating (SCCR) SPD2-PV11-3P0-R 1100 V 20 kA 40 kA 50 kA 3800 V 11 kA 1100 V 2500 V 20 kA 50 kA SPD2-PV15-3P0-R 1500 V 20 kA 30 kA 40 kA 5000 V 11 kA 1500 V 4000 V 20 kA 65 kA Ordering Number Littelfuse.com 1 of 2 © 2019 Littelfuse Protection Relays & Controls Rev: 1-A-010319 Surge Protection Devices SPD2 PV SERIES Replacement Module Ordering Information IEC Electrical UL Electrical Maximum Continuous Operating DC Voltage (UCPV) Nominal Discharge Current (8/20 µs) (In) Maximum Discharge Current (8/20 µs) (Imax) Total Discharge Current (ITotal) Voltage Protection Level (Up) ShortCircuit Current Rating (ISCPV) Maximum Permitted DC Voltage (Ipvdc) Voltage Protection Rating (VPR) Nominal Discharge Current (8/20 µs) (In) ShortCircuit Current Rating (SCCR) SPD2-PV550-M 1100 V 20 kA 40 kA 50 kA 3800 V 11 kA 1100 V 2500 V 20 kA 50 kA 71 g (0.157 lb) SPD2-PV750-M 1500 V 20 kA 30 kA 40 kA 5000 V 11 kA 1500 V 4000 V 20 kA 65 kA 87 g (0.192 lb) Ordering Number Single Unit Weight Specifications Mode of Protection ( + ) - PE, ( - ) - PE, ( + ) - ( - ) Nominal Discharge Current (8/20 µs) (In) 20 kA Maximum Discharge Current (8/20 µs) (Imax) Up to 40 kA Protective Elements High Energy MOV Response Time (t A) < 25 ns Number of Ports 1 Mechanical & Environmental Operating Temperature Range (Ta) -40°C to +80°C (-40°F to +185°F) Permissible Operating Humidity (RH) 5% to 95% Altitude (max) 4,000 m (13,123 ft) Terminal Screw Torque) (Mmax) 4.5 Nm (39.9 lbf-in) Conductor Cross Section (max) 35 mm² (2 AWG) (Solid, Stranded)/ 25 mm2 (4 AWG) (Flexible) Mounting 35 mm DIN Rail, EN60715 Degree of Protection IP20 (built-in) Housing Material Thermoplastic: Extinguishing Degree UL 94 V-0 Thermal Protection Yes Operating State/Fault Indication Green Flag/No Green Flag Remote Contact Switching Capacity AC: 250 V/1 A, 125 V/1 A; DC: 48 V/0.5 A, 24 V/0.5 A, 12 V/0.5 A Remote Contact Conductor Cross Section (max) 1.5 mm2 (16 AWG) (Solid) Standards Passed EN 50539-11:2013+A1:2014 UL 1449 4th Edition Product Dimensions 3TE Module and Base 1TE Replacement Module Package Dimensions 3TE Module and Base 1TE Replacement Module H 90.0 mm (3.54”); W 54.0 mm (2.13”); D 70.0 mm (2.76”) H 45.0 mm (1.77”); W 18.0 mm (0.71”); D 57.2mm (2.25”) H 102.0 mm (4.01”); W 64.0 mm (2.52”); D 110.0 mm (4.33”) H 102.0 mm (4.01”); W 28.0 mm (1.10”); D 110.0 mm (4.33”) Warranty – Visit www.littelfuse.com/warranty for details. Disclaimer Notice – Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/product-disclaimer. Littelfuse.com 2 of 2 © 2019 Littelfuse Protection Relays & Controls Rev: 1-A-010319