SPHV12-01ETG-C

TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode RoHS Pb Description The Bidirectional SPHV-C series is designed for use in portable applications, LED lighting modules, automotive applications, and low speed I/Os. It will protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients. The SPHV-C series can safely absorb repetitive ESD strikes above the maximum level of the IEC 61000-4-2 international standard (Level 4,  ±8kV contact discharge)  without performance degradation and safely dissipate up to 8A (SPHV12-C) of induced surge current (IEC 61000-4-5, 2nd Edition tP=8/20μs) with very low clamping voltages. Features & Benefits ■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air Additional Information ■ EFT, IEC 61000-4-4, 40A (5/50ns) ■ Lightning, IEC 61000-4-5 2nd Edition, 8A (tP=8/20μs, SPHV12-C) ■ Low clamping voltage Resources Accessories Samples ■ Low leakage current ■ Small SOD882 packaging helps save board space ■ AEC-Q101 Qualified ■ Halogen free, Lead free and RoHS compliant ■ Moisture Sensitivity Level(MSL -1) Applications Pinout 1 ■ LED Lighting Modules ■ Mobile & Handhelds ■ Portable Instrumentation ■ RS232 / RS485 ■ General Purpose I/O ■ CAN and LIN Bus Functional Block Diagram 2 1 2 Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21 TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode Absolute Maximum Ratings Symbol Parameter Value Ppk Peak Pulse Power (tp=8/20μs) 200 Units W TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. SPHV12-C Electrical Characteristics (TOP=25ºC) Parameter Symbol Reverse Standoff Voltage Test Conditions Min Typ Max Units 12.0 V VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=12V 1.0 μA IPP=1A, tp=8/20µs, Fwd 19.0 V Clamp Voltage1 VC Dynamic Resistance2 Peak Pulse Current RDYN Ipp ESD Withstand Voltage1 Diode Capacitance1 VESD CI/O-I/O 13.3 V IPP=8A, tP=8/20μs, Fwd 25.0 TLP, tp=100ns, I/O to GND 0.48 tp=8/20µs 8.0 IEC61000-4-2 (Contact Discharge) ±30 IEC61000-4-2 (Air Discharge) ±30 V Ω A kV kV Reverse Bias=0V, f=1MHz 30 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. SPHV15-C Electrical Characteristics (TOP=25ºC) Parameter Symbol Reverse Standoff Voltage Test Conditions Min Typ Max Units 15.0 V VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=15V 1.0 μA IPP=1A, tp=8/20µs, Fwd 22.0 V IPP=5A, tp=8/20µs, Fwd 30.0 V Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 16.7 RDYN TLP, tp=100ns, I/O to GND Ipp tp=8/20µs VESD CI/O-I/O V 0.43 Ω 5.0 A IEC61000-4-2 (Contact Discharge) ±30 kV IEC61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 24 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21 TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode SPHV24-C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Reverse Standoff Voltage Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance Max Units 24.0 V VR=24V 1.0 μA IPP=1A, tp=8/20µs, Fwd 36.0 V IPP=3A, tp=8/20µs, Fwd 50.0 V TLP, tp=100ns, I/O to GND Ipp tp=8/20µs VESD Typ 26.7 RDYN V 0.65 Ω 3.0 A IEC61000-4-2 (Contact Discharge) ±24 kV IEC61000-4-2 (Air Discharge) ±30 kV CI/O-I/O 1 Min Reverse Bias=0V, f=1MHz 17 pF Max Units Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. SPHV36-C Electrical Characteristics (TOP=25ºC) Parameter Symbol Reverse Standoff Voltage Test Conditions VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Clamp Voltage1 VC Dynamic Resistance2 Diode Capacitance1 VESD 36.0 V VR=36V 1.0 μA IPP=1A, tp=8/20µs, Fwd 52.0 V 65.0 V 1.33 Ω tp=8/20µs 2.0 IEC61000-4-2 (Contact Discharge) ±15 IEC61000-4-2 (Air Discharge) ±20 CI/O-I/O V 40.0 TLP, tp=100ns, I/O to GND Ipp ESD Withstand Voltage1 Typ IPP=2A, tp=8/20µs, Fwd RDYN Peak Pulse Current Min A kV kV Reverse Bias=0V, f=1MHz 13 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 110 100 90 % of Rated Power I PP Peak Pulse Power - Ppk (kW) 10 1 0.1 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 Pulse Duration - t p (µs) 1000 0 25 50 75 100 125 150 (o Ambient Temperature - T A C) 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21 TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode 8/20µs Pulse Waveform SPHV12-C Transmission Line Pulsing(TLP) Plot 20 100% 18 90% 16 80% 14 TLP Current (A) Percent of IPP 110% 70% 60% 50% 12 10 8 40% 6 30% 4 20% 2 10% 0% 0.0 5.0 10.0 15.0 20.0 25.0 0 30.0 0 5 10 Time (μs) SPHV15-C Transmission Line Pulsing(TLP) Plot 20 25 30 SPHV24-C Transmission Line Pulsing(TLP) Plot 20 20 18 18 16 16 14 14 TLP Current (A) TLP Current (A) 15 TLP Voltage (V) 12 10 8 12 10 8 6 6 4 4 2 2 0 0 0 5 10 15 20 25 30 0 35 5 10 15 20 25 30 35 40 45 50 55 TLP Voltage (V) TLP Voltage (V) SPHV36-C Transmission Line Pulsing(TLP) Plot 16 14 TLP Current (A) 12 10 8 6 4 2 0 0 10 20 30 40 50 60 70 80 90 100 TLP Voltage (V) 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21 TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C +0/-5 TL T S(max) tL Ramp-dow Ramp-down Preheat T S(min) tS °C 25 time to peak temperature Product Characteristics Lead Plating Lead Material Substitute Material Body Material Flammability Critical Zone TL to TP Ramp-up Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate tP TP Temperature Reflow Condition Time Ordering Information Matte Tin, Pre-Plated Frame Copper Alloy Silicon Molded Compound UL Recoginized compound meeting flammability rating V-0 Part Number SPHV12-01ETG-C SPHV15-01ETG-C SPHV24-01ETG-C SPHV36-01ETG-C Part Marking System Package Marking Min. Order Qty. SOD882 B2 B5 B4 B6 10000 Part Numbering System SPHV ** – 01 x T G – C 1 B* TVS Diode Arrays (SPA® Diodes ) 2 Voltage Number of Channels 2: SPHV12-C 5: SPHV15-C 4: SPHV24-C 6: SPHV36-C Package Bidirectional G= Green T= Tape & Reel E: SOD882 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21 TVS Diode Array Datasheet SPHV-C Series 200W Discrete Bidirectional TVS Diode Package Dimensions — SOD882(SPHVxx-01ETG-C) Package 1.20mm 0.30mm 0.45mm 0.70mm Symbol A B C D E F Recommended soldering pad layout (unit:mm) SOD882 JEDEC MO-236 Millimeters Inches Min Typ Max Min Typ Max 0.90 0.50 0.40 1.00 0.60 0.50 0.45 0.25 0.50 1.10 0.70 0.60 0.037 0.022 0.016 0.041 0.026 0.024 0.35 0.55 0.008 0.018 0.039 0.024 0.020 0.018 0.010 0.020 0.20 0.45 0.012 0.022 Embossed Carrier Tape & Reel Specification Top mark and pin 1 direction in Tape and Reel Feeding Direction Symbol Millimeters A B C d E F P P0 P1 W 0.70+/-0.045 1.10+/-0.045 0.65+/-0.045 1.55+/-0.10 1.75+/-0.05 3.50+/-0.05 2.00+/-0.10 4.00+/-0.10 2.00+/-0.10 8.00 + 0.30 -0.10 ACCESS HOLE, Ref. 14.4mm, Ref. 1 BX 180mm 2 13mm 60mm 8mm TAPE AND REEL 8.4mm, Ref. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 09/16/21