SPHV36-01ETG

TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional SPHV series is designed for use in portable applications, LED lighting modules, automotive applications, and low speed I/Os. It will protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients. The SPHV series can safely absorb repetitive ESD strikes above the maximum level of the IEC 61000-4-2 international standard (Level 4, ±8kV contact discharge) without performance degradation and safely dissipate up to 8A (SPHV12) of induced surge current (IEC 61000-4-5, 2nd Edition tP=8/20μs) with very low clamping voltages. Features Additional Information ■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air ■ Low clamping voltage ■ EFT, IEC 61000-4-4, 40A (5/50ns) ■ Small SOD882 packaging helps save board space ■ Lightning, IEC 61000-4-5, 2nd Edition 8A (tP=8/20μs, SPHV12) Resources Accessories ■ Low leakage current ■ AEC-Q101 qualifie ■ Lead-free, Halogen-free, and RoHS Compliant Applications Samples Pinout ■ LED Lighting Modules ■ Mobile & Handhelds ■ Portable Instrumentation ■ RS232 / RS485 ■ General Purpose I/O ■ CAN and LIN Bus 1 Functional Block Diagram 1 2 2 Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21 TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs) 200 W TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Caution: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. SPHV12 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=12V Reverse Standoff Voltage Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 Min Max Units 12.0 V 1.0 μA IPP=1A, tp=8/20µs, Fwd 19.0 V IPP=8A, tP=8/20μs, Fwd 25.0 V 13.3 RDYN TLP, tp=100ns, I/O to GND Ipp tp=8/20µs VESD CI/O-GND Typ V 0.37 Ω 8.0 IEC61000-4-2 (Contact Discharge) ±30 IEC61000-4-2 (Air Discharge) ±30 A kV kV Reverse Bias=0V, f=1MHz 60 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. SPHV15 Electrical Characteristics (TOP=25ºC) Parameter Reverse Standoff Voltage Symbol Test Conditions Min Typ Max Units 15.0 V VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=15V 1.0 μA IPP=1A, tp=8/20µs, Fwd 22.0 V Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 VC RDYN Ipp VESD CI/O-GND 16.7 V IPP=5A, tp=8/20µs, Fwd 28.0 TLP, tp=100ns, I/O to GND 0.40 tp=8/20µs 5.0 IEC61000-4-2 (Contact Discharge) ±30 IEC61000-4-2 (Air Discharge) ±30 Reverse Bias=0V, f=1MHz V Ω A kV kV 46 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21 TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode SPHV24 Electrical Characteristics (TOP=25ºC) Parameter Symbol Reverse Standoff Voltage Test Conditions Min Typ Max Units 24.0 V VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=24V 1.0 μA IPP=1A, tp=8/20µs, Fwd 36.0 V IPP=3A, tp=8/20µs, Fwd 50.0 Clamp Voltage1 VC Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 26.7 RDYN TLP, tp=100ns, I/O to GND Ipp tp=8/20µs VESD 0.56 ±24 IEC61000-4-2 (Air Discharge) ±30 V Ω 3.0 IEC61000-4-2 (Contact Discharge) CI/O-GND V A kV kV Reverse Bias=0V, f=1MHz 32 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. SPHV36 Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR≤1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Reverse Standoff Voltage Clamp Voltage1 Dynamic Resistance VC 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 Min Max Units 36.0 V VR=36V 1.0 μA IPP=1A, tp=8/20µs, Fwd 52.0 V IPP=2A, tp=8/20µs, Fwd 60.0 V 40.0 RDYN TLP, tp=100ns, I/O to GND Ipp tp=8/20µs VESD V 1.28 Ω 2.0 IEC61000-4-2 (Contact Discharge) ±15 IEC61000-4-2 (Air Discharge) ±20 CI/O-GND Typ A kV kV Reverse Bias=0V, f=1MHz 25 pF Note: 1. Parameter is guaranteed by design and/or device characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 110 100 90 % of Rated Power I PP Peak Pulse Power - Ppk (kW) 10 1 0.1 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 Pulse Duration - t p (µs) 1000 0 25 50 75 100 125 150 Ambient Temperature - T A (oC) 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21 TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode 8/20µs Pulse Waveform SPHV12 Transmission Line Pulsing(TLP) Plot 110% 20 100% 18 90% 16 14 TLP Current (A) 70% 60% 50% 40% 12 10 8 30% 6 20% 4 10% 2 0% 0.0 5.0 10.0 15.0 20.0 25.0 0 30.0 0 5 10 Time (μs) 18 18 16 16 14 14 TLP Current (A) TLP Current (A) 20 12 10 8 10 8 6 4 4 2 2 0 5 10 15 25 12 6 0 20 SPHV24 Transmission Line Pulsing(TLP) Plot 20 0 15 TLP Voltage (V) SPHV15 Transmission Line Pulsing(TLP) Plot 20 25 30 0 5 10 15 20 25 30 35 40 45 TLP Voltage (V) TLP Voltage (V) SPHV36 Transmission Line Pulsing(TLP) Plot 16 14 12 TLP Current (A) Percent of IPP 80% 10 8 6 4 2 0 0 10 20 30 40 50 60 70 80 90 100 TLP Voltage (V) 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21 TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C tP TP Temperature Reflow Condition TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) tS 25 time to peak temperature Product Characteristics Lead Plating Lead Material Substitute Material Body Material Flammability Critical Zone TL to TP Ramp-up Time Ordering Information Matte Tin, Pre-Plated Frame Copper Alloy Silicon Molded Compound UL Recoginized compound meeting flammability rating V-0 Part Number SPHV12-01ETG SPHV15-01ETG SPHV24-01ETG SPHV36-01ETG Part Marking System Package Marking Min. Order Qty. SOD882 U2 U5 U4 U6 10000 Part Numbering System SPHV ** – 01 E T G 1 U* 2 G= Green TVS Diode Arrays (SPA® Diodes ) Voltage Number of Channels 2: SPHV12 5: SPHV15 4: SPHV24 6: SPHV36 5 T= Tape & Reel Package E: SOD882 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21 TVS Diode Array Datasheet SPHV Series 200W Discrete Unidirectional TVS Diode Package Dimensions — SOD882(SPHVxx-01ETG) Cathode by marking Package Symbol A B C D E F 0.325 0.325 0.650 0.650 0.975 SOD882 JEDEC MO-236 Millimeters Inches Min Typ Max Min Typ Max 0.90 0.50 0.40 1.00 0.60 0.50 0.45 0.25 0.50 1.10 0.70 0.60 0.037 0.022 0.016 0.041 0.026 0.024 0.35 0.55 0.008 0.018 0.039 0.024 0.020 0.018 0.010 0.020 0.20 0.45 0.012 0.022 Recommended Soldering Pad Layout Embossed Carrier Tape & Reel Specification Millimeters A B C d E F P P0 P1 W 0.70+/-0.045 1.10+/-0.045 0.65+/-0.045 1.55+/-0.10 1.75+/-0.05 3.50+/-0.05 2.00+/-0.10 4.00+/-0.10 2.00+/-0.10 8.00 + 0.30 -0.10 ACCESS HOLE, Ref. Top mark and pin 1 direction in Tape and Reel Feeding Direction Symbol 14.4mm, Ref. 1 180mm 13mm UX 60mm 2 8mm TAPE AND REEL 8.4mm, Ref. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 04/15/21