T10A220

SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) T10A Series - DO-15 Description T10A Series are SIDACtor® devices designed protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a cost effective through-hole solution that enables equipment to comply with global regulatory standards. Features and Benefits t
Low voltage overshoot t
Fails short circuit when surged in excess of ratings t
Low on-state voltage t
Does not degrade with use Agency Approvals Agency t
Low Capacitance Agency File Number Applicable Global Standards E128662 Pinout Designation Not Applicable Schematic Symbol t
TIA-968-A t
GR 1089 Intra-building t
TIA-968-B t
IEC 61000-4-5 t
ITU K.20/21 Enhanced Level* t
YD/T 1082 t
ITU K.20/21 Basic Level t
YD/T 950 t
YD/T 993 t
GR 1089 Inter-building* *A-rated parts require series resistance Electrical Characteristics Part Number T10A060Bxx T10A060Exx T10A062xx T10A068xx T10A080Bxx T10A080Exx T10A100xx T10A110Bxx T10A110Exx T10A120xx T10A130xx T10A140Bxx T10A140Exx T10A180xx T10A180Bxx T10A180Exx T10A200xx T10A220xx Marking VDRM @lDRM=5μA VS @100V/μs V Min V Max 50 50 56 61 70 70 90 100 100 108 117 120 120 170 170 170 180 200 84 84 86 94 125 125 140 142 142 168 178 178 178 220 220 220 275 275 T10A060B T10A060E T10A062 T10A068 T10A080B T10A080E T10A100 T10A110B T10A110E T10A120 T10A130 T10A140B T10A140E T10A180 T10A180B T10A180E T10A200 T10A220 IH IS mA Min mA Max 120 180 150 150 120 180 150 120 180 150 150 120 180 150 120 180 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 IT VT @IT=2.2 Amp Capacitance @ 1MHz, 2V Bias A Max V Max pF Typ 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 50 50 50 50 43 43 43 38 38 38 38 34 34 34 32 32 30 30 Table continues on next page. © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 176 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Characteristics (continued) Part Number Marking T10A220Bxx T10A220Exx T10A240xx T10A270xx T10A270Bxx T10A270Exx VDRM @lDRM=5μA VS @100V/μs V Min V Max 200 200 216 245 245 245 275 275 330 370 370 370 T10A220B T10A220E T10A240 T10A270 T10A270B T10A270E IH IS mA Min mA Max 120 180 150 150 120 180 800 800 800 800 800 800 IT VT @IT=2.2 Amp Capacitance @ 1MHz, 2V Bias A Max V Max pF Typ 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 30 30 30 30 30 30 Notes: t
"CTPMVUF
NBYJNVN
SBUJOHT
NFBTVSFE
BU
5A= 25ºC (unless otherwise noted). t
%FWJDFT
BSF
CJEJSFDUJPOBM
VOMFTT
PUIFSXJTF
OPUFE  t
XX
1BSU
/VNCFS
4VGmT
iRPw
3FFM
1BDL
PS
Blank (Bulk Pack) Surge Ratings IPP Series A ITSM 50/60 Hz di/dt A min A min A/μs max 50 20 100 8x20 1.2x502 5x3101 10x7002 10x10001 10x10002 A min A min 100 37.5 1 Notes: 1 Current waveform in μs 2 Voltage waveform in μs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP
SBUJOHT
BQQMJDBCMF
PWFS
UFNQFSBUVSF
SBOHF
PG
$
UP
$ - The device must initially be in thermal equilibrium with -40°C < TJ