TDUS3002A

Time Delay Relays Dedicated - Single Shot TDUS SERIES Single Shot Timer Description The TDUS Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240VAC and 12 to 24VDC are available in three ranges. The TDUS Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUS Series an excellent choice for process control systems and OEM equipment. Operation (Single Shot) Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch (leading edge triggered), the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the time delay and output. Wiring Diagram L1 N/L2 V = Voltage UTL = Optional Untimed Load S1 = Initiate Switch L = Timed Load Features & Benefits FEATURES BENEFITS Microcontroller based Repeat Accuracy + / - 0.1% Compact design Allows flexiblility for OEM applications 1A steady, 10A inrush solid-state output Provides 100 million operations in typical conditions. Totally solid state and encapsulated No moving parts to arc and wear out over time and encapsulated to protect against shock, vibration, and humidity Accessories P0700-7 Versa-Knob Designed for 0.25 in (6.35 mm) shaft of Versa-Pot. Semi-gloss industrial black finish. P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. Ordering Information MODEL INPUT VOLTAGE TIME RANGE TDUS3000A 24 to 120VAC 1 - 1023s TDUS3001A 100 to 240VAC 1 - 1023s TDUS3002A 12 to 24VDC 1 - 1023s TDUSH3001A 100 to 240VAC 0.1 - 102.3m TDUSL3000A 24 to 120VAC 0.1 - 102.3s P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick connect terminals. C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91.4 cm) length. P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two #10 screws. If you don’t find the part you need, call us for a custom product 800-843-8848 © 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/ www.littelfuse.com/tdus Rev: 1-A-062116 Time Delay Relays Dedicated - Single Shot TDUS SERIES Specifications Time Delay Range* 0.1 - 102.3s in 0.1s increments 1 - 1023s in 1s increments 0.1 - 102.3m in 0.1m increments Repeat Accuracy ±0.5% or 20 ms, whichever is greater Setting Accuracy ≤ ±2% or 20 ms, whichever is greater Reset Time ≤ 150ms Initiate Time ≤ 20ms Time Delay vs. Temperature & Voltage ≤ ±5% Input Voltage/Tolerance 24 to 240VAC, 12 to 24VDC /±20% AC Line Frequency/DC Ripple 50/60 Hz / ≤ 10% Power Consumption AC ≤ 2VA; DC ≤ 1W Output Type Solid state Form NO, closed during timing Rating 1A steady state, 10A inrush at 60°C Voltage Drop AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A Off State Leakage Current AC ≅ 5mA @ 230VAC; DC ≅ 1 mA Protection Circuitry Encapsulated Dielectric Breakdown ≥ 2000V RMS terminals to mounting surface Insulation Resistance ≥ 100 MΩ Polarity DC units are reverse polarity protected Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) Termination 0.25 in. (6.35 mm) male quick connect terminals Environmental Operating/Storage Temperature -40° to 60°C / -40° to 85°C Humidity 95% relative, non-condensing Weight ≅ 2.4 oz (68 g) Adjustment Switch Operation Adjustment Switch Operation Function Diagram SINGLE SHOT (PULSE FORMER) V = Voltage S1 = Initiate Switch NO = Normally Open Contact NC = Normally Closed Contact TD = Time Delay R = Reset *For CE approved applications, power must be removed from the unit when a switch position is changed. © 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/tdus Rev: 1-A-062116